scholarly journals Fast, inexpensive, and reliable HPLC method to determine monomer fractions in poly(3-hydroxybutyrate-co-3-hydroxyvalerate)

Author(s):  
Stefanie Duvigneau ◽  
Alexander Kettner ◽  
Lisa Carius ◽  
Carola Griehl ◽  
Rolf Findeisen ◽  
...  

AbstractThe determination of the monomer fractions in polyhydroxyalkanoates is of great importance for research on microbial-produced plastic material. The development of new process designs, the validation of mathematical models, and intelligent control strategies for production depend enormously on the correctness of the analyzed monomer fractions. Most of the available detection methods focus on the determination of the monomer fractions of the homopolymer poly(3-hydroxybutyrate). Only a few can analyze the monomer content in copolymers such as poly(3-hydroxybutyrate-co-3-hydroxyvalerate), which usually require expensive measuring devices, a high preparation time or the use of environmentally harmful halogenated solvents such as chloroform or dichloromethane. This work presents a fast, simple, and inexpensive method for the analysis of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) with high-performance liquid chromatography. Samples from a bioreactor experiment for the production of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) with Cupriavidus necator H16 were examined regarding their monomer content using the new method and gas chromatography analysis, one of the most frequently used methods in literature. The results from our new method were validated using gas chromatography measurements and show excellent agreement.Key points∙ The presented HPLC method is an inexpensive, fast and environmentally friendly alternative to existing methods for quantification of monomeric composition of PHBV.∙ Validation with state of the art GC measurement exhibits excellent agreement over a broad range of PHBV monomer fractions.

2021 ◽  
Vol 16 ◽  
pp. 1-9
Author(s):  
Muhammad Abdurrahman Munir ◽  
Muhammad Mukram Mohamed Mackeen ◽  
Lee Yook Heng ◽  
Khairiah Haji Badri

Histamine is a heterocyclic amine shaped by decarboxylation of the histidine. It is a compound that lack chromophore and involatile. However, the detection of histamine is imperative due to the characteristic of histamine has given several disadvantages in food industry. This paper describes methods for histamine detection by employing high performance liquid chromatography and gas chromatography. The derivatization techniques required for both methods in order to increase the sensitivity of chromatography analysis. Two derivatizing agents were applied in this study such as 9-flourenilmethyl chloroformate (FMOC – Cl) for HPLC analysis whereas for GC analysis a N,O-bis (trimethylsilyl)acetamide (BSA) was used. Method validation was in accordance to Commission Decision 657/2002/CE. The validation of specificity, linearity, precision, accuracy, detection limit and quantitation limit results indicate that the methods were acceptable. The linear range for both methods were at 0.16 – 5.00 µg∙mL-1. The determination of histamine using GC showed the superiority of this instrument compared to HPLC. Method applicability was also checked on real sample namely mackerel in order to acquire a satisfactory recovery for both methods.


2020 ◽  
Vol 20 (13) ◽  
pp. 1053-1059
Author(s):  
Mahmoud M. Sebaiy ◽  
Noha I. Ziedan

Background: Allergic diseases are considered as the major burden on public health with increased prevalence globally. Histamine H1-receptor antagonists are the foremost commonly used drugs in the treatment of allergic disorders. The target drug in this study, loratadine, belongs to this class of drugs and its biometabolite desloratadine which is also a non-sedating H1 receptor antagonist with anti-histaminic activity being 2.5 to 4 times greater than loratadine. This study aimed to develop and validate a novel isocratic Reversed-phase High-Performance Liquid Chromatography (RP-HPLC) method for rapid and simultaneous separation and determination of loratadine and its metabolite, desloratadine in human plasma. Methods: The drug extraction method from plasma was based on protein precipitation technique. The separation was carried out on a Thermo Scientific BDS Hypersil C18 column (5μm, 250 x 4.60 mm) in a mobile phase of MeOH: 0.025M KH2PO4 adjusted to pH 3.50 using orthophosphoric acid (85: 15, v/v) at an ambient temperature. The flow rate was maintained at 1 mL/min and maximum absorption was measured using the PDA detector at 248 nm. Results: The retention times of loratadine and desloratadine in plasma samples were recorded to be 4.10 and 5.08 minutes, respectively, indicating a short analysis time. Limits of detection were found to be 1.80 and 1.97 ng/mL for loratadine and desloratadine, respectively, showing a high degree of sensitivity of the method. The method was then validated according to FDA guidelines for the determination of the two analytes in human plasma. Conclusion: The results obtained indicate that the proposed method is rapid, sensitive in the nanogram range, accurate, selective, robust and reproducible compared to other reported methods.


2020 ◽  
Vol 23 (10) ◽  
pp. 1010-1022
Author(s):  
Emrah Dural

Aim and scope: Due to the serious toxicological risks and their widespread use, quantitative determination of phthalates in cosmetic products have importance for public health. The aim of this study was to develop a validated simple, rapid and reliable high-performance liquid chromatography (HPLC) method for the determination of phthalates which are; dimethyl phthalate (DMP), diethyl phthalate (DEP), benzyl butyl phthalate (BBP), di-n-butyl phthalate (DBP), di(2- ethylhexyl) phthalate (DEHP), in cosmetic products and to investigate these phthalate (PHT) levels in 48 cosmetic products marketing in Sivas, Turkey. Materials and Methods: Separation was achieved by a reverse-phase ACE-5 C18 column (4.6 x 250 mm, 5.0 μm). As the mobile phase, 5 mM KH2PO4 and acetonitrile were used gradiently at 1.5 ml min-1. All PHT esters were detected at 230 nm and the run time was taking 21 minutes. Results: This method showed the high sensitivity value the limit of quantification (LOQ) values for which are below 0.64 μg mL-1 of all phthalates. Method linearity was ≥0.999 (r2). Accuracy and precision values of all phthalates were calculated between (-6.5) and 6.6 (RE%) and ≤6.2 (RSD%), respectively. Average recovery was between 94.8% and 99.6%. Forty-eight samples used for both babies and adults were successfully analyzed by the developed method. Results have shown that, DMP (340.7 μg mL-1 ±323.7), DEP (1852.1 μg mL-1 ± 2192.0), and DBP (691.3 μg mL-1 ± 1378.5) were used highly in nail polish, fragrance and cream products, respectively. Conclusion: Phthalate esters, which are mostly detected in the content of fragrance, cream and nail polish products and our research in general, are DEP (1852.1 μg mL-1 ± 2192.0), DBP (691.3 μg mL-1 ± 1378.5) and DMP (340.7 μg mL-1 ±323.7), respectively. Phthalates were found in the content of all 48 cosmetic products examined, and the most detected phthalates in general average were DEP (581.7 μg mL-1 + 1405.2) with a rate of 79.2%. The unexpectedly high phthalate content in the examined cosmetic products revealed a great risk of these products on human health. The developed method is a simple, sensitive, reliable and economical alternative for the determination of phthalates in the content of cosmetic products, it can be used to identify phthalate esters in different products after some modifications.


2020 ◽  
Vol 16 ◽  
Author(s):  
Yun-Yan Xia ◽  
Qiao-Gen Zou ◽  
Yu-Fei Yang ◽  
Qian Sun ◽  
Cheng-Qun Han

Background: High-performance liquid chromatography (HPLC) method has been used to detect related impurities of perampanel. However, the detection of impurities is incomplete, and the limits of quantification and detection are high. A sensitive, reliable method is in badly to be developed and applied for impurity detection of perampanel bulk drug. Objective: Methodologies utilising HPLC and gas chromatography (GC) were established and validated for quantitative determination of perampanel and its related impurities (a total of 10 impurities including 2 genotoxic impurities). Methods: The separation was achieved on a Dikma Diamonsil C18 column (250 mm × 4.6 mm, 5 μm) with the mobile phase of 0.01 mol/L potassium dihydrogen phosphate solution (A) and acetonitrile (B) in gradient elution mode. The compound 2-bromopropane was determined on an Agilent DB-624 column (0.32 mm × 30 m, 1.8 μm) by electron capture detector (μ-ECD) with split injection ratio of 1:5 and proper gradient temperature program. Result: Both HPLC and GC methods were established and validated to be sensitive, accurate and robust according to International Council for Harmonization (ICH) guidelines. The methods developed were linear in the selected concentration range (R 2≥0.9944). The average recovery of all impurities was between 92.6% and 103.3%. The possible production mechanism of impurities during the synthesis and degradation processes of perampanel bulk drug was also discussed. Five impurities were analyzed by liquid chromatography–mass spectrometry (LC-MS). Moreover, two of them were simultaneously characterized by LC-MS, IR and NMR. Conclusion: The HPLC and GC methods were developed and optimized, which could be applied for quantitative detection of the impurities, and further stability study of perampanel.


2021 ◽  
Vol 13 (6) ◽  
pp. 796-800
Author(s):  
Ting Zhao ◽  
Zhanbo Hu ◽  
Xin-Sheng Chai ◽  
Yukai Zheng ◽  
Binxin Xu ◽  
...  

This paper reports a new method for the determination of sludge water content by a multiple headspace extraction gas chromatographic (MHE-GC) method. It is based on the water vapor signals in the sample vial from the first five extractions.


Sign in / Sign up

Export Citation Format

Share Document