Effect of a change in the properties of plastic grease in storage in a container and in an article on the reliability of operation of friction units

2010 ◽  
Vol 46 (5) ◽  
pp. 319-327 ◽  
Author(s):  
S. I. Krakhmalev ◽  
V. M. Shkol’nikov ◽  
R. G. Platonova
2020 ◽  
Vol 4 (141) ◽  
pp. 40-46
Author(s):  
ZOYA MISHINA ◽  

Timely conducting of all types of maintenance and routine repairs is possible only in the conditions of an innovative service center, equipped with the necessary equipment and having a complex of facilities to ensure favorable conditions for technical service. (Research purpose) The research purpose is in identifying opportunities for updating the technical service system in the agro-industrial complex by creating innovative service centers to ensure highly efficient operation of agricultural machinery and equipment. (Materials and methods) The system of maintenance in agriculture is characterized by a significant decrease in efficiency due to physical and moral wear of equipment of repair and technical enterprises, low level and insufficient qualification of personnel and managers of enterprises of the agro-industrial complex. The availability of existing enterprises of the agro-industrial complex with production areas is no more than 50 percent, technological equipment is no more than 47 percent, and technological equipment and equipment for jobs are 15 and 40 percent. (Results and discussion) The modernization of the infrastructure of technical service of agricultural machinery is aimed at updating the technological base of machine repair. Repair and technical enterprises do not have the necessary equipment to perform a number of maintenance and routine repairs. The process of developing technical service infrastructure is significantly behind the level of structural and technological complexity of agricultural machinery. Due to technological requirements, complex components and assemblies, such as engines, hydraulic equipment, fuel pumps of domestic and imported agricultural machinery should not be repaired in the conditions of farms. (Conclusions) The high technological level of innovative technical service centers serves as a condition for efficient operation of production, ensuring its stability and reliability of operation, flexibility and adaptability, high intensity and waste-free operation.


Author(s):  
K. D. Khromushkin ◽  
B. G. Ushakov ◽  
A. V. Kochergin ◽  
R. A. Suleev ◽  
O. N. Parmenova

The paper presents experimental data on the study of the friction parameters of hard alloys in sliding friction units, including the heating temperature, surface roughness, wear and friction coefficient, depending on the duration of the test and the friction path.


Author(s):  
Z. N. Mishina

To ensure highly efficient operation of agricultural machinery and equipment, it is necessary to improve the system of technical services in agriculture by creating specialized service centers. The system of maintenance in agriculture is characterized by a significant decrease in efficiency due to critical physical and moral wear of equipment of repair and technical enterprises (RTP), low level and insufficient qualification of Executive personnel and managers of enterprises of the agro-industrial complex (AIC). These changes led to the loss of the majority of RTP for agriculture and their re-equipment for non-agricultural production. According to experts, in the service sectors of agriculture, there was a loss of technological production and a significant part of applied science. This is especially worrisome due to the catastrophic aging of cars and the lack of funds to replace them. It is necessary to improve the General condition of the equipment of repair shops, the availability of existing agricultural enterprises with production areas is no more than 50%, technological equipment — no more than 47%, and technological equipment and equipment of workplaces — 15% — 40%, respectively. The priority areas of modernization of the infrastructure of technical service of agricultural machinery are related to updating the technological base of machine repair. Based on a reliable assessment and analysis of the technological level of RTP, which takes into account a number of technological, technical, organizational and environmental factors of production. RTP does not have the necessary equipment and devices to perform a number of maintenance and maintenance operations. The process of developing the technical service infrastructure lags far behind the level of structural and technological complexity of agricultural machinery. Due to technological requirements, such complex components and assemblies as engines, hydraulic equipment, fuel pumps of domestic and imported agricultural machinery should not be repaired in the conditions of farms. In a number of works proved the following provision: evaluation of the technological level repair enterprises shall be based on the application of such methods and means of technological preparation of production, which correspond to the advanced achievements of science and technology, and provide high-capacity system maintenance to continuous improvement. A high technological level of technical service enterprises is a condition for efficient operation of any type of production, ensuring its stability and reliability of operation, flexibility and adaptability, high intensity and waste-free operation.


2021 ◽  
Vol 04 (1) ◽  
pp. 54-54
Author(s):  
V. R. Nigmatullin ◽  
◽  
I. R. Nigmatullin ◽  
R. G. Nigmatullin ◽  
A.M. Migranov ◽  
...  

Currently, to increase the efficiency of industrial production, high-performance and expensive technological equipment is increasingly used, in which the weakest link, from the point of view of efficiency and reliability, is the components and parts of heavily loaded tribo – couplings operating both at significantly different temperatures (conditionally under lighter conditions, the temperature difference can be 100-120 degrees) and climatic conditions (high humidity, the presence of abrasives and other chemical elements in the atmosphere). As the results of the analysis of the frequency of failures of friction units and, accordingly, the cost of their restoration reach 9-20 percent of the cost of all equipment, without taking into account significant losses of income (profit) of the enterprise from downtime. The solution of this problem is based on the study of the wear rate of friction units by the wear products accumulated in working oils, cooling lubricants, and greases. A digital equipment monitoring system (DSMT) has been developed and implemented, which includes dynamic recording of the number of wear products and oil temperature by original modern recording devices, followed by the technology of their processing and use. The system also includes methods for finding the necessary information in large data sets useful and necessary in theoretical and practical terms with a similar technique controlled by a digital monitoring system. The advantages of SMT are the ability to predict the reliability of the equipment; reduce production risks and significantly reduce inefficient costs.


Sign in / Sign up

Export Citation Format

Share Document