QoS Parameter Analysis of TCP and UDP Traffic Over Open Flow Enabled Software Defined Network

2021 ◽  
pp. 13-25
Author(s):  
Akhilesh Sharma ◽  
Aakanksha Sharma
2016 ◽  
Vol 78 (5) ◽  
Author(s):  
Yuli Sun Hariyani ◽  
Indrarini Dyah Irawati ◽  
Danu Dwi S. ◽  
Mohammad Nuruzzamanirridha

Open Flow is a standard protocol for differentiating forward function and control functions to facilitate the management of big network of SDN. The research have been carried out before using the emulator SDN Mininet. However Mininet has many shortcomings, such as the performance of which is less than the maximum due to simulation. Then some researchers also use the Net-FPGA as device. This device is less suitable for small scale because the prices are quite expensive and programming is quite complicated. In this study, SDN implementation carried out using OpenvSwitch as forwarding function mounted on TP-Link that has modificated using openwrt as firmware and Raspberry Pi with Ryu SDN Controller as control functions. The result shows that routing static can be implemented on SDN Network which use Raspberry Pi with Ryu Controller as control function with average bandwith 536.0909 Mbits/sec and average uptime network is 10.45 second.


2019 ◽  
Author(s):  
Girish L

Software Defined Networking (SDN),is an archetype which decouples the control plane and data plane.Data plane is used to just forward the data and control plane is used to decide how data should be forwarded. Open networking Foundation (ONF) is a group that is used in the development of SDN. For interfacing of control plane and data plane in SDN requires some protocol. One such protocol is Open Flow. The first standard interface designed for SDN is Open Flow. It provides high-performance, controlling granular traffic across multiple vendor’s network devicesAs the network infrastructure of an organization grows, it’s very difficult to manage and control such networks from a centralized system like laptop through programs. As an attempt in this paper we are adopting the SDN technology to manage and control the networks programmatically. In thispaper we are addressing the two issues for providing security to the network from DDoS mitigation and balancing of the load using SDN.In this paper for DDoS mitigation we are assigning a threshold value so that the SDN controller resists the DdoS attack programmatically. For Load balancing is to maximize throughput, minimizes response time, avoid overload by using round robin or random policy method using a new approach called SDN.


2021 ◽  
Author(s):  
B. Srivani ◽  
S. Renu Deepti ◽  
Qualid Unnisa

Software defined networking (SDN) permits community feature program ability intended to facilitate about design along with renovation, as well as permit community directors toward adapt congestion guidelines. Nevertheless, denial of provider (DoS) assailants causes productivity issues upon centralized consolidate aircraft about SDN. Even through shipping layer safety (TLS) be able to assist comfy manage plane, that far analytically extensive and composite design. Within the document, we plan light-weight validate compound, known as Hidden Authentication (HiAuth), toward guard the SDN through battering specifications about redirecting devices to control packets thru effective bitwise functioning. HiAuth be that initially toward incorporate records battering methods for Open Flow toward offer safety in opposition to DoS attacks. HiAuth utilizes IP identification field about IPv4 as well as proceedings recognition area about OpenFlow within two attestation methods. The investigational outcomes display that HiAuth able to efficiently alleviate trespasser DoS assaults as well as supply excessive unnoticeable toward assailants.


Author(s):  
Tsehay Admassu Assegie

In software defined network the network infrastructure layer where the entire network devices, like switches and routers reside is connected with the separate controller layer with the help of standard called OpenFlow. The open flow standard enables different vendor devices like juniper, cisco and Huawei switch to connect to the controller or a software program. The software program controls and manages the network devices. Therefore, software defined network architecture makes the network flexible, cost effective and manageable, enables dynamic provisioning of bandwidth, dynamic scale out and dynamic scale in compared to the traditional network. In this study, the architectures and principles of software defined network is explored by emulating the software defined network employing a mininet.


Author(s):  
Valeriy G. Yakubenko ◽  
Anna L. Chultsova

Identification of water masses in areas with complex water dynamics is a complex task, which is usually solved by the method of expert assessments. In this paper, it is proposed to use a formal procedure based on the application of the method of optimal multiparametric analysis (OMP analysis). The data of field measurements obtained in the 68th cruise of the R/V “Academician Mstislav Keldysh” in the summer of 2017 in the Barents Sea on the distribution of temperature, salinity, oxygen, silicates, nitrogen, and phosphorus concentration are used as a data for research. A comparison of the results with data on the distribution of water masses in literature based on expert assessments (Oziel et al., 2017), allows us to conclude about their close structural similarity. Some differences are related to spatial and temporal shifts of measurements. This indicates the feasibility of using the OMP analysis technique in oceanological studies to obtain quantitative data on the spatial distribution of different water masses.


2015 ◽  
Vol 135 (6) ◽  
pp. 721-722 ◽  
Author(s):  
Wataru Kumagai ◽  
Kenichi Tamura ◽  
Junichi Tsuchiya ◽  
Keiichiro Yasuda

2020 ◽  
Vol 5 (1) ◽  
pp. 414
Author(s):  
Amsar Yunan

Maps or remote sensing can be interpreted as the process of reading using various sensors where data collected remotely can be analyzed to obtain information about the object, area or phenomenon. In this study, the author develops a flood disaster mapping information system applying overlays with scoring between the parameters. The determinant factors to provide flood hazard levels includes rainfall factors in the dasarian unit, land-use factors and land-use arbitrary factors. Of all these parameters, a scoring process will be carried out by assigning weights and values according to their respective classifications, then an overlay process will be performed using ArcGIS software. The author conducted this study in Nagan Raya Regency since this area experiences flooding annually.  Framing a thematic map of flood-prone areas in Nagan Raya Regency was designed using the flood hazard method. Spatial data that has been presented in the form of thematic maps as parameters are land use maps, landform maps, and dasarian rainfall maps (per 10 daily). The design of thematic maps that are prone to flooding is done by overlapping (overlay process). In contrast, the determination of the classification is done by adding scores to each parameter, with low, medium and high hazard levels. Parameter analysis shows the level of flood vulnerability in Nagan Raya Regency of each district, namely Beutong: high 0.21%, medium 13.68%, low 86.12%. Seunagan District: high 51.17%, medium 48.83%, low 0%. Seunagan Timur District: high 10.07%, medium 46.18%, low 43.75%. Kuala Subdistrict: high 29.66%, medium 68.99%, low 1.35%. Darul Makmur District: high 8.57%, medium 63.37%, low 28.06%. From the overall results of the study, it can be concluded that the danger of flooding in Nagan Raya Regency with a level of vulnerability: high 9.92%, moderate 42.65% and low 47.43%.


Sign in / Sign up

Export Citation Format

Share Document