Electrochemical and Chemical Oxidation of K(C2H5OCS2), [Ni(C2H5OCS2)D And [N(C2H5)4][Ni(C2H5OCS2)3]

1997 ◽  
pp. 579-590
Author(s):  
O. Dag ◽  
A. M. Onal ◽  
H. Isci
Keyword(s):  
Chemical Oxidation

Bioadsorption of Multiple Heavy Metal Ions by Rhizophora Apiculate sp. and Elaesis Guineensis sp.

2017 ◽  
Vol 14 (1) ◽  
pp. 15
Author(s):  
M.B. Nicodemus Ujih ◽  
Mohammad Isa Mohamadin ◽  
Milla-Armila Asli ◽  
Bebe Norlita Mohammed
Keyword(s):  
Heavy Metal ◽  
Metal Ions ◽  
Removal Efficiency ◽  
Heavy Metal Ions ◽  
Agricultural Waste ◽  
Living Organism ◽  
Heavy Metal Concentration ◽  
Industrial Area ◽  
Electrochemical Treatment ◽  
Chemical Oxidation

Heavy metal ions contamination has become more serious which is caused by the releasing of toxic water from industrial area and landfill that are very harmful to all living organism especially human and can even cause death if contaminated in small amount of heavy metal concentration. Currently, peoples are using classic method namely electrochemical treatment, chemical oxidation/reduction, chemical precipitation and reverse osmosis to eliminate the metal ions from toxic water. Unfortunately, these methods are costly and not environmentally friendly as compared to bioadsorption method, where agricultural waste is used as biosorbent to remove heavy metals. Two types of agricultural waste used in this research namely oil palm mesocarp fiber (Elaesis guineensis sp.) (OPMF) and mangrove bark (Rhizophora apiculate sp.) (MB) biomass. Through chemical treatment, the removal efficiency was found to improve. The removal efficiency is examined based on four specification namely dosage, of biosorbent to adsorb four types of metals ion explicitly nickel, lead, copper, and chromium. The research has found that the removal efficiency of MB was lower than OPMF; whereas, the multiple metals ions removal efficiency decreased in the order of Pb2+ > Cu2+ > Ni2+ > Cr2+.

Effects of Wet Chemical Oxidation on Surface Functionalization and Morphology of Highly Oriented Pyrolytic Graphite

2020 ◽  
Author(s):  
Mikhail Trought ◽  
Isobel Wentworth ◽  
Timothy Leftwich ◽  
Kathryn Perrine
Keyword(s):  
Surface Functionalization ◽  
Functional Group ◽  
Pyrolytic Graphite ◽  
Surface Oxidation ◽  
Chemical Oxidation ◽  
Synthesis Methods ◽  
Acid Solutions ◽  
Highly Oriented Pyrolytic Graphite ◽  
Wet Chemical ◽  
Surface Morphologies

The knowledge of chemical functionalization for area selective deposition (ASD) is crucial for designing the next generation heterogeneous catalysis. Surface functionalization by oxidation was studied on the surface of highly oriented pyrolytic graphite (HOPG). The HOPG surface was exposed to with various concentrations of two different acids (HCl and HNO3). We show that exposure of the HOPG surface to the acid solutions produce primarily the same -OH functional group and also significant differences the surface topography. Mechanisms are suggested to explain these strikingly different surface morphologies after surface oxidation. This knowledge can be used to for ASD synthesis methods for future graphene-based technologies.

A Solvent Free Synthetic Route for Cerium(IV) Metal-Organic Frame-works with UiO-66 Architecture and Their Photocatalytic Application

2019 ◽  
Author(s):  
Matteo Campanelli ◽  
Tiziana Del Giacco ◽  
Filippo De Angelis ◽  
Edoardo Mosconi ◽  
Marco Taddei ◽  
...  
Keyword(s):  
Density Functional ◽  
Chemical Oxidation ◽  
Solvent Free ◽  
Cerium Ammonium Nitrate ◽  
Benzylic Alcohols ◽  
Near Ultraviolet ◽  
Photocatalytic Application ◽  
Activity Density ◽  
Ultraviolet Light Irradiation ◽  
Metal Organic

<div> <p>A novel solvent-free synthesis for Ce-UiO-66 metal-organic frameworks (MOFs) is presented. The MOFs are obtained by simply grinding the reagents, cerium ammonium nitrate (CAN) and the carboxylic linkers, in a mortar for few minutes with the addition of a small amount of acetic acid (AcOH) as modulator (1.75 eq, o.1 ml). The slurry is then transferred into a 1 ml vial and heated at 120°C for 1 day. The MOFs have been characterized for their composition, crystallinity and porosity and employed as heterogenous catalysts for the photo-oxidation reaction of substituted benzylic alcohols to benzaldaldehydes under near ultraviolet light irradiation. The catalytic performances, such as yield, conversion and kinetics, exceed those of similar systems studied by chemical oxidation and using Ce-MOF as catalyst. Moreover, the MOFs were found to be reusable up to three cycles without loss of activity. Density functional theory (DFT) calculations gave an estimation of the band-gap shift due to the different nature of the linkers used and provide useful information on the catalytic activity experimentally observed.</p> </div>

CHEMICAL OXIDATION OF TREATED TEXTILE EFFLUENT BY HYDROGEN PEROXIDE AND FENTON PROCESS

2010 ◽  
Vol 9 (3) ◽  
pp. 351-360 ◽  
Author(s):  
Abdelnaser Omran ◽  
Hamidi Abdul Aziz ◽  
Marniyanti Mamat Noor
Keyword(s):  
Hydrogen Peroxide ◽  
Chemical Oxidation ◽  
Textile Effluent ◽  
Fenton Process

An efficient biotreatment process for polyvinyl alcohol containing textile wastewater

2013 ◽  
Vol 8 (3-4) ◽  
pp. 469-478 ◽  
Author(s):  
Sandip S. Magdum ◽  
Gauri P. Minde ◽  
Upendra S. Adhyapak ◽  
V. Kalyanraman
Keyword(s):  
Polyvinyl Alcohol ◽  
Process Optimization ◽  
Textile Wastewater ◽  
Cost Effective ◽  
Chemical Oxidation ◽  
High Rate ◽  
Microbial Consortia ◽  
Environment Friendly ◽  
Candida Sp ◽  
Textile Wastewater Treatment

The aim of this work was to optimize the biodegradation of polyvinyl alcohol (PVA) containing actual textile wastewater for a sustainable treatment solution. The isolated microbial consortia of effective PVA degrader namely Candida Sp. and Pseudomonas Sp., which were responsible for symbiotic degradation of chemical oxidation demand (COD) and PVA from desizing wastewater. In the process optimization, the maximum aeration was essential to achieve a high degradation rate, where as stirring enhances further degradation and foam control. Batch experiments concluded with the need of 16 lpm/l and 150 rpm of air and stirring speed respectively for high rate of COD and PVA degradation. Optimized process leads to 2 days of hydraulic retention time (HRT) with 85–90% PVA degradation. Continuous study also confirmed above treatment process optimization with 85.02% of COD and 90.3% of PVA degradation of effluent with 2 days HRT. This study gives environment friendly and cost effective solution for PVA containing textile wastewater treatment.

Relationships Between Soluble and Sediment Nutrient Losses, Land Use and Types of Soil in Agricultural Watersheds

1977 ◽  
Vol 12 (1) ◽  
pp. 121-134 ◽  
Author(s):  
G.H. Neilsen ◽  
A.F. Mackenzie
Keyword(s):  
Land Use ◽  
Inorganic Nitrogen ◽  
High Surface ◽  
Sediment Concentration ◽  
Chemical Oxidation ◽  
Nutrient Loss ◽  
Potassium Sulfate ◽  
Agricultural Watersheds ◽  
Nutrient Losses ◽  
Calcium Magnesium

Abstract Seven agricultural watersheds in southwestern Quebec and southeastern Ontario, ranging in area from 2,000 to 20,000 hectares, were monitored systematically during 1973–75 for soluble inorganic nitrogen, total soluble phosphorus, calcium, magnesium, potassium, sulfate-sulfur, chemical oxidation demand, discharge, suspended sediment concentration, sediment Kjeldahl nitrogen, Bray extractable phosphorus, and ammonium acetate extractable calcium, magnesium and potassium. For 1974–75, annual Kg/ha, loss rates were calculated for the soluble and sediment associated nutrients. Losses varied with nutrient and watershed, with volume of runoff being an important control of nutrient loss variation. Significant amounts of SO4−S in precipitation were suggested by an average watershed soluble N:P:S loss ratio of 10:1:92. Sediment nutrient losses were especially important for N and P, comprising over 40% of their total loss. The importance of spring snow-melt runoff was demonstrated by the high proportion of all nutrients lost at this time. Correlations of nutrient loss, land use and soils suggested that certain land uses resulted in increased stream nutrient losses while increased watershed area of soils with a high surface runoff potential was particularly conducive to increased soluble nutrient and sediment losses.

TREATABILITY OF 2,4-D PRODUCTION WASTEWATERS

1994 ◽  
Vol 30 (3) ◽  
pp. 73-78 ◽  
Author(s):  
O. Tünay ◽  
S. Erden ◽  
D. Orhon ◽  
I. Kabdasli
Keyword(s):  
Hydrogen Peroxide ◽  
Activated Sludge ◽  
Partial Oxidation ◽  
Chloride Concentration ◽  
Chemical Oxidation ◽  
Cod Removal ◽  
Optimum Conditions ◽  
Organic Loading ◽  
Activated Sludge System ◽  
Biological Treatability

This study evaluates the characterization and treatability of 2,4-D production wastewaters. Wastewaters contain 20000-40000 mg/l COD, 17000-30000 mg/l chloride and pH is around 1.0. Chemical oxidation with hydrogen peroxide provided almost complete COD removal. The optimum conditions are 3:1 H2O2/COD oxidant dosage, 3000 mg/l Fe3+ as catalyst and pH 3. Partial oxidation at 0.5:1 H2O2//COD ratio is also effective providing 67% COD removal. A batch activated sludge system is used for biological treatability. Dilution is needed to maintain a tolerable chloride concentration which increases through COD removal. pH also increased during COD removal. 85% COD removal is obtained for the 50% dilution at an organic loading of 0.3 day‒1 on a COD basis. Completely and partially oxidized wastewaters are also treated in the activated sludge down to 30 mg/l BOD5.

Sign in / Sign up

Export Citation Format

Share Document