Effect of alkali treatment and coupling agent on thermal and mechanical properties of Opuntia ficus-indica cladodes fibers reinforced HDPE composites

2021 ◽  
Author(s):  
Anass Ait Benhamou ◽  
Abdelghani Boussetta ◽  
Mehdi Nadifiyine ◽  
Amine Moubarik
Keyword(s):  
Mechanical Properties ◽  
Coupling Agent ◽  
Alkali Treatment ◽  
Thermal And Mechanical Properties ◽  
Opuntia Ficus Indica

Effect of SEBS-MA and MAPP as coupling agent on the thermal and mechanical properties in highly filled composites of oil palm fiber/PP

2018 ◽  
Vol 26 (8) ◽  
pp. 699-709 ◽  
Author(s):  
José Alexandre Simão ◽  
José Manoel Marconcini ◽  
Luiz Henrique Capparelli Mattoso ◽  
Anand Ramesh Sanadi
Keyword(s):  
Mechanical Properties ◽  
Oil Palm ◽  
Coupling Agent ◽  
Thermal And Mechanical Properties ◽  
Palm Fiber

Properties of PP Wood-Plastic Composites with Biocompatibility Additives

2019 ◽  
Vol 944 ◽  
pp. 509-514 ◽  
Author(s):  
Shan Shan Liu ◽  
He Yi Ge ◽  
Yu Zou ◽  
Juan Chen
Keyword(s):  
Mechanical Properties ◽  
Coupling Agent ◽  
Treatment Process ◽  
Alkali Treatment ◽  
Alkaline Treatment ◽  
Morphological Observation ◽  
Corn Stalk ◽  
Plastic Composites ◽  
The Matrix ◽  
Interfacial Compatibility

Maleic anhydride grafted polypropylene compatibilizer (MAPP) and chitosan (CS) were mixed and used as a compound coupling agent to modify the PP matrix. 5 wt% NaOH and 10 wt% NaOH aqueous solution were used to treat corn stalk fiber (CSF), respectively. The effect of the complex coupling agent and the alkali treatment on the mechanical properties of CSF/PP composite was investigated. Morphological observation of the fracture surfaces was accepted to confirm CSF dispersion and wetting with the help of SEM. The results of the water absorption further demonstrated the binding of the interface between the CSF and the PP matrix. The wetting of the CSF in the PP was improved with the addition of the complex compatibilizer (5% MAPP + 5% CS). The formation of chemical bonding between the fiber and the matrix resulted in enhancing the interfacial compatibility between them. Compared with the pure PP, the flexural strength of 15-UT-5MAPPCS (63.14 MPa) and 15-UT-5MAPPCS (69.35 MPa) increased by 22.5% and 34.5%, respectively. The complex compatibilizer can replace alkaline treatment process to improve the mechanical properties of the composite.

Characterization of polypropylene composites reinforced with flax fibers treated by mechanical and alkali methods

2011 ◽  
Vol 18 (1-2) ◽  
pp. 79-85 ◽  
Author(s):  
Wei Hu ◽  
Minh-Tan Ton-That ◽  
Johanne Denault ◽  
Christian Belanger
Keyword(s):  
Mechanical Properties ◽  
Natural Fiber ◽  
Alkali Treatment ◽  
Alkaline Treatment ◽  
Thermal And Mechanical Properties ◽  
Polypropylene Composites ◽  
Flax Fibers ◽  
Fiber Separation ◽  
As Stress

AbstractFlax is a type of natural fiber widely used as reinforcing materials for polymer composites. The commercially available flax fibers in Canada consist of a significant amount of shive and other impurities, which could act as stress concentration regions to negatively affect the mechanical property of composites. In this study, the shive was manually removed from the commercial flax fibers by screening and combing to obtain different shive contents from 0 to 30 wt%. By contrast, the obtained flax fibers were further treated with alkaline solution. The fibers obtained from mechanical and alkali treatment were compared on their thermal and mechanical properties. As expected, it was found that the thermal stability and mechanical properties of the flax reinforced polypropylene composites increased significantly with the removal of the shive content. However, the alkali treatment on flax fiber did not further improve the composites properties. The possible reason was that the proper mechanical treatment (screening and combing) prior to alkaline treatment effectively loosened the fiber bundles for better single fiber separation in matrix and significantly removed the impurities, thus the effect of alkaline treatment did not become obvious.

Effects of Different Pretreatments of Wood Fiber on Mechanical Properties of Biodegradable Composite

2010 ◽  
Vol 150-151 ◽  
pp. 1438-1443
Author(s):  
Yi Qiang Wu ◽  
Zhi Yong Qin ◽  
Yan Qing ◽  
Xin Gong Li
Keyword(s):  
Mechanical Properties ◽  
Stearic Acid ◽  
Polylactic Acid ◽  
Coupling Agent ◽  
Composite System ◽  
Alkali Treatment ◽  
Wood Fiber ◽  
Biodegradable Composite ◽  
The Impact ◽  
Agent Treatment

Biodegradable composites of polylactic acid reinforced with wood fiber were fabricated by using twin screw extruder followed by the injection molding machine. The effects of different pretreatments of wood on mechanical properties of the biodegradable composite were discussed. The nature of composites were also examined through scanning electron microscope and Infrared Spectrum Analysis, the results reveal that both acid and stearic acid could be used as effective surface modifier for wood fiber/polylactic acid system, the composite system by adding Benzoic acid, the tensile strength has improved greatly, and about stearic acid composite system, the impact strength has improved significantly; After alkali treatment, coupling agent treatment and combination of alkali treatment and coupling agent treatment, and the use of alkali treatment and the coupling agent treatment is the best, follow by alkali treatment.

Lignin as coupling agent in EPDM rubber: thermal and mechanical properties

2015 ◽  
Vol 72 (9) ◽  
pp. 2389-2398 ◽  
Author(s):  
Ge Xu ◽  
Guangyu Yan ◽  
Jing Zhang
Keyword(s):  
Mechanical Properties ◽  
Coupling Agent ◽  
Thermal And Mechanical Properties ◽  
Epdm Rubber

scholarly journals Quantitively Characterizing the Chemical Composition of Tailored Bagasse Fiber and Its Effect on the Thermal and Mechanical Properties of Polylactic Acid-Based Composites

Polymers ◽  
2019 ◽  
Vol 11 (10) ◽  
pp. 1567 ◽  
Author(s):  
Haoqun Hong ◽  
Ruijing Xiao ◽  
Quannan Guo ◽  
Hao Liu ◽  
Haiyan Zhang
Keyword(s):  
Mechanical Properties ◽  
Coupling Agent ◽  
Silane Coupling Agent ◽  
Natural Fiber ◽  
Alkali Treatment ◽  
Natural Fibers ◽  
Fiber Reinforced Polymer ◽  
Fiber Reinforced ◽  
Reinforced Polymer ◽  
Silane Coupling

Natural fiber reinforced polymer-based composites have been growing into a type of green composites. The properties of natural fiber reinforced polymer-based composites are closely related to the structure of natural fibers. Bagasse fiber (BF) is one of the most used natural fibers for preparing natural fiber reinforced polymer-based composites. However, few examples of previous research touch on the quantitatively characterization of structure of BF and its effect on the properties of BF reinforced polymer-based composites. In this work, four kinds of BF including untreated BF (UBF), alkali treated BF (ABF), BF modified by silane coupling agent (SBF), and BF modified combining alkali treatment with silane coupling agent (ASBF) were prepared and melting blended with polylactic acid (PLA) to prepare PLA/BF composites. Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), thermogravimetry (TGA) and mechanical properties testing were used to characterize and analyze the structure and properties of modified BF and its reinforced PLA-based composites. Results showed that the used methods changed the structure of BF and their bonding modes. The surface energies of UBF, ABF, SBF, and ASBF were 19.8 mJ/m2, 34.7 mJ/m2, 12.3 mJ/m2, and 21.6 mJ/m2, respectively. The O/C ratios of UBF, ABF, SBF and, ASBF are 0.48, 0.53, 0.47, and 0.51. Due to the synergistic effect of alkali treatment and silane coupling agent modification on the surface chemical properties, the content of silicon elements on the surface of ASBF (4.15%) was higher than that of ASBF (2.38%). However, due to the destroying of alkali treatment on the microstructure of BF, the alkali treatment had no prominently synergetic effect with coupling agent modification on the mechanical properties of PLA/BF composites. Alkali treatment removed the small molecular compounds from BF, decreased its thermal stability, and increased the crystalline region and crystallinity of cellulose. Meanwhile, alkali treatment made BF fibrillated and increased its contactable active area with the coupling agents, but destructed the nature structure of BF. The silane coupling agent played a more important role than alkali treatment did in improving the interfacial compatibility of PLA/BF composites.

scholarly journals Investigation of the Effects of Titanate as Coupling Agent and Some Inorganic Nanoparticles as Fillers on Mechanical Properties and Morphology of Soft PVC

2011 ◽  
Vol 2011 ◽  
pp. 1-9 ◽  
Author(s):  
Morteza Hajian ◽  
Gholam Ali Koohmareh ◽  
Afsaneh Mostaghasi
Keyword(s):  
Mechanical Properties ◽  
Coupling Agent ◽  
Mechanical Tests ◽  
Inorganic Nanoparticles ◽  
Nano Particles ◽  
Thermal And Mechanical Properties ◽  
Scanning Calorimetry ◽  
Nanoscale Particles ◽  
The Impact ◽  
Thermal Stability Of

The effects of titanate as a coupling agent and some particulate nanoscale particles such as TiO2, CaCO3, and ZnO on thermal and mechanical properties of emulsion polyvinylchloride (E-PVC) were investigated by thermogravimetric analysis (TGA), and mechanical tests. In this research, it was found that, in the presence of nanoparticles of CaCO3, TiO2, and ZnO, the peak temperature of dehydrochlorination of E-PVC was shifted to higher temperatures, and the rate of mass loss was decreased. Also results of differential scanning calorimetry showed that the addition of nanoparticle of CaCO3, TiO2, and ZnO led to an increase in glass transition temperature. The impact strength, elastic modulus and toughness of the samples were enhanced after addition of 0–10 part of filer in hundred parts of resin (phr) nano-CaCO3, nano-TiO2, and nano-ZnO due to improvement of compatibility of the polymer and the nano-particles. Also UV and thermal stability of the samples were enhanced by means of the nanoparticles. It was found that, in the presence of titanate as coupling agent, content of additives that could be used in the composite of PVC shifts to higher amounts.

Sign in / Sign up

Export Citation Format

Share Document