Characterization of major, unused, and unvalued Indonesian wood species I. Dependencies of mechanical properties in transverse direction on the changes of moisture content and/or temperature

2004 ◽  
Vol 50 (4) ◽  
pp. 371-374 ◽  
Author(s):  
Sudijono ◽  
Wahyu Dwianto ◽  
Sulaeman Yusuf ◽  
Ikuho Iida ◽  
Yuzo Furuta ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Moisture Content ◽  
Wood Species ◽  
Transverse Direction

Influence of Moisture Content in some Mechanical Properties of Two Brazilian Tropical Wood Species

2014 ◽  
Vol 1025-1026 ◽  
pp. 42-45 ◽  
Author(s):  
Luiz A. Melgaço N. Branco ◽  
Eduardo Chahud ◽  
André Luis Christoforo ◽  
Francisco Antonio Rocco Lahr ◽  
Rosane A.G. Battistelle ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Shear Strength ◽  
Moisture Content ◽  
Analysis Of Variance ◽  
Wood Species ◽  
Modulus Of Elasticity ◽  
Modulus Of Rupture ◽  
Tropical Wood ◽  
Fiber Saturation ◽  
Brazilian Standard

This study aimed, with the aid of analysis of variance (ANOVA), to investigate and quantify the influence of moisture ranging between 12% and over 30% (fiber saturation) on the mechanical properties: strength and modulus of elasticity in compression and in tension parallel to grain; modulus of rupture and modulus of elasticity in static bending; shear strength parallel to grain considering wood species Ipê (Tabebuia sp) and Angelim Araroba (Vataireopsis araroba). Tests were performed according to the assumptions and calculating methods Brazilian standard ABNT NBR 7190, Anexx B, totalizing 400 tests. Results of ANOVA revealed a significant reduction (16% on average) for mechanical properties wood due to the increase in moisture content from 12% to over 30% (fiber saturation). The same behavior also occurred when assembly containing the two species was considered.

scholarly journals Characterization of Mechanical and Hygroscopic Properties of Individual Canes of Reed

Materials ◽  
2021 ◽  
Vol 14 (9) ◽  
pp. 2193
Author(s):  
Montaña Jiménez-Espada ◽  
Daniel Herrero-Adán ◽  
Rafael González-Escobar
Keyword(s):  
Mechanical Properties ◽  
Moisture Content ◽  
Environmentally Friendly ◽  
Structural Performance ◽  
Structural Requirements ◽  
Cellulose Material ◽  
Hygroscopic Properties ◽  
Strong Candidate ◽  
Strength And Stiffness

The search for sustainability has led to the utilization of more ecological materials with at least, a similar structural performance to those used at present. In this regard, reed fits the environmental and structural requirements as it is a sustainable and biodegradable lignin-cellulose material with remarkable mechanical properties. This research confirms the reed’s structural efficiency as it demonstrates that it has excellent strength and stiffness in relation to its density. The reed anisotropy has a large impact on its properties. Indeed, the strength and stiffness parallel to the fibers are clearly higher than in the perpendicular direction. The results confirm that strength and stiffness decrease with the moisture content and nodes act as reinforcement in compression and bending. If compared with steel, timber and concrete, the reed possesses the highest value for strength. Hence, reed constitutes a strong candidate for environmentally friendly engineering.

scholarly journals PHYSICAL AND MECHANICAL CHARACTERIZATION OF PLANCHONELLA PACHYCARPA WOOD SPECIES FOR USE IN STRUCTURAL PURPOSE

Wood Research ◽  
2021 ◽  
Vol 66 (2) ◽  
pp. 267-276
Author(s):  
Vinicius Borges De Moura Aquino ◽  
Marcus Vinicius Pereira De Freitas ◽  
Claudia Queiroz De Vasconcelos ◽  
João Paulo Boff Almeida ◽  
Felipe Nascimento Arroyo ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Apparent Density ◽  
Wood Species ◽  
Regression Models ◽  
Physical And Mechanical Properties ◽  
Stiffness Properties ◽  
Longitudinal Elastic Modulus ◽  
Structural Purpose ◽  
Brazilian Standard

This research aimed to characterize the wood species Goiabão (Planchonella pachycarpa), following the precepts set forth in the Brazilian standard ABNT NBR 7190, as well as to evaluate the possibility of estimating physical and mechanical properties, using the analysis of variance (ANOVA) as a function of apparent density, and also to estimate the stiffness properties as a function of the respective strength property. The physical and mechanical properties were considered adequate for the use of this wood for structural purposes, being classified in class C40. According to the results of the regression models, it is possible to estimate the tensile strength parallel to the fibers as a function of the apparent density. It was also possible to estimate the longitudinal elastic modulus in the compression parallel to the fibers as a function of the compressive strength parallel to the fibers.

scholarly journals Sifat Kayu Lapis yang Dibuat dari Lima Jenis Kayu Asal Riau

2020 ◽  
Vol 25 (4) ◽  
pp. 657-663
Author(s):  
Achmad Supriadi ◽  
Deazy Rachmi Trisatya ◽  
Ignasia Maria Sulastiningsih
Keyword(s):  
Mechanical Properties ◽  
Moisture Content ◽  
Wood Species ◽  
Bonding Strength ◽  
Urea Formaldehyde ◽  
Physical And Mechanical Properties ◽  
Modulus Of Rupture ◽  
National Standard ◽  
Randomized Design ◽  
Completely Randomized Design

The objective of this study was to determine the physical and mechanical properties of plywood made of punak (Tetramerista glabra Miq.), meranti bunga (Shorea teysmanniana Dyer ex Brandis), mempisang (Alphonsea spp.), suntai (Palaqium burckii H.J.L.), and pasak linggo (Aglaia argentea Blume). Liquid urea formaldehyde (UF) was used as an adhesive. Data analysis was carried out using a completely randomized design. Results showed that the moisture content and density of plywood produced in this study were around 10.4-10.95% and 0.65 to 0.93 g/cm3, respectively. The modulus of elasticity (MOE) and modulus of rupture (MOR) of plywood produced were between 63.371-123.548 kg/cm2 and 517-1.052 kg/cm2, respectively. It was also found that the tensile strength and bonding strength of the plywood produced were 461.6-1.095 kg/cm2 and 18.97-31.79 kg/cm2, respectively. It was recorded that moisture content and the bonding strength of the plywood produced met the Indonesian National Standard of Plywood. Among others, plywood produced from pasak linggo showed a superior quality. Referring to statistical analysis, it was confirmed that physical and mechanical properties of plywood were significantly affected by wood species, except moisture content. Keywords: mechanical properties, physical properties, plywood, Riau wood species

Microstructural and fractographic characterization of B4C-Al cermets tested under dynamic and static loading

1989 ◽  
Vol 47 ◽  
pp. 562-563
Author(s):  
Gyeung Ho Kim ◽  
Mehmet Sarikaya ◽  
D. L. Milius ◽  
I. A. Aksay
Keyword(s):  
Thin Film ◽  
Mechanical Properties ◽  
Fracture Toughness ◽  
Static Loading ◽  
Carbon Deposition ◽  
Full Density ◽  
Unique Combination ◽  
Strong Component ◽  
Reaction Products

Cermets are designed to optimize the mechanical properties of ceramics (hard and strong component) and metals (ductile and tough component) into one system. However, the processing of such systems is a problem in obtaining fully dense composite without deleterious reaction products. In the lightweight (2.65 g/cc) B4C-Al cermet, many of the processing problems have been circumvented. It is now possible to process fully dense B4C-Al cermet with tailored microstructures and achieve unique combination of mechanical properties (fracture strength of over 600 MPa and fracture toughness of 12 MPa-m1/2). In this paper, microstructure and fractography of B4C-Al cermets, tested under dynamic and static loading conditions, are described.The cermet is prepared by infiltration of Al at 1150°C into partially sintered B4C compact under vacuum to full density. Fracture surface replicas were prepared by using cellulose acetate and thin-film carbon deposition. Samples were observed with a Philips 3000 at 100 kV.

Characterization of interfaces in CVD-coated nicalon fiber-reinforced SiC

1989 ◽  
Vol 47 ◽  
pp. 556-557
Author(s):  
K.L. More ◽  
R.A. Lowden
Keyword(s):  
Mechanical Properties ◽  
Fracture Toughness ◽  
Chemical Vapor ◽  
Chemical Vapor Infiltration ◽  
Frictional Stress ◽  
Fiber Reinforced ◽  
Pull Out ◽  
Carbon Coated ◽  
Fiber Matrix

The mechanical properties of fiber-reinforced composites are directly related to the nature of the fiber-matrix bond. Fracture toughness is improved when debonding, crack deflection, and fiber pull-out occur which in turn depend on a weak interfacial bond. The interfacial characteristics of fiber-reinforced ceramics can be altered by applying thin coatings to the fibers prior to composite fabrication. In a previous study, Lowden and co-workers coated Nicalon fibers (Nippon Carbon Company) with silicon and carbon prior to chemical vapor infiltration with SiC and determined the influence of interfacial frictional stress on fracture phenomena. They found that the silicon-coated Nicalon fiber-reinforced SiC had low flexure strengths and brittle fracture whereas the composites containing carbon coated fibers exhibited improved strength and fracture toughness. In this study, coatings of boron or BN were applied to Nicalon fibers via chemical vapor deposition (CVD) and the fibers were subsequently incorporated in a SiC matrix. The fiber-matrix interfaces were characterized using transmission and scanning electron microscopy (TEM and SEM). Mechanical properties were determined and compared to those obtained for uncoated Nicalon fiber-reinforced SiC.

Sign in / Sign up

Export Citation Format

Share Document