scholarly journals Air pollution forecasting application based on deep learning model and optimization algorithm

2021 ◽  
Author(s):  
Azim Heydari ◽  
Meysam Majidi Nezhad ◽  
Davide Astiaso Garcia ◽  
Farshid Keynia ◽  
Livio De Santoli
Keyword(s):  
Air Pollution ◽  
Wind Speed ◽  
Power Plant ◽  
Air Temperature ◽  
Short Term Memory ◽  
Combined Cycle ◽  
Short Term ◽  
Term Memory ◽  
Proposed Model ◽  
Long Short Term Memory

AbstractAir pollution monitoring is constantly increasing, giving more and more attention to its consequences on human health. Since Nitrogen dioxide (NO2) and sulfur dioxide (SO2) are the major pollutants, various models have been developed on predicting their potential damages. Nevertheless, providing precise predictions is almost impossible. In this study, a new hybrid intelligent model based on long short-term memory (LSTM) and multi-verse optimization algorithm (MVO) has been developed to predict and analysis the air pollution obtained from Combined Cycle Power Plants. In the proposed model, long short-term memory model is a forecaster engine to predict the amount of produced NO2 and SO2 by the Combined Cycle Power Plant, where the MVO algorithm is used to optimize the LSTM parameters in order to achieve a lower forecasting error. In addition, in order to evaluate the proposed model performance, the model has been applied using real data from a Combined Cycle Power Plant in Kerman, Iran. The datasets include wind speed, air temperature, NO2, and SO2 for five months (May–September 2019) with a time step of 3-h. In addition, the model has been tested based on two different types of input parameters: type (1) includes wind speed, air temperature, and different lagged values of the output variables (NO2 and SO2); type (2) includes just lagged values of the output variables (NO2 and SO2). The obtained results show that the proposed model has higher accuracy than other combined forecasting benchmark models (ENN-PSO, ENN-MVO, and LSTM-PSO) considering different network input variables. Graphic abstract

Multi-step wind speed forecasting based on hybrid multi-stage decomposition model and long short-term memory neural network

2020 ◽  
Vol 213 ◽  
pp. 112869 ◽  
Author(s):  
Sinvaldo Rodrigues Moreno ◽  
Ramon Gomes da Silva ◽  
Viviana Cocco Mariani ◽  
Leandro dos Santos Coelho
Keyword(s):  
Neural Network ◽  
Wind Speed ◽  
Short Term Memory ◽  
Short Term ◽  
Term Memory ◽  
Wind Speed Forecasting ◽  
Decomposition Model ◽  
Multi Stage ◽  
Long Short Term Memory

scholarly journals PREDICTING DAILY PM2.5 USING WEIGHTED LONG SHORT-TERM MEMORY NEURAL NETWORK MODEL

2020 ◽  
Vol XLIII-B3-2020 ◽  
pp. 1451-1455
Author(s):  
H. Fan ◽  
M. Yang ◽  
F. Xiao ◽  
K. Zhao
Keyword(s):  
Neural Network ◽  
Air Pollution ◽  
Short Term Memory ◽  
Meteorological Data ◽  
Series Data ◽  
Wind Condition ◽  
Short Term ◽  
Term Memory ◽  
Long Short Term Memory ◽  
Pm2.5 Concentration

Abstract. Over the past few decades, air pollution has caused serious damage on public health, thus making accurate predictions of PM2.5 crucial. Due to the transportation of air pollutants among areas, the PM2.5 concentration is strongly spatiotemporal correlated. However, the distribution of air pollution monitoring sites is not even, making the spatiotemporal correlation between the central site and surrounding sites varies with different density of sites, and this was neglected by most existing methods. To tackle this problem, this study proposed a weighted long short-term memory neural network extended model (WLSTME), which addressed the issue that how to consider the effect of the density of sites and wind condition on the spatiotemporal correlation of air pollution concentration. First, several the nearest surrounding sites were chosen as the neighbour sites to the central station, and their distance as well as their air pollution concentration and wind condition were input to multi-layer perception (MLP) to generate weighted historical PM2.5 time series data. Second, historical PM2.5 concentration of the central site and weighted PM2.5 series data of neighbour sites were input into LSTM to address spatiotemporal dependency simultaneously and extract spatiotemporal features. Finally, another MLP was utilized to integrate spatiotemporal features extracted above with the meteorological data of central site to generate the forecasts future PM_2.5 concentration of the central site. Daily PM_2.5 concentration and meteorological data on Beijing–Tianjin–Hebei from 2015 to 2017 were collected to train models and evaluate the performance. Experimental results with 3 other methods showed that the proposed WLSTME model has the lowest RMSE (40.67) and MAE (26.10) and the highest p (0.59). This finding confirms that WLSTME can significantly improve the PM2.5 prediction accuracy.

scholarly journals Deep Learning for Wave Energy Converter Modeling Using Long Short Term Memory

2021 ◽  
Author(s):  
Seyed Milad Mousavi ◽  
Majid Ghasemi ◽  
Mahsa Dehghan Manshadi ◽  
Amir Mosavi
Keyword(s):  
Wind Speed ◽  
Output Power ◽  
Wave Energy ◽  
Short Term Memory ◽  
Ocean Waves ◽  
Wave Energy Converter ◽  
Energy Converter ◽  
Short Term ◽  
Term Memory ◽  
Long Short Term Memory

Accurate forecasts of ocean waves energy can not only reduce costs for investment but it is also essential for management and operation of electrical power. This paper presents an innovative approach based on the Long Short Term Memory (LSTM) to predict the power generation of an economical wave energy converter named “Searaser”. The data for analyzing is provided by collecting the experimental data from another study and the exerted data from numerical simulation of searaser. The simulation is done with Flow-3D software which has high capability in analyzing the fluid solid interactions. The lack of relation between wind speed and output power in previous studies needs to be investigated in this field. Therefore, in this study the wind speed and output power are related with a LSTM method. Moreover, it can be inferred that the LSTM Network is able to predict power in terms of height more accurately and faster than the numerical solution in a field of predicting. The network output figures show a great agreement and the root mean square is 0.49 in the mean value related to the accuracy of LSTM method. Furthermore, the mathematical relation between the generated power and wave height was introduced by curve fitting of the power function to the result of LSTM method.

Production Forecasting with the Interwell Interference by Integrating Graph Convolutional and Long Short-Term Memory Neural Network

2021 ◽  
pp. 1-17
Author(s):  
Enda Du ◽  
Yuetian Liu ◽  
Ziyan Cheng ◽  
Liang Xue ◽  
Jing Ma ◽  
...  
Keyword(s):  
Neural Network ◽  
Short Term Memory ◽  
Short Term ◽  
Term Memory ◽  
Production Forecasting ◽  
Temporal Correlations ◽  
Proposed Model ◽  
The Mean ◽  
Long Short Term Memory ◽  
The Impact

Summary Accurate production forecasting is an essential task and accompanies the entire process of reservoir development. With the limitation of prediction principles and processes, the traditional approaches are difficult to make rapid predictions. With the development of artificial intelligence, the data-driven model provides an alternative approach for production forecasting. To fully take the impact of interwell interference on production into account, this paper proposes a deep learning-based hybrid model (GCN-LSTM), where graph convolutional network (GCN) is used to capture complicated spatial patterns between each well, and long short-term memory (LSTM) neural network is adopted to extract intricate temporal correlations from historical production data. To implement the proposed model more efficiently, two data preprocessing procedures are performed: Outliers in the data set are removed by using a box plot visualization, and measurement noise is reduced by a wavelet transform. The robustness and applicability of the proposed model are evaluated in two scenarios of different data types with the root mean square error (RMSE), the mean absolute error (MAE), and the mean absolute percentage error (MAPE). The results show that the proposed model can effectively capture spatial and temporal correlations to make a rapid and accurate oil production forecast.

Ensemble-Based Feature Selection With Long Short-Term Memory for Classification of Network Intrusion

2021 ◽  
pp. 228-245
Author(s):  
Preethi D. ◽  
Neelu Khare
Keyword(s):  
Feature Selection ◽  
Performance Metrics ◽  
Short Term Memory ◽  
Short Term ◽  
Chi Square ◽  
Term Memory ◽  
Network Intrusion ◽  
Proposed Model ◽  
Long Short Term Memory

This chapter presents an ensemble-based feature selection with long short-term memory (LSTM) model. A deep recurrent learning model is proposed for classifying network intrusion. This model uses ensemble-based feature selection (EFS) for selecting the appropriate features from the dataset and long short-term memory for the classification of network intrusions. The EFS combines five feature selection techniques, namely information gain, gain ratio, chi-square, correlation-based feature selection, and symmetric uncertainty-based feature selection. The experiments were conducted using the standard benchmark NSL-KDD dataset and implemented using tensor flow and python. The proposed model is evaluated using the classification performance metrics and also compared with all the 41 features without any feature selection as well as with each individual feature selection technique and classified using LSTM. The performance study showed that the proposed model performs better, with 99.8% accuracy, with a higher detection and lower false alarm rates.

scholarly journals Forecasting Day-Ahead Hourly Photovoltaic Power Generation Using Convolutional Self-Attention Based Long Short-Term Memory

Energies ◽  
2020 ◽  
Vol 13 (15) ◽  
pp. 4017 ◽  
Author(s):  
Dukhwan Yu ◽  
Wonik Choi ◽  
Myoungsoo Kim ◽  
Ling Liu
Keyword(s):  
Power Generation ◽  
Deep Learning ◽  
Prediction Accuracy ◽  
Short Term Memory ◽  
Local Context ◽  
Short Term ◽  
Term Memory ◽  
Proposed Model ◽  
Long Short Term Memory ◽  
Pv Power Generation

The problem of Photovoltaic (PV) power generation forecasting is becoming crucial as the penetration level of Distributed Energy Resources (DERs) increases in microgrids and Virtual Power Plants (VPPs). In order to improve the stability of power systems, a fair amount of research has been proposed for increasing prediction performance in practical environments through statistical, machine learning, deep learning, and hybrid approaches. Despite these efforts, the problem of forecasting PV power generation remains to be challenging in power system operations since existing methods show limited accuracy and thus are not sufficiently practical enough to be widely deployed. Many existing methods using long historical data suffer from the long-term dependency problem and are not able to produce high prediction accuracy due to their failure to fully utilize all features of long sequence inputs. To address this problem, we propose a deep learning-based PV power generation forecasting model called Convolutional Self-Attention based Long Short-Term Memory (LSTM). By using the convolutional self-attention mechanism, we can significantly improve prediction accuracy by capturing the local context of the data and generating keys and queries that fit the local context. To validate the applicability of the proposed model, we conduct extensive experiments on both PV power generation forecasting using a real world dataset and power consumption forecasting. The experimental results of power generation forecasting using the real world datasets show that the MAPEs of the proposed model are much lower, in fact by 7.7%, 6%, 3.9% compared to the Deep Neural Network (DNN), LSTM and LSTM with the canonical self-attention, respectively. As for power consumption forecasting, the proposed model exhibits 32%, 17% and 44% lower Mean Absolute Percentage Error (MAPE) than the DNN, LSTM and LSTM with the canonical self-attention, respectively.

scholarly journals Hybrid Forecasting Model for Short-Term Wind Power Prediction Using Modified Long Short-Term Memory

Energies ◽  
2019 ◽  
Vol 12 (20) ◽  
pp. 3901 ◽  
Author(s):  
Namrye Son ◽  
Seunghak Yang ◽  
Jeongseung Na
Keyword(s):  
Wind Speed ◽  
Wind Energy ◽  
Wind Power ◽  
Short Term Memory ◽  
Hybrid Methods ◽  
Observation Data ◽  
Short Term ◽  
Term Memory ◽  
Current Observation ◽  
Long Short Term Memory

Renewable energy has recently gained considerable attention. In particular, the interest in wind energy is rapidly growing globally. However, the characteristics of instability and volatility in wind energy systems also affect power systems significantly. To address these issues, many studies have been carried out to predict wind speed and power. Methods of predicting wind energy are divided into four categories: physical methods, statistical methods, artificial intelligence methods, and hybrid methods. In this study, we proposed a hybrid model using modified LSTM (Long short-term Memory) to predict short-term wind power. The data adopted by modified LSTM use the current observation data (wind power, wind direction, and wind speed) rather than previous data, which are prediction factors of wind power. The performance of modified LSTM was compared among four multivariate models, which are derived from combining the current observation data. Among multivariable models, the proposed hybrid method showed good performance in the initial stage with Model 1 (wind power) and excellent performance in the middle to late stages with Model 3 (wind power, wind speed) in the estimation of short-term wind power. The experiment results showed that the proposed model is more robust and accurate in forecasting short-term wind power than the other models.

Sign in / Sign up

Export Citation Format

Share Document