Work hardening of the material at the uniaxial tensile test

2001 ◽  
pp. 11-18
Author(s):  
Wojciech Truszkowski
Keyword(s):  
Tensile Test ◽  
Work Hardening ◽  
Uniaxial Tensile ◽  
Uniaxial Tensile Test

Design and development of aluminum alloy 6061-T6 pressure vessel liner for aerospace applications: A technical brief

2021 ◽  
pp. 146442072110651
Author(s):  
R Pramod ◽  
N Siva Shanmugam ◽  
C K Krishnadasan ◽  
G Radhakrishnan ◽  
Manu Thomas
Keyword(s):  
Tensile Strength ◽  
Aluminum Alloy ◽  
Weld Metal ◽  
Tensile Test ◽  
Pressure Vessel ◽  
Uniaxial Tensile ◽  
Uniaxial Tensile Test ◽  
Aluminum Alloy 6061 ◽  
Custom Made ◽  
Alloy 6061

This work mainly focuses on designing a novel aluminum alloy 6061-T6 pressure vessel liner intended for use in launch vehicles. Fabrication of custom-made welding fixtures for the assembly of liner parts, namely two hemispherical domes and end boss, is illustrated. The parts of the liner are joined using the cold metal transfer welding process, and the welding trials are performed to arrive at an optimized parametric range. The metallurgical characterization of weld joint reveals the existence of dendritic structures (equiaxed and columnar). Microhardness of base and weld metal was 70 and 65 HV, respectively. The tensile strength of base and weld metal was 290 and 197 MPa, respectively, yielding a joint efficiency of 68%. Finite-element analysis of a uniaxial tensile test was performed to predict the tensile strength and location of the fracture in base and weld metal. The experimental and predicted tensile test results were found to be in good agreement.

Effect of multiple matrix cracking on crack bridging of fiber reinforced engineered cementitious composite

2020 ◽  
Vol 54 (26) ◽  
pp. 3949-3965 ◽  
Author(s):  
Xuan Zheng ◽  
Jun Zhang ◽  
Zhenbo Wang
Keyword(s):  
Tensile Test ◽  
Crack Spacing ◽  
Matrix Cracking ◽  
Uniaxial Tensile ◽  
Uniaxial Tensile Test ◽  
Cementitious Composite ◽  
Fiber Reinforced ◽  
Crack Bridging ◽  
Engineered Cementitious Composite ◽  
Fiber Bridging

In the present paper, a modified micromechanics based model that describes the crack bridging stress in randomly oriented discontinuous fiber reinforced engineered cementitious composite is developed. In the model, effect of multiple matrix cracking on fiber embedded length, which in turn influencing fiber bridging in the composite, is taken into consideration. First, crack spacing of high strength-low shrinkage engineered cementitious composite was experimentally determined by photographing the specimen surface at some given loading points during uniaxial tensile test. The diagram of average cracking spacing and loading time of each composite is obtained based on above data. Then, fiber bridging model is modified by introducing a revised fiber embedment length as a function of crack spacing. The model is verified with uniaxial tensile test on both tensile strength and crack opening. Good agreement between model and test results is obtained. The modified model can be used in design and prediction of tensile properties of fiber reinforced cementitious composites with characteristics of multiple matrix cracking.

Performance evaluation of HDPE/MWCNT and HDPE/kenaf composites

2019 ◽  
pp. 089270571986827 ◽  
Author(s):  
Nayan Pundhir ◽  
Sunny Zafar ◽  
Himanshu Pathak
Keyword(s):  
Tensile Test ◽  
Strain Rate ◽  
Polymer Composite ◽  
Tensile Modulus ◽  
Uniaxial Tensile ◽  
Uniaxial Tensile Test ◽  
Compression Moulding ◽  
Multi Walled Carbon Nanotube ◽  
Kenaf Composites ◽  
The Impact

The present work deals with the microwave-assisted compression moulding of high-density polyethylene (HDPE)-based composites. In the present work, 20 wt% of reinforcement in the form of kenaf and multi-walled carbon nanotube (MWCNT) was used to fabricate HDPE/kenaf and HDPE/MWCNT polymer composites. The mechanical characterizations of the microwave-processed composites were carried out in terms of uniaxial tensile test with different strain rate, multistep stress relaxation, flexural and impact test. The uniaxial tensile test revealed that the tensile modulus of microwave-processed four-layered HDPE/kenaf polymer composite was 35.2% higher than that of HDPE/MWCNT polymer composite. The HDPE/MWCNT polymer composite showed a minimum of 1.25 GPa and a maximum of 4.7 GPa of elastic modulus when tested at different strain rate. The impact energy absorbed by the HDPE/kenaf polymer composite (1.055 J) was 81.12% higher than the HDPE/MWCNT polymer composite (0.582 J).

scholarly journals Random laser imaging of bovine pericardium under the uniaxial tensile test

2018 ◽  
Vol 9 (8) ◽  
pp. 3523
Author(s):  
Natanael Cuando-Espitia ◽  
Francisco Sánchez-Arévalo ◽  
Juan Hernández-Cordero
Keyword(s):  
Tensile Test ◽  
Bovine Pericardium ◽  
Uniaxial Tensile ◽  
Uniaxial Tensile Test ◽  
Random Laser ◽  
Laser Imaging

Uniaxial tensile test and wear in metals

1998 ◽  
Vol 79 (1-3) ◽  
pp. 113-124
Author(s):  
Hung-Kuk Oh ◽  
Kyu Hyun Yeon
Keyword(s):  
Tensile Test ◽  
Uniaxial Tensile ◽  
Uniaxial Tensile Test
Sign in / Sign up

Export Citation Format

Share Document