Mechanism of failure of heat exchangers in cement furnaces

1977 ◽  
Vol 19 (3) ◽  
pp. 222-224
Author(s):  
M. A. Tylkin ◽  
B. N. Bogomolov ◽  
A. M. Sharkova
Keyword(s):  
Heat Exchangers ◽  
Mechanism Of Failure

Application of Scanning Electron Microscopy to Medical Research

1969 ◽  
Vol 27 ◽  
pp. 12-13
Author(s):  
J. D. Hutchison
Keyword(s):  
Electron Microscopy ◽  
Electron Microscope ◽  
Medical Research ◽  
Prosthetic Heart Valve ◽  
School Of Medicine ◽  
Transmission Electron ◽  
Definition Of ◽  
Mechanism Of Failure ◽  
The Brain ◽  
Scanning Electron

When the transmission electron microscope was commercially introduced a few years ago, it was heralded as one of the most significant aids to medical research of the century. It continues to occupy that niche; however, the scanning electron microscope is gaining rapidly in relative importance as it fills the gap between conventional optical microscopy and transmission electron microscopy.IBM Boulder is conducting three major programs in cooperation with the Colorado School of Medicine. These are the study of the mechanism of failure of the prosthetic heart valve, the study of the ultrastructure of lung tissue, and the definition of the function of the cilia of the ventricular ependyma of the brain.

Determination of creep mechanisms in various silicon carbides via TEM

1986 ◽  
Vol 44 ◽  
pp. 484-487
Author(s):  
C. H. Carter ◽  
J. E. Lane ◽  
J. Bentley ◽  
R. F. Davis
Keyword(s):  
Heat Exchangers ◽  
Sintered Material ◽  
Polycrystalline Material ◽  
Chemical Vapor ◽  
Graphite Substrate ◽  
Second Phase ◽  
Reaction Bonding ◽  
Creep Mechanisms ◽  
Porous Sic

Silicon carbide (SiC) is the generic name for a material which is produced and fabricated by a number of processing routes. One of the three SiC materials investigated at NCSU is Norton Company's NC-430, which is produced by reaction-bonding of Si vapor with a porous SiC host which also contains free C. The Si combines with the free C to form additional SiC and a second phase of free Si. Chemical vapor deposition (CVD) of CH3SiCI3 onto a graphite substrate was employed to produce the second SiC investigated. This process yielded a theoretically dense polycrystalline material with highly oriented grains. The third SiC was a pressureless sintered material (SOHIO Hexoloy) which contains B and excess C as sintering additives. These materials are candidates for applications such as components for gas turbine, adiabatic diesel and sterling engines, recouperators and heat exchangers.

Postmortem and in situ TEM methods to study the mechanism of failure in controlled-morphology high-impact polystrene resin

1996 ◽  
Vol 54 ◽  
pp. 178-179
Author(s):  
R. C. Cieslinski ◽  
M. T. Dineen ◽  
J. L. Hahnfeld
Keyword(s):  
Poisson Ratio ◽  
Acrylonitrile Butadiene Styrene ◽  
High Impact ◽  
In Situ Tem ◽  
Styrene Copolymers ◽  
Controlled Morphology ◽  
Point Bend ◽  
Mechanism Of Failure ◽  
Impact Energies

Advanced Styrenic resins are being developed throughout the industry to bridge the properties gap between traditional HIPS (High Impact Polystyrene) and ABS (Acrylonitrile-Butadiene-Styrene copolymers) resins. These new resins have an unprecedented balance of high gloss and high impact energies. Dow Chemical's contribution to this area is based on a unique combination of rubber morphologies including labyrinth, onion skin, and core-shell rubber particles. This new resin, referred as a controlled morphology resin (CMR), was investigated to determine the toughening mechanism of this unique rubber morphology. This poster will summarize the initial studies of these resins using the double-notch four-point bend test of Su and Yee, tensile stage electron microscopy, and Poisson Ratio analysis of the fracture mechanism.

Borehole Heat Exchangers in aquifers: simulation of the grout material impact

2016 ◽  
Vol 41 ◽  
pp. 268-271
Author(s):  
Luca Alberti ◽  
Adriana Angelotti ◽  
Matteo Antelmi ◽  
Ivana La Licata
Keyword(s):  
Heat Exchangers ◽  
Borehole Heat Exchangers

Dramatic efficiency gains through improved heat exchangers: the case of cassava flash drying in Nigeria

Food Chain ◽  
2015 ◽  
Vol 5 (1-2) ◽  
pp. 91-104 ◽  
Author(s):  
Andrew Marchant ◽  
Andrew Graffham ◽  
Lateef Sanni ◽  
Idowu Adeoya
Keyword(s):  
Heat Exchangers ◽  
Efficiency Gains ◽  
Flash Drying
Sign in / Sign up

Export Citation Format

Share Document