An Insight into the Excavation-Induced Stress Paths on Mechanical Response of Weak Interlayer Zone in Underground Cavern Under High Geostress

Author(s):  
Shu-Qian Duan ◽  
Quan Jiang ◽  
Guo-Feng Liu ◽  
Jie-Cheng Xiong ◽  
Po Gao ◽  
...  
Author(s):  
Farhan Javaid ◽  
Habib Pouriayevali ◽  
Karsten Durst

Abstract To comprehend the mechanical behavior of a polycrystalline material, an in-depth analysis of individual grain boundary (GB) and dislocation interactions is of prime importance. In the past decade, nanoindentation emerged as a powerful tool to study the local mechanical response in the vicinity of the GB. The improved instrumentation and test protocols allow to capture various GB–dislocation interactions during the nanoindentation in the form of strain bursts on the load–displacement curve. Moreover, the interaction of the plastic zone with the GB provides important insight into the dislocation transmission effects of distinct grain boundaries. Of great importance for the analysis and interpretation of the observed effects are microstructural investigations and computational approaches. This review paper focused on recent advances in the dislocation–GB interactions and underlying mechanisms studied via nanoindentation, which includes GB pop-in phenomenon, localized grain movement under ambient conditions, and an analysis of the slip transfer mechanism using theoretical treatments and simulations. Graphical abstract


2012 ◽  
Vol 2012 ◽  
pp. 1-5 ◽  
Author(s):  
Leila Costelle ◽  
Liina Lind ◽  
Pasi Jalkanen ◽  
Minna T. Räisänen ◽  
Roman Nowak ◽  
...  

Self-assembled monolayers (SAMs) are promising materials for micromechanical applications. However, characterization of mechanical properties of monolayers is challenging for standard nanoindentation, and new efficient analysis techniques are needed. Hereby, a conventional nanoindentation method has been combined in a unique way with efficient data analysis based on consumed energy calculation and load-displacement data. The procedure has been applied on SAMs of 4,4′-biphenyldithiol (BPDT) on Au, 1-tetradecanethiol (TDT), and 1-hexadecanethiol (HDT) on Au and Ag substrates being the first study where SAMs of the same thiols on different substrates are analyzed by nanoindentation providing a new insight into the substrate effects. Unlike TDT and HDT SAMs, which are found to strongly enhance the homogeneity and stiffness of the underlying substrate, the BPDT covered Au substrate appears softer in mechanical response. In the case of TDT and HDT SAMs on Ag the structures are softer showing also faster relaxation than the corresponding structures on Au substrate. The proposed procedure enables a fast and efficient way of assessing the complex behaviour of SAM modified substrates. As a consequence, the results are relevant to practical issues dependent on layer activity and toughness.


2020 ◽  
Vol 142 (3) ◽  
Author(s):  
Albert I. King ◽  
Michele J. Grimm

Abstract Professor Herbert R. Lissner was a pioneer in impact biomechanics, having initiated research on the injury mechanisms, mechanical response, and human tolerance of the human brain to blunt impact 80 years ago—in 1939. This paper summarizes the contributions made by Professor Lissner in head injury as well as in the many areas of impact biomechanics in which he was involved. In 1977, the Bioengineering Division of ASME established the H. R. Lissner Award to recognize outstanding career achievements in the area of biomechanics. In 1987, this award was converted to a society-wide Medal, and to date it has been awarded to 44 exemplary researchers and educators. The lead author of this paper was Professor Lissner's first and only Ph.D. student, and he offers a unique insight into his research and contributions.


2019 ◽  
Vol 92 ◽  
pp. 11006 ◽  
Author(s):  
Domenico De Sarno ◽  
Enza Vitale ◽  
Dimitri Deneele ◽  
Marco Valerio Nicotera ◽  
Raffaele Papa ◽  
...  

One of the main problems encountered in civil engineering is the management of large amounts of excavated soil, especially when the mechanical properties of this soil are not suitable for its reuse as a construction material. However, the excavated soil could represent a resource if appropriately improved. A suitable solution is the addition of cement and foam to produce lightweight cemented soils (LWCS). In this paper, an insight into the influence of foam on chemo-mineralogical and microstructural features of soil-cement-water system is presented. Time dependent mineralogical and microstructural changes have been monitored by means of X-Ray Diffraction, Thermo-gravimetric analysis and Mercury Intrusion Porosimetry. The present study shows that addition of foam does not alter the chemo-physical evolution of the soil-cement-water system. Large voids are present in the samples as footprint of air bubbles upon mixing, thus increasing porosity. Macroscopic behaviour of treated samples has been investigated by direct shear and oedometric tests. Chemo-physical evolution induced by cement addition is the major responsible for mechanical improvement showed by treated samples. Porosity of samples induced by foam addition plays a key role in the mechanical response of LWCS, inducing a transition of stress-strain behaviour from brittle and dilative to ductile and contractive as a function of increasing foam content.


2017 ◽  
Vol 28 (11) ◽  
pp. 1580-1589 ◽  
Author(s):  
Yuta Shimamoto ◽  
Sachiko Tamura ◽  
Hiroshi Masumoto ◽  
Kazuhiro Maeshima

Cells, as well as the nuclei inside them, experience significant mechanical stress in diverse biological processes, including contraction, migration, and adhesion. The structural stability of nuclei must therefore be maintained in order to protect genome integrity. Despite extensive knowledge on nuclear architecture and components, however, the underlying physical and molecular mechanisms remain largely unknown. We address this by subjecting isolated human cell nuclei to microneedle-based quantitative micromanipulation with a series of biochemical perturbations of the chromatin. We find that the mechanical rigidity of nuclei depends on the continuity of the nucleosomal fiber and interactions between nucleosomes. Disrupting these chromatin features by varying cation concentration, acetylating histone tails, or digesting linker DNA results in loss of nuclear rigidity. In contrast, the levels of key chromatin assembly factors, including cohesin, condensin II, and CTCF, and a major nuclear envelope protein, lamin, are unaffected. Together with in situ evidence using living cells and a simple mechanical model, our findings reveal a chromatin-based regulation of the nuclear mechanical response and provide insight into the significance of local and global chromatin structures, such as those associated with interdigitated or melted nucleosomal fibers.


2014 ◽  
Vol 23 (5-6) ◽  
pp. 141-151 ◽  
Author(s):  
Jianlin Liu ◽  
Runni Wu ◽  
Re Xia

AbstractThe fields of nanotechnology and nanoscience are full of opportunities and challenges. The needed modification of classical continuum mechanics to account for the dramatically novel characteristics and phenomena determining the mechanical response of nanomaterials/structures remains an ambitious goal pursued by mechanics researchers. The theory of surface elasticity proposed by Gurtin and Murdoch has been shown to be an important tool in theoretical nanomechanics. In this paper, we present an overview of recent advances in application of surface elasticity theory at the nanoscale. In particular, we focus on the elastic and plastic deformation, vibration and buckling, fracture and contact behavior of nanoscale solids from one dimension to three dimensions. We hope that this contribution can provide a valuable insight into nanomechanics analysis methods by taking surface effects into account. The results may help to bridge the gap between conventional mechanics and findings from simulation and experiment, in such areas as multifunctional material and micro-electro-mechanical systems.


2014 ◽  
Vol 47 (1) ◽  
pp. 181-187 ◽  
Author(s):  
G. Geandier ◽  
D. Faurie ◽  
P.-O. Renault ◽  
D. Thiaudière ◽  
E. Le Bourhis

X-ray strain pole figures (SPFs) have been capturedin situduring biaxial deformation of a gold ultra-thin film (thickness = 40 nm) deposited on a polymer substrate. An area detector was used to extract one line in the reciprocal space while the strained sample was rotated azimuthally step by step to produce the SPF. Such SPFs have been obtained for a textured anisotropic ultra-thin film under controlled non-equibiaxial loading using the SOLEIL synchrotron DIFFABS tensile device. The experimental setup allows the pole figure measurements of {111} and {200} reflections to be performed simultaneously. Interestingly, those two crystallographic directions are related to the two-extreme elastic mechanical behaviour. The full directional lattice strain dependence (SPF) is obtained within 15 min and can be monitored step by step upon loading. This procedure gives an insight into ultra-thin film mechanical response under complex biaxial loading.


Author(s):  
Rong Fan ◽  
Michael S. Sacks

Constitutive modeling is critical for numerical simulation and analysis of soft biological tissues. The highly nonlinear and anisotropic mechanical behaviors of soft tissues are typically due to the interaction of tissue microstructure. By incorporating information of fiber orientation and distribution at tissue microscopic scale, the structural model avoids ambiguities in material characterization. Moreover, structural models produce much more information than just simple stress-strain results, but can provide much insight into how soft tissues internally reorganize to external loads by adjusting their internal microstructure. It is only through simulation of an entire organ system can such information be derived and provide insight into physiological function. However, accurate implementation and rigorous validation of these models remains very limited. In the present study we implemented a structural constitutive model into a commercial finite element package for planar soft tissues. The structural model was applied to simulate strip biaxial test for native bovine pericardium, and a single pulmonary valve leaflet deformation. In addition to prediction of the mechanical response, we demonstrate how a structural model can provide deeper insights into fiber deformation fiber reorientation and fiber recruitment.


Sign in / Sign up

Export Citation Format

Share Document