Semiconductor voltage stabilizer

1968 ◽  
Vol 11 (7) ◽  
pp. 991-991 ◽  
Author(s):  
L. N. Tetior
Keyword(s):  
Voltage Stabilizer ◽  
Semiconductor Voltage

Semiconductor voltage stabilizer with an incorporated thermostat

1966 ◽  
Vol 9 (6) ◽  
pp. 853-854
Author(s):  
A. T. Dyuzhin ◽  
V. M. Simonov
Keyword(s):  
Voltage Stabilizer ◽  
Semiconductor Voltage

Semiconductor voltage stabilizer

1977 ◽  
Vol 20 (2) ◽  
pp. 299-299
Author(s):  
L. A. Sarkisova ◽  
V. A. Vil'gel'm
Keyword(s):  
Voltage Stabilizer ◽  
Semiconductor Voltage

BEHAVIORAL MODEL OF A LINEAR VOLTAGE STABILIZER IN THE SPICE LANGUAGE

2019 ◽  
Author(s):  
Aleksey Malahanov
Keyword(s):  
Experimental Data ◽  
Behavioral Model ◽  
Voltage Stabilizer ◽  
Static Mode ◽  
Technical Description ◽  
Simulation Results ◽  
Chip Manufacturer ◽  
Linear Voltage

A variant of the implementation of the behavioral model of a linear voltage stabilizer in the Spice language is presented. The results of modeling in static mode are presented. The simulation results are compared with experimental data and technical description of the chip manufacturer.

Semiconductor Voltage Regulators-Stabilizers for Distribution Networks

2021 ◽  
Author(s):  
M. G. Astashev ◽  
K. A. Lunin ◽  
D. I. Panfilov ◽  
M. I. Petrov ◽  
P. A. Rashitov
Keyword(s):  
Distribution Networks ◽  
Voltage Regulators ◽  
Semiconductor Voltage

scholarly journals Effect of Acetylated SEBS/PP for Potential HVDC Cable Insulation

Materials ◽  
2021 ◽  
Vol 14 (7) ◽  
pp. 1596
Author(s):  
Peng Zhang ◽  
Yongqi Zhang ◽  
Xuan Wang ◽  
Jiaming Yang ◽  
Wenbin Han
Keyword(s):  
Mechanical Properties ◽  
Field Strength ◽  
Thermoplastic Elastomer ◽  
High Energy ◽  
Thermoplastic Elastomers ◽  
Electrical Strength ◽  
Voltage Stabilizer ◽  
Breakdown Field ◽  
Cable Insulation ◽  
Breakdown Field Strength

Blending thermoplastic elastomers into polypropylene (PP) can make it have great potential for high-voltage direct current (HVDC) cable insulation by improving its toughness. However, when a large amount of thermoplastic elastomer is blended, the electrical strength of PP will be decreased consequently, which cannot meet the electrical requirements of HVDC cables. To solve this problem, in this paper, the inherent structure of thermoplastic elastomer SEBS was used to construct acetophenone structural units on its benzene ring through Friedel–Crafts acylation, making it a voltage stabilizer that can enhance the electrical strength of the polymer. The DC electrical insulation properties and mechanical properties of acetylated SEBS (Ac-SEBS)/PP were investigated in this paper. The results showed that by doping 30% Ac-SEBS into PP, the acetophenone structural unit on Ac-SEBS remarkably increased the DC breakdown field strength of SEBS/PP by absorbing high-energy electrons. When the degree of acetylation reached 4.6%, the DC breakdown field strength of Ac-SEBS/ PP increased by 22.4% and was a little higher than that of PP. Ac-SEBS, with high electron affinity, is also able to reduce carrier mobility through electron capture, resulting in lower conductivity currents in SEBS/PP and suppressing space charge accumulation to a certain extent, which enhances the insulation properties. Besides, the highly flexible Ac-SEBS can maintain the toughening effect of SEBS, resulting in a remarkable increase in the tensile strength and elongation at the break of PP. Therefore, Ac-SEBS/PP blends possess excellent insulation properties and mechanical properties simultaneously, which are promising as insulation materials for HVDC cables.

Analysis of asymmetrical fault on the system compensated by static voltage stabilizer

1979 ◽  
Vol 99 (3) ◽  
pp. 45-54
Author(s):  
Ikuo Kurihara ◽  
Nobuyoshi Hirai ◽  
Yasuji Sekine
Keyword(s):  
Voltage Stabilizer

Microprocessor controlled voltage stabilizer

2002 ◽  
Author(s):  
A.E. Lashine ◽  
A.S. Zein El Din
Keyword(s):  
Voltage Stabilizer

scholarly journals Implementation of Buck-Boost Converter as Low Voltage Stabilizer at 15 V

2019 ◽  
Vol 9 (4) ◽  
pp. 2230
Author(s):  
Suwarno Suwarno ◽  
Tole Sutikno
Keyword(s):  
Power Electronics ◽  
Wind Power ◽  
Output Voltage ◽  
Low Voltage ◽  
Input Voltage ◽  
Boost Converter ◽  
Voltage Stabilizer ◽  
Voltage Regulator ◽  
Output Current ◽  
Converter Design

<p>This paper presents the implementation of the buck-boost converter design which is a power electronics applications that can stabilize voltage, even though the input voltage changes. Regulator to stabilize the voltage using PWM pulse that triger pin 2 on XL6009. In this design of buck-boost converter is implemented using the XL6009, LM7815 and TIP2955. LM7815 as output voltage regulator at 15V with 1A output current, while TIP2955 is able to overcome output current up to 5A. When the LM7815 and TIP2955 are connected in parallel, the converter can increase the output current to 6A.. Testing is done using varied voltage sources that can be set. The results obtained from this design can be applied to PV (Photovoltaic) and WP (Wind Power), with changes in input voltage between 3-21V dc can produce output voltage 15V.</p>

scholarly journals UNIVERSAL THREE-PHASE FERRORESONANCE STABILIZERS

2016 ◽  
Vol 19 (1) ◽  
Author(s):  
GEORGI GEORGIEV ◽  
NADEZHDA EVSTATIEVA
Keyword(s):  
Comparative Analysis ◽  
Experimental Studies ◽  
Voltage Stabilizer ◽  
Satisfactory Accuracy ◽  
Three Phase ◽  
Theoretical Results

A comparative analysis has been carried out on two options of three-phase parametric current sources (inductive-capacitive stabilizers). Their capacities to operate in voltage stabilizer mode have been studied. Such capacities were proven and their conditions were defined. Theoretical results were experimentally checked and confirmed with satisfactory accuracy. Based on theoretical and experimental studies it was proven that the considered systems can operate in both modes – as current and voltage stabilizers.

Sign in / Sign up

Export Citation Format

Share Document