scholarly journals Enhanced adsorption capacity of porous titanium dioxide nanoparticles synthetized in alkaline sol

2020 ◽  
Vol 126 (12) ◽  
Author(s):  
Luigi Scrimieri ◽  
Luciano Velardi ◽  
Antonio Serra ◽  
Daniela Manno ◽  
Francesca Ferrari ◽  
...  
Keyword(s):  
Titanium Dioxide ◽  
Adsorption Capacity ◽  
Industrial Development ◽  
Titanium Dioxide Nanoparticles ◽  
Low Cost ◽  
High Surface ◽  
High Surface Area ◽  
Porous Titanium ◽  
Electron Microscopies ◽  
Enhanced Adsorption

Abstract In recent years, the exploitation of natural resources and industrial development have led to the production of harmful pollutants. Much of these contaminants end up in water resources, reducing the availability of drinking water. Therefore, it is necessary to find remedies to this situation. Solutions could be the adsorption or the degradation through photocatalysis of these compounds. A good candidate for this task is titanium dioxide (TiO2), due to its non-toxicity, stability and low cost. In this work, we propose a novel synthesis of TiO2 nanoparticles (NPs), with high adsorption capacity, produced at low temperature in alkaline environment. Adsorption tests were conducted using methylene blue and diclofenac as model pollutants. Moreover, the obtained NPs have been characterized through Raman spectroscopy, Scanning and Transmission electron microscopies and with thermogravimetric analysis. The results showed a porous structure with a high surface area, able to efficiently adsorb large amounts of dye from the aqueous solution. These properties make the obtained TiO2 powders suitable for applications devoted to the adsorption and recovery of harmful compounds. Graphic abstract

Morphology dependent adsorption of methylene blue on trititanate nanoplates and nanotubes prepared by the hydrothermal treatment of TiO2

2016 ◽  
Vol 75 (2) ◽  
pp. 350-357
Author(s):  
Graham Dawson ◽  
Wei Chen ◽  
Luhua Lu ◽  
Kai Dai
Keyword(s):  
Methylene Blue ◽  
Adsorption Capacity ◽  
Surface Area ◽  
Pore Volume ◽  
Hydrothermal Reaction ◽  
Low Cost ◽  
High Surface ◽  
High Surface Area ◽  
High Capacity ◽  
Adsorption Properties

The adsorption properties of two nanomorphologies of trititanate, nanotubes (TiNT) and plates (TiNP), prepared by the hydrothermal reaction of concentrated NaOH with different phases of TiO2, were examined. It was found that the capacity for both morphologies towards methylene blue (MB), an ideal pollutant, was extremely high, with the TiNP having a capacity of 130 mg/g, higher than the TiNT, whose capacity was 120 mg/g at 10 mg/L MB concentration. At capacity, the well-dispersed powders deposit on the floor of the reaction vessel. The two morphologies had very different structural and adsorption properties. TiNT with high surface area and pore volume exhibited exothermic monolayer adsorption of MB. TiNP with low surface area and pore volume yielded a higher adsorption capacity through endothermic multilayer adsorption governed by pore diffusion. TiNP exhibited a higher negative surface charge of −23 mV, compared to −12 mV for TiNT. The adsorption process appears to be an electrostatic interaction, with the cationic dye attracted more strongly to the nanoplates, resulting in a higher adsorption capacity and different adsorption modes. We believe this simple, low cost production of high capacity nanostructured adsorbent material has potential uses in wastewater treatment.

Influence of nanoparticles on the polymer-conditioned dewatering of wastewater sludges

2013 ◽  
Vol 67 (9) ◽  
pp. 2117-2123
Author(s):  
N. J. Boyle ◽  
G. M. Evans
Keyword(s):  
Activated Sludge ◽  
Titanium Dioxide Nanoparticles ◽  
Low Cost ◽  
High Surface ◽  
High Surface Area ◽  
Wastewater Sludge ◽  
Small Scale ◽  
Sludge Dewatering ◽  
Solids Content ◽  
The Impact

The effect of using small-scale, high surface area, nanoparticles to supplement polymer-conditioned wastewater sludge dewatering was investigated. Aerobically digested sludge and waste activated sludge sourced from the Hunter Valley, NSW, Australia, were tested with titanium dioxide nanoparticles. The sludge samples were dosed with the nanoparticles in an attempt to adsorb a component of the charged biopolymer surfactants present naturally in sludge. The sludge was conditioned with a cationic polymer. The dewatering characteristics were assessed by measuring the specific resistance to filtration through a modified time-to-filter testing apparatus. The solids content of the dosed samples was determined by a mass balance and compared to the original solids content in the activated sludge. Test results indicated that nanoparticle addition modified the structure of the sludge and provided benefits in terms of the dewatering rate. The samples dosed with nanoparticles exhibited faster water removal, indicating a more permeable filter cake and hence more permeable sludge. A concentration of 2–4% nanoparticles was required to achieve a noticeable benefit. As a comparison, the sludge samples were also tested with a larger particle size, powdered activated carbon (PAC). It was found that the PAC did provide some minor benefits to sludge dewatering but was outperformed by the nanoparticles. The solids content of the final sludge was increased by a maximum of up to 0.6%. The impact of the order sequence of particles and polymer was also investigated. It was found that nanoparticles added before polymer addition provided the best dewatering performance. This outcome was consistent with current theories and previous research through the literature. An economic analysis was undertaken to confirm the viability of the technology for implementation at a full-scale plant. It was found that, currently, this technology is unlikely to be favourable unless the nanoparticles can be sourced for a low cost.

scholarly journals Photocatalytic Degradation of Organics by Using Nanocrystalline Titania

2017 ◽  
Vol 2017 ◽  
pp. 1-5 ◽  
Author(s):  
Sana Ahmad ◽  
Anam Nazir ◽  
Tousif Hussain
Keyword(s):  
Titanium Dioxide ◽  
Catalytic Activity ◽  
Titanium Dioxide Nanoparticles ◽  
High Surface ◽  
Sol Gel ◽  
High Surface Area ◽  
Crystalline Form ◽  
Titanium Butoxide ◽  
Fine Spray ◽  
Ft Ir

Titanium dioxide nanoparticles were prepared by a modified sol-gel route. Titanium butoxide was used as precursor and nebulizer was used for a fine spray of particles. The prepared powders were characterized by FT-IR, SEM, XRD, and TGA-DTA methods. The results indicated that nanoparticles with small size and high surface area were synthesized. XRD result indicated that TiO2 nanoparticles were obtained in pure anatase crystalline form with a crystallite size of 40 nm. The catalytic activity of as-synthesized nanoparticles was tested for the degradation of formic acid and toluene.

scholarly journals The toxicology properties of modified hydrothermal nanotitania extraction

2021 ◽  
Author(s):  
Ahmad Harun ◽  
Nor Farid Mohd Noor ◽  
Ramizu Shaari ◽  
Lio Ying ◽  
Mohamad Yusoff ◽  
...  
Keyword(s):  
Titanium Dioxide ◽  
Low Cost ◽  
High Surface ◽  
High Surface Area ◽  
Health And Safety ◽  
L929 Cell ◽  
Cytotoxicity Activity ◽  
Nano Titanium Dioxide ◽  
L929 Mouse

IntroductionThe nanoparticle has become a part of world industry. This substance has been proven as potentially beneficial for its usage as a catalyst and semi-conductor due to its high surface area and the effects of the quantum size effect. It exhibits potential characteristics and would be applied in a wider scope of usage compared to bulk particles because the smaller the size of the particles, the more room for the extent of their usage. Nano titanium dioxide application as semi-conductors together with a catalyst is highly attributed to its high photochemical stability and ability to be produced at a low-cost. The consequence of this – exposure of nano titanium dioxide particles to humans – raises concerns regarding health and safety. Therefore, this research action works designed to offer a thorough analysis of toxicology impacts produced by our own synthesis modified hydrothermal in vitro experiments.Material and methodsOur nanotitania extraction with 0.05% silver was tested for its toxicity against L929 mouse cells. The cytotoxicity effect of nanotitania extract was evaluated by MTT assay. Cell viability (% CV) was calculated using a formula.ResultsThere are non-cytotoxicity activity of 0.05% nanotitania at concentrations 1.5, 3.1, 6.3, 12.5, and 25 mg/ml on L929 cell lines except at concentration 50 and 100 mg/ml. The result was related to the optical density reading.ConclusionsThere is no cytotoxic effect of nanotitania extraction with 0.05% silver in the growth inhibition test with L929 mouse with the exception of the 100 mg/ml extract.

scholarly journals Enhanced adsorption capacity of ultralong hydrogen titanate nanobelts for antibiotics

2017 ◽  
Vol 5 (9) ◽  
pp. 4352-4358 ◽  
Author(s):  
Wenyao Li ◽  
Jingru Wang ◽  
Guanjie He ◽  
Li Yu ◽  
Nuruzzaman Noor ◽  
...  
Keyword(s):  
Adsorption Capacity ◽  
Surface Area ◽  
High Surface ◽  
High Surface Area ◽  
Hollow Structure ◽  
Contaminated Water ◽  
Hydrogen Titanate ◽  
Enhanced Adsorption

Ultralong hydrogen titanate nanobelts with a hollow structure and high surface area were synthesized to serve as promising materials for effective adsorption of antibiotics from contaminated water.

scholarly journals Synthesis of catalysts with fine platinum particles supported by high-surface-area activated carbons and optimization of their catalytic activities for polymer electrolyte fuel cells

RSC Advances ◽  
2021 ◽  
Vol 11 (33) ◽  
pp. 20601-20611
Author(s):  
Md. Mijanur Rahman ◽  
Kenta Inaba ◽  
Garavdorj Batnyagt ◽  
Masato Saikawa ◽  
Yoshiki Kato ◽  
...  
Keyword(s):  
Fuel Cells ◽  
Polymer Electrolyte ◽  
High Performance ◽  
Activated Carbons ◽  
Low Cost ◽  
High Surface ◽  
High Surface Area ◽  
Polymer Electrolyte Fuel Cells ◽  
Supported Platinum ◽  
Platinum Particles

Herein, we demonstrated that carbon-supported platinum (Pt/C) is a low-cost and high-performance electrocatalyst for polymer electrolyte fuel cells (PEFCs).

scholarly journals Effects of Annealing Temperature on the Oxygen Evolution Reaction Activity of Copper–Cobalt Oxide Nanosheets

Nanomaterials ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 657
Author(s):  
Geul Han Kim ◽  
Yoo Sei Park ◽  
Juchan Yang ◽  
Myeong Je Jang ◽  
Jaehoon Jeong ◽  
...  
Keyword(s):  
High Activity ◽  
Cobalt Oxide ◽  
Oxygen Evolution ◽  
Oxygen Evolution Reaction ◽  
Low Cost ◽  
High Surface ◽  
High Surface Area ◽  
Cobalt Hydroxide ◽  
Ni Foam ◽  
Electron Conduction

Developing high performance, highly stable, and low-cost electrodes for the oxygen evolution reaction (OER) is challenging in water electrolysis technology. However, Ir- and Ru-based OER catalysts with high OER efficiency are difficult to commercialize as precious metal-based catalysts. Therefore, the study of OER catalysts, which are replaced by non-precious metals and have high activity and stability, are necessary. In this study, a copper–cobalt oxide nanosheet (CCO) electrode was synthesized by the electrodeposition of copper–cobalt hydroxide (CCOH) on Ni foam followed by annealing. The CCOH was annealed at various temperatures, and the structure changed to that of CCO at temperatures above 250 °C. In addition, it was observed that the nanosheets agglomerated when annealed at 300 °C. The CCO electrode annealed at 250 °C had a high surface area and efficient electron conduction pathways as a result of the direct growth on the Ni foam. Thus, the prepared CCO electrode exhibited enhanced OER activity (1.6 V at 261 mA/cm2) compared to those of CCOH (1.6 V at 144 mA/cm2), Co3O4 (1.6 V at 39 mA/cm2), and commercial IrO2 (1.6 V at 14 mA/cm2) electrodes. The optimized catalyst also showed high activity and stability under high pH conditions, demonstrating its potential as a low cost, highly efficient OER electrode material.

scholarly journals Effective Poly (Cyclotriphosphazene-Co-4,4′-Sulfonyldiphenol)@rGO Sheets for Tetracycline Adsorption: Fabrication, Characterization, Adsorption Kinetics and Thermodynamics

Nanomaterials ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 1540
Author(s):  
Muhammad Ahmad ◽  
Tehseen Nawaz ◽  
Mohammad Mujahid Alam ◽  
Yasir Abbas ◽  
Shafqat Ali ◽  
...  
Keyword(s):  
Adsorption Capacity ◽  
Surface Area ◽  
High Surface ◽  
High Surface Area ◽  
High Adsorption ◽  
Clean Environment ◽  
Equilibrium Data ◽  
Langmuir Isotherm Model ◽  
High Adsorption Capacity ◽  
Adsorption Equilibrium Data

The development of excellent drug adsorbents and clarifying the interaction mechanisms between adsorbents and adsorbates are greatly desired for a clean environment. Herein, we report that a reduced graphene oxide modified sheeted polyphosphazene (rGO/poly (cyclotriphosphazene-co-4,4′-sulfonyldiphenol)) defined as PZS on rGO was used to remove the tetracycline (TC) drug from an aqueous solution. Compared to PZS microspheres, the adsorption capacity of sheeted PZS@rGO exhibited a high adsorption capacity of 496 mg/g. The adsorption equilibrium data well obeyed the Langmuir isotherm model, and the kinetics isotherm was fitted to the pseudo-second-order model. Thermodynamic analysis showed that the adsorption of TC was an exothermic, spontaneous process. Furthermore, we highlighted the importance of the surface modification of PZS by the introduction of rGO, which tremendously increased the surface area necessary for high adsorption. Along with high surface area, electrostatic attractions, H-bonding, π-π stacking and Lewis acid-base interactions were involved in the high adsorption capacity of PZS@rGO. Furthermore, we also proposed the mechanism of TC adsorption via PZS@rGO.

Unveiling General Rules Governing Dimensional Evolution of Branched TiO2 and Impacts on Photo-electrochemical Behaviours

2021 ◽  
Author(s):  
Teera Butburee ◽  
Yang Bai ◽  
Lianzhou Wang
Keyword(s):  
Titanium Dioxide ◽  
Energy Conversion ◽  
Charge Transport ◽  
Surface Area ◽  
High Surface ◽  
High Surface Area ◽  
General Rules ◽  
Branched Nanostructures

Branched nanostructures represent a unique group of nanoarchitectures exhibiting advantageous high surface area and excellent charge transport for energy conversion application compared to their bulk counterparts. Especially, branched titanium dioxide...

scholarly journals Experimental and Modeling of Dicamba Adsorption in Aqueous Medium Using MIL-101(Cr) Metal-Organic Framework

Processes ◽  
2021 ◽  
Vol 9 (3) ◽  
pp. 419
Author(s):  
Hamza Ahmad Isiyaka ◽  
Khairulazhar Jumbri ◽  
Nonni Soraya Sambudi ◽  
Jun Wei Lim ◽  
Bahruddin Saad ◽  
...  
Keyword(s):  
Aqueous Medium ◽  
Adsorption Capacity ◽  
Environmental Concern ◽  
Metal Organic Framework ◽  
High Surface ◽  
High Surface Area ◽  
Data Matrix ◽  
Adsorption Parameters ◽  
Metal Organic ◽  
Organic Framework

Drift deposition of emerging and carcinogenic contaminant dicamba (3,6-dichloro-2-methoxy benzoic acid) has become a major health and environmental concern. Effective removal of dicamba in aqueous medium becomes imperative. This study investigates the adsorption of a promising adsorbent, MIL-101(Cr) metal-organic framework (MOF), for the removal of dicamba in aqueous solution. The adsorbent was hydrothermally synthesized and characterized using N2 adsorption-desorption isotherms, Brunauer, Emmett and Teller (BET), powdered X-ray diffraction (XRD), Fourier Transformed Infrared (FTIR) and field emission scanning electron microscopy (FESEM). Adsorption models such as kinetics, isotherms and thermodynamics were studied to understand details of the adsorption process. The significance and optimization of the data matrix, as well as the multivariate interaction of the adsorption parameters, were determined using response surface methodology (RSM). RSM and artificial neural network (ANN) were used to predict the adsorption capacity. In each of the experimental adsorption conditions used, the ANN gave a better prediction with minimal error than the RSM model. The MIL-101(Cr) adsorbent was recycled six times to determine the possibility of reuse. The results show that MIL-101(Cr) is a very promising adsorbent, in particular due to the high surface area (1439 m2 g−1), rapid equilibration (~25 min), high adsorption capacity (237.384 mg g−1) and high removal efficiency of 99.432%.

Sign in / Sign up

Export Citation Format

Share Document