One-step electrochemical deposition of thin film titanium suboxide in basic titanyl sulfate solution at room temperature

2020 ◽  
Vol 24 (4) ◽  
pp. 975-986
Author(s):  
Zeliha Ertekin ◽  
Nuran Özçiçek Pekmez ◽  
Kadir Pekmez
Author(s):  
R. C. Moretz ◽  
G. G. Hausner ◽  
D. F. Parsons

Use of the electron microscope to examine wet objects is possible due to the small mass thickness of the equilibrium pressure of water vapor at room temperature. Previous attempts to examine hydrated biological objects and water itself used a chamber consisting of two small apertures sealed by two thin films. Extensive work in our laboratory showed that such films have an 80% failure rate when wet. Using the principle of differential pumping of the microscope column, we can use open apertures in place of thin film windows.Fig. 1 shows the modified Siemens la specimen chamber with the connections to the water supply and the auxiliary pumping station. A mechanical pump is connected to the vapor supply via a 100μ aperture to maintain steady-state conditions.


Author(s):  
E. L. Vigil ◽  
E. F. Erbe

In cotton seeds the radicle has 12% moisture content which makes it possible to prepare freeze-fracture replicas without fixation or cryoprotection. For this study we have examined replicas of unfixed radicle tissue fractured at room temperature to obtain data on organelle and membrane structure.Excised radicles from seeds of cotton (Gossyplum hirsutum L. M-8) were fractured at room temperature along the longitudinal axis. The fracture was initiated by spliting the basal end of the excised radicle with a razor. This procedure produced a fracture through the tissue along an unknown fracture plane. The warm fractured radicle halves were placed on a thin film of 100% glycerol on a flat brass cap with fracture surface up. The cap was rapidly plunged into liquid nitrogen and transferred to a freeze- etch unit. The sample was etched for 3 min at -95°C to remove any condensed water vapor and then cooled to -150°C for platinum/carbon evaporation.


2020 ◽  
Vol 24 (4) ◽  
pp. 465-471 ◽  
Author(s):  
Zita Rádai ◽  
Réka Szabó ◽  
Áron Szigetvári ◽  
Nóra Zsuzsa Kiss ◽  
Zoltán Mucsi ◽  
...  

The phospha-Brook rearrangement of dialkyl 1-aryl-1-hydroxymethylphosphonates (HPs) to the corresponding benzyl phosphates (BPs) has been elaborated under solid-liquid phase transfer catalytic conditions. The best procedure involved the use of triethylbenzylammonium chloride as the catalyst and Cs2CO3 as the base in acetonitrile as the solvent at room temperature. The substrate dependence of the rearrangement has been studied, and the mechanism of the transformation under discussion was explored by quantum chemical calculations. The key intermediate is an oxaphosphirane. The one-pot version starting with the Pudovik reaction has also been developed. The conditions of this tandem transformation were the same, as those for the one-step HP→BP conversion.


Optik ◽  
2021 ◽  
Vol 234 ◽  
pp. 166615
Author(s):  
S.R. Cynthia ◽  
R. Sivakumar ◽  
C. Sanjeeviraja

Author(s):  
Kumar Haunsbhavi ◽  
Karuppiah Deva Arun Kumar ◽  
Paolo Mele ◽  
Omar M. Aldossary ◽  
Mohd Ubaidullah ◽  
...  

2021 ◽  
Vol 13 (2) ◽  
pp. 3445-3453
Author(s):  
Wei Huang ◽  
Xinge Yu ◽  
Li Zeng ◽  
Binghao Wang ◽  
Atsuro Takai ◽  
...  

2021 ◽  
Vol 45 (7) ◽  
pp. 3469-3478
Author(s):  
Zongyu Liu ◽  
Ying Tian ◽  
Xuewei Dong ◽  
Xiaohui Zhou ◽  
Xiao Liu ◽  
...  

A Ni/CTF was used as the cathode for electroreduction of imidacloprid, achieving a 92.1% removal efficiency for the electroreduction of imidacloprid.


Nanoscale ◽  
2021 ◽  
Author(s):  
Kalyan Ghosh ◽  
Martin Pumera

Room temperature electrochemical deposition of transition metal chalcogenide (MoSx) on 3D-printed nanocarbon fibers based electrodes for custom shaped solid-state supercapacitor.


Sign in / Sign up

Export Citation Format

Share Document