scholarly journals Highly efficient electrocatalytic hydrogen evolution reaction on carbonized porous conducting polymers

2020 ◽  
Vol 24 (11-12) ◽  
pp. 2763-2771
Author(s):  
Abhishek Lahiri ◽  
Guozhu Li ◽  
Frank Endres
Keyword(s):  
Conducting Polymers ◽  
Hydrogen Evolution ◽  
Hydrogen Evolution Reaction ◽  
Rational Design ◽  
High Surface ◽  
High Surface Area ◽  
Fine Tuning ◽  
Great Promise ◽  
Copolymer Composition ◽  
Electrochemical Approach

Abstract A rational design of an efficient and inexpensive electrocatalyst for water splitting still remains a challenge. Porous conducting polymers are attractive materials which not only provide a high surface area for electrocatalysis but also absorb light which can be harnessed in photoelectrocatalysis. Here, a novel and inexpensive electrochemical approach is developed to obtain nanoporous conducting copolymers with tunable light absorbance and porosity. By fine-tuning the copolymer composition and upon heat treatment, an excellent electrocatalytic hydrogen evolution reaction (HER) was achieved in alkaline solution with an overpotential of just 77 mV to obtain a current density of 10 mA cm−2. Such an overpotential is remarkably low compared with other reported values for polymers in an alkaline medium. The nanoporous copolymer developed here shows a great promise of using metal-free electrocatalysts and brings about new avenues for exploitation of these porous conducting polymers.

Atomically Ordered Rh2P Catalysts Anchored within Hollow Mesoporous Carbon for Efficient Hydrogen Production

2021 ◽  
Author(s):  
Xuwen Guo ◽  
Xin Chen ◽  
Yanping Huang ◽  
Xiaowen Min ◽  
Chuncai Kong ◽  
...  
Keyword(s):  
Hydrogen Production ◽  
Surface Area ◽  
Hydrogen Evolution ◽  
Hydrogen Evolution Reaction ◽  
Mesoporous Carbon ◽  
Room Temperature ◽  
High Surface ◽  
High Surface Area ◽  
Catalytically Active

Atomically ordered Rh2P nanocluster encapsulated within a high-surface-area hollow mesoporous carbon nanoreactor (Rh2P@HMC) is catalytically active for hydrogen production via electrocatalytic hydrogen evolution reaction (HER) and room-temperature dehydrogenation of ammonia...

scholarly journals Ni3Se4@MoSe2 Composites for Hydrogen Evolution Reaction

2019 ◽  
Vol 9 (23) ◽  
pp. 5035 ◽  
Author(s):  
Wenwu Guo ◽  
Quyet Van Le ◽  
Ha Huu Do ◽  
Amirhossein Hasani ◽  
Mahider Tekalgne ◽  
...  
Keyword(s):  
Hydrogen Evolution ◽  
Performance Improvement ◽  
Hydrogen Evolution Reaction ◽  
High Surface ◽  
High Surface Area ◽  
Transition Metal Dichalcogenides ◽  
Accelerate Electron ◽  
Highly Active ◽  
Metal Dichalcogenides

Transition metal dichalcogenides (TMDs) have been considered as one of the most promising electrocatalysts for the hydrogen evolution reaction (HER). Many studies have demonstrated the feasibility of significant HER performance improvement of TMDs by constructing composite materials with Ni-based compounds. In this work, we prepared Ni3Se4@MoSe2 composites as electrocatalysts for the HER by growing in situ MoSe2 on the surface of Ni3Se4 nanosheets. Electrochemical measurements revealed that Ni3Se4@MoSe2 nanohybrids are highly active and durable during the HER process, which exhibits a low onset overpotential (145 mV) and Tafel slope (65 mV/dec), resulting in enhanced HER performance compared to pristine MoSe2 nanosheets. The enhanced HER catalytic activity is ascribed to the high surface area of Ni3Se4 nanosheets, which can both efficiently prevent the agglomeration issue of MoSe2 nanosheets and create more catalytic edge sites, hence accelerate electron transfer between MoSe2 and the working electrode in the HER. This approach provides an effective pathway for catalytic enhancement of MoSe2 electrocatalysts and can be applied for other TMD electrocatalysts.

scholarly journals Rugae-like FeP nanocrystal assembly on a carbon cloth: an exceptionally efficient and stable cathode for hydrogen evolution

Nanoscale ◽  
2015 ◽  
Vol 7 (25) ◽  
pp. 10974-10981 ◽  
Author(s):  
Xiulin Yang ◽  
Ang-Yu Lu ◽  
Yihan Zhu ◽  
Shixiong Min ◽  
Mohamed Nejib Hedhili ◽  
...  
Keyword(s):  
Gas Phase ◽  
Surface Area ◽  
Hydrogen Evolution ◽  
Hydrogen Generation ◽  
High Surface ◽  
High Surface Area ◽  
Catalytic Efficiency ◽  
Carbon Cloth ◽  
Nanocrystal Assembly

High surface area FeP nanosheets on a carbon cloth were prepared by gas phase phosphidation of electroplated FeOOH, which exhibit exceptionally high catalytic efficiency and stability for hydrogen generation.

scholarly journals Electrochemical Response of Glucose Oxidase Adsorbed on Laser-Induced Graphene

Nanomaterials ◽  
2021 ◽  
Vol 11 (8) ◽  
pp. 1893
Author(s):  
Sónia O. Pereira ◽  
Nuno F. Santos ◽  
Alexandre F. Carvalho ◽  
António J. S. Fernandes ◽  
Florinda M. Costa
Keyword(s):  
Electron Transfer ◽  
Glucose Oxidase ◽  
Ph Dependence ◽  
High Surface ◽  
High Surface Area ◽  
Cost Effective ◽  
Great Promise ◽  
Glucose Detection ◽  
Half Wave ◽  
Electrochemical Transducers

Carbon-based electrodes have demonstrated great promise as electrochemical transducers in the development of biosensors. More recently, laser-induced graphene (LIG), a graphene derivative, appears as a great candidate due to its superior electron transfer characteristics, high surface area and simplicity in its synthesis. The continuous interest in the development of cost-effective, more stable and reliable biosensors for glucose detection make them the most studied and explored within the academic and industry community. In this work, the electrochemistry of glucose oxidase (GOx) adsorbed on LIG electrodes is studied in detail. In addition to the well-known electroactivity of free flavin adenine dinucleotide (FAD), the cofactor of GOx, at the expected half-wave potential of −0.490 V vs. Ag/AgCl (1 M KCl), a new well-defined redox pair at 0.155 V is observed and shown to be related to LIG/GOx interaction. A systematic study was undertaken in order to understand the origin of this activity, including scan rate and pH dependence, along with glucose detection tests. Two protons and two electrons are involved in this reaction, which is shown to be sensitive to the concentration of glucose, restraining its origin to the electron transfer from FAD in the active site of GOx to the electrode via direct or mediated by quinone derivatives acting as mediators.

scholarly journals Engineering Ruthenium-Based Electrocatalysts for Effective Hydrogen Evolution Reaction

2021 ◽  
Vol 13 (1) ◽  
Author(s):  
Yingjie Yang ◽  
Yanhui Yu ◽  
Jing Li ◽  
Qingrong Chen ◽  
Yanlian Du ◽  
...  
Keyword(s):  
Hydrogen Evolution ◽  
Hydrogen Evolution Reaction ◽  
Rational Design ◽  
Energy System ◽  
Structure Design ◽  
Single Atom ◽  
Research Progress ◽  
Pure Hydrogen ◽  
Hydrogen Energy ◽  
Practical Applications

AbstractThe investigation of highly effective, durable, and cost-effective electrocatalysts for the hydrogen evolution reaction (HER) is a prerequisite for the upcoming hydrogen energy society. To establish a new hydrogen energy system and gradually replace the traditional fossil-based energy, electrochemical water-splitting is considered the most promising, environmentally friendly, and efficient way to produce pure hydrogen. Compared with the commonly used platinum (Pt)-based catalysts, ruthenium (Ru) is expected to be a good alternative because of its similar hydrogen bonding energy, lower water decomposition barrier, and considerably lower price. Analyzing and revealing the HER mechanisms, as well as identifying a rational design of Ru-based HER catalysts with desirable activity and stability is indispensable. In this review, the research progress on HER electrocatalysts and the relevant describing parameters for HER performance are briefly introduced. Moreover, four major strategies to improve the performance of Ru-based electrocatalysts, including electronic effect modulation, support engineering, structure design, and maximum utilization (single atom) are discussed. Finally, the challenges, solutions and prospects are highlighted to prompt the practical applications of Ru-based electrocatalysts for HER.

scholarly journals Engineering single-atomic ruthenium catalytic sites on defective nickel-iron layered double hydroxide for overall water splitting

2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Panlong Zhai ◽  
Mingyue Xia ◽  
Yunzhen Wu ◽  
Guanghui Zhang ◽  
Junfeng Gao ◽  
...  
Keyword(s):  
Hydrogen Evolution ◽  
Water Splitting ◽  
Layered Double Hydroxide ◽  
Hydrogen Evolution Reaction ◽  
Active Sites ◽  
Density Functional ◽  
Rational Design ◽  
Single Atom ◽  
Nickel Iron ◽  
Double Hydroxide

AbstractRational design of single atom catalyst is critical for efficient sustainable energy conversion. However, the atomic-level control of active sites is essential for electrocatalytic materials in alkaline electrolyte. Moreover, well-defined surface structures lead to in-depth understanding of catalytic mechanisms. Herein, we report a single-atomic-site ruthenium stabilized on defective nickel-iron layered double hydroxide nanosheets (Ru1/D-NiFe LDH). Under precise regulation of local coordination environments of catalytically active sites and the existence of the defects, Ru1/D-NiFe LDH delivers an ultralow overpotential of 18 mV at 10 mA cm−2 for hydrogen evolution reaction, surpassing the commercial Pt/C catalyst. Density functional theory calculations reveal that Ru1/D-NiFe LDH optimizes the adsorption energies of intermediates for hydrogen evolution reaction and promotes the O–O coupling at a Ru–O active site for oxygen evolution reaction. The Ru1/D-NiFe LDH as an ideal model reveals superior water splitting performance with potential for the development of promising water-alkali electrocatalysts.

Sign in / Sign up

Export Citation Format

Share Document