A reliable link quality-based RPL routing for Internet of Things

2021 ◽  
Author(s):  
A. S. Joseph Charles ◽  
P. Kalavathi
2020 ◽  
Vol 26 (11) ◽  
pp. 1366-1381
Author(s):  
Sathishkumar Natesan ◽  
Rajakumar Krishnan

The Routing Protocol for Low Power and Lossy Networks (RPL) is operated by gadgets comprised of many devices of embedded type with limited energy, memory as well as resources that do their process. The improvements in the life of the network and energy conservation are the key challenging features in Low Power and Lossy Networks (LLN). Obviously, the LLN has a key strategic part in routing. The Internet of Things (IoT) device is expected to make the apt choice. In LLN, the poor routing choice leads to traffic congestion, reduction in power as well as packet loss ratio. The task in the proposal analyzes Delay (D), Load (L) and Battery Discharge Index (BDI) pivoted Energy Efficient Composite Metric Routing (EECMR) protocol for LLN. The performance of the work in the proposal is evaluated by the COOJA simulator. It outperforms with respect to Network Lifetime (NL), Delay as well as Packet Delivery Ratio (PDR) contrasted to the routing metrics like Traffic Load (TL), Link Quality (LQ), Residual Energy (RE), RE-Battery Discharge Index (RE-BDI) and Hop Count (HC).


2020 ◽  
Vol 16 (10) ◽  
pp. 155014772096435 ◽  
Author(s):  
Muhammad Ilyas ◽  
Zahid Ullah ◽  
Fakhri Alam Khan ◽  
Muhammad Hasanain Chaudary ◽  
Muhammad Sheraz Arshed Malik ◽  
...  

Internet of things grew swiftly and many services, software, sensors-embedded electronic devices and related protocols were developed and still in progress with full swing. Internet of things enabling physically existing things to see, hear, think and perform a notable task by allowing them to talk to each other and share useful information while making decision and caring-on/out their important tasks. Internet of things is greatly promoted by wireless sensor network as it becomes a perpetual layer for it. Wireless sensor network works as a base-stone for most of the Internet of things applications. There are severe general and specific threats and technical challenges to Internet of things–based sensor networks which must overcome to ensure adaptation and diffusion of it. Most of the limitations of wireless sensor networks are due to its resource constraint objects nature. The specified open research challenges in Internet of things–based sensor network are power consumption, network lifespan, network throughput, routing and network security. To overcome aforementioned problems, this work aimed to prolong network lifetime, improve throughput, decrease packet latency/packet loss and further improvise in encountering malicious nodes. To further tune the network lifetime in terms of energy, wireless harvesting energy is suggested in proposed three-layer cluster-based wireless sensor network routing protocol. The proposed mechanism is a three-tier clustering technique with implanted security mechanism to encounter malicious activities of sensor nodes and to slant them into blacklist. It is a centred-based clustering protocol, where selection of cluster head and grid head is carried out by sink node based on the value of its cost function. Moreover, hardware-based link quality estimators are used to check link effectiveness and to further improve routing efficiency. At the end, excessive experiments have been carried out to check efficacy of the proposed protocol. It outperforms most of its counterpart protocols such as fuzzy logic–based unequal clustering and ant colony optimization–based routing hybrid, Artificial Bee Colony-SD, enhanced three-layer hybrid clustering mechanism and energy aware multi-hop routing in terms of network lifetime, network throughput, average energy consumption and packet latency.


Author(s):  
Jing-Shu Sun ◽  
Teng Zhu ◽  
Marcin Wozniak

AbstractCurrent IoT communication node spacing selection process show may potential areas for improvements such as high delay ratio, high total energy consumption ratio, confusion of the optimal communication information band, intelligent spacing node design under the constraints of the energy-saving selection of IoT communication. Based on energy-saving constraints, the link status between nodes is evaluated through link stability and link quality. In order to prevent the generation of serious noisy nodes and frequency hopping data, the interference nodes under the intrusion of the Internet of Things are identified by determining transition amplitude of the noise nodes in the transmission data sequence. Finally, according to the calculation results of the optimal communication node selection, the design of the intelligent spacing selection model for the communication nodes of the Internet of Things is realized. The simulation results show that the established model not only reduces energy consumption of nodes, shortens the average transmission delay of nodes, but also improves anti-interference effect of node spacing selection.


Sensors ◽  
2013 ◽  
Vol 13 (2) ◽  
pp. 1942-1964 ◽  
Author(s):  
Kássio Machado ◽  
Denis Rosário ◽  
Eduardo Cerqueira ◽  
Antonio Loureiro ◽  
Augusto Neto ◽  
...  

Author(s):  
Ruzlaini Ghoni ◽  
Tarmizi Ibrahim

Disaster leads to huge destruction in terms of economic and human lives. While several technologies are available to cater disaster's occurrence, the Internet of Things (IoT) paradigm has opened a promising door toward dealing with disasters. This article proposes IoT-based emergency response management, which is a standalone system that enables wireless connection to trapped survivors, and to the Internet or any extended network during emergency relief operations. The system integrates heterogeneous wireless devices and various communicating technologies to enable end-to-end network connectivity, which is monitored by a cloud IoT platform. The collected data is then pushed to the control center using multi hop device-to-device communication. The overall system performance was evaluated according to relevant metrics including end-to-end link quality estimation, throughput, and delay.


Sensors ◽  
2021 ◽  
Vol 21 (5) ◽  
pp. 1711
Author(s):  
Amaury Bruniaux ◽  
Remous-Aris Koutsiamanis ◽  
Georgios Z. Papadopoulos ◽  
Nicolas Montavont

The emergence of the Internet of Things (IoT) has made wireless connectivity ubiquitous and necessary. Extending the IoT to the Industrial Internet of Things (IIoT) places significant demands in terms of reliability on wireless connectivity. The Institute of Electrical and Electronics Engineers (IEEE) Std 802.15.4-2015 standard was designed in response to these demands, and the IPv6 over Low power Wireless Personal Area Networks (6LoWPAN) adaptation layer was introduced to address (among other issues) its payload size limitations by performing packet compression and fragmentation. However, the standardised method does not cope well with low link-quality situations and, thus, we present the state-of-the-art Forward Error Correction (FEC) methods and introduce our own contribution, Network Coding FEC (NCFEC), to improve performance in these situations. We present and analyse the existing methods as well as our own theoretically, and we then implement them and perform an experimental evaluation using the 6TiSCH simulator. The simulation results demonstrate that when high reliability is required and only low quality links are available, NCFEC performs best, with a trade-off between additional network and computational overhead. In situations where the link quality can be guaranteed to be higher, simpler solutions also start to be feasible, but with reduced adaptation flexibility.


Sign in / Sign up

Export Citation Format

Share Document