The pH of peatmoss generally ranges from 3.0 to 4.0 and limestone is typically added to raise pH to a suitable range. Compost is also used as a substrate component and typically has a high pH of 6.0 to 8.0. When using compost, lime rates must be reduced or eliminated. The two objectives of this study were to determine the resulting pH of substrates created with varying amounts of limestone and compost and assess the impact of the various amounts of limestone and compost on pH buffering capacity. Compost was created from a 1:1:1 weight ratio of a mixture of green plant material and restaurant food waste:horse manure:wood chips. The first experiment was a factorial design with five compost rates (0%, 10%, 20%, 30%, and 40% by volume), four limestone rates (0, 1.2, 2.4, and 3.6 g·L−1 substrate) with five replications. The experiment was conducted three times, each with a different batch of compost. With 0 lime, initial substrate pH increased from 4.5 to 6.7 as compost rate increased. This trend occurred at all other lime rates, which had pH ranges of 5.2–6.9, 5.6–7.0, and 6.1–7.1 for rates of 1.2, 2.4, and 3.6 g·L−1 substrate, respectively. Substrate pH increased significantly as either compost or lime rates increased. The second experiment was a factorial design with four compost rates by volume (0%, 10%, 20%, and 30%), the same four limestone rates as Expt. 1, and five replications. Each substrate treatment was titrated through incubations with six sulfuric acid rates (0, 0.1, 0.2, 0.4, or 0.7 mol of H+ per gram of dry substrate). Substrates with a similar initial pH had very similar buffering capacities regardless of the compost or limestone rate. These results indicate compost can be used to establish growing substrate pH similar to limestone, and this change will have little to no effect on pH buffering capacity.
Establishing Growing Substrate pH with Compost and Limestone and the Impact on pH Buffering Capacity
