Effect of intake manifold design on the mixing of air and bio-CNG in a port-injected dual fuel diesel engine

2020 ◽  
Vol 141 (6) ◽  
pp. 2295-2309
Author(s):  
Akash Chandrabhan Chandekar ◽  
Biplab Kumar Debnath
Keyword(s):  
Diesel Engine ◽  
Intake Manifold ◽  
Dual Fuel

Control Strategy and Realization of Dual Fuel Engine with Intake Premixed Methanol on Turbocharging Diesel Engine

2012 ◽  
Vol 614-615 ◽  
pp. 436-440
Author(s):  
Jia Yi Du ◽  
Hai Ling Li ◽  
Deng Pan Zhang ◽  
Yong Jia Lu
Keyword(s):  
Diesel Engine ◽  
Control Strategy ◽  
Interpolation Method ◽  
Intake Manifold ◽  
Bench Test ◽  
Dual Fuel ◽  
Operation Conditions ◽  
Di Diesel Engine ◽  
Table Data ◽  
Intake Manifold Pressure

Based on Methanol and diesel special combustion mode, a control strategy of methanol/diesel dual fuel engine on turbocharged DI diesel engine was introduced according to different operation conditions. A method of judging engine load by measuring intake manifold pressure was put forward. Bicubic interpolation method was adopted to optimize the control MAP for ensuring the coincidence between look-up table data and actual conditions. The feasibility of the control strategy is verified by bench test. And the results of test show that the economic performance of this dual fuel engine got a considerable improvement.

Effect of Water Injection in Acetylene-Diesel Dual Fuel DI Diesel Engine

2012 ◽  
Author(s):  
T. Lakshmanan ◽  
A. Khadeer Ahmed ◽  
G. Nagarajan
Keyword(s):  
Diesel Engine ◽  
Thermal Efficiency ◽  
Alternative Fuels ◽  
Gas Flow ◽  
Water Injection ◽  
Intake Manifold ◽  
Dual Fuel ◽  
Intake Port ◽  
Gas Temperature ◽  
Brake Thermal Efficiency

Gaseous fuels are good alternative fuels to improve the energy crisis of today’s situation due to its clean burning characteristics. However, the incidence of backfire and knock remains a significant barrier in commercialization. With the invention of latest technology, the above barriers are eliminated. One such technique is timed injection of water into the intake port. In the present investigation, acetylene was aspirated in the intake manifold of a single cylinder diesel engine, with a gas flow rate of 390 g/h, along with water injected in the intake port, to overcome the backfire and knock problems in gaseous dual fuel engine. The brake thermal efficiency and emissions such as NOx, smoke, CO, HC, CO2 and exhaust gas temperature were studied. Dual fuel operation of acetylene induction with injection of water results in lowered NOx emissions with complete elimination of backfire and knock at the expense of brake thermal efficiency.

Cyclic Variability in Diesel/Gasoline Dual-Fuel Combustion on a Medium-Duty Diesel Engine

2013 ◽  
Author(s):  
Jiafeng Sun ◽  
Joshua A. Bittle ◽  
Timothy J. Jacobs
Keyword(s):  
Diesel Engine ◽  
Heat Release ◽  
Gasoline Fraction ◽  
Fuel Spray ◽  
Intake Manifold ◽  
Dual Fuel ◽  
Injection Timing ◽  
Fuel Injector ◽  
Cyclic Variability ◽  
Diesel Operation

Most studies comparing diesel/gasoline dual-fuel operation and single-fuel diesel operation in diesel engines center on time-averaged results. It seems few studies discuss differences in cyclic variability. Motivated by this, the present study evaluates the cyclic variability of combustion in both dual-fuel and single-fuel operations of a diesel engine. Steady-state tests were done on a medium duty diesel engine with conventional direct injection timings of diesel fuel into the cylinder at one speed and three loads. In addition to single-fuel (diesel) operation, dual-fuel (gasoline and diesel) operation was studied at increasing levels of gasoline fraction. Gasoline fuel is introduced via a fuel injector at a single location prior to the intake manifold (and EGR mixing location). Crank-angle resolved data including in-cylinder pressure and heat release rate obtained for around 150 consecutive cycles are used to assess cyclic variability. The sources of cyclic variability, namely the factors causing cyclic variability or influencing its magnitude, especially those related to cylinder charge amount and mixture preparation, are analyzed. Fuel spray penetration and cyclic variability of cylinder charging, overall A/F ratio, and fuel injection timing, tend to increase cyclic variability of combustion in dual-fuel operation. On the other hand, fuel type and fuel spray droplet size tend to increase cyclic variability in single-fuel operation. The cyclic variability in dual-fuel operation in this study is more serious than that in single-fuel operation, in terms of magnitude, indicated by metrics chosen to quantify it. Most measures of cyclic variability increase consistently with increasing gasoline fraction. Variations of gasoline amount and possibly gasoline low temperature heat release cause higher combustion variation in dual-fuel operation primarily by affecting premixed burning. Statistical methods such as probability density function, autocorrelation coefficient, return map, and symbol sequence statistics methods are used to check determinism. In general, the parameters studied do not show strong determinism, which suggests other parameters must be identified to establish determinism or the system is inherently stochastic. Regardless, dominant sequences and optimal sequence lengths can be identified.

Hydrogen Gas in Diesel Engine Using DEE as Ignition Source

2014 ◽  
Vol 591 ◽  
pp. 150-154 ◽  
Author(s):  
C. Dhanasekaran ◽  
G. Mohankumar
Keyword(s):  
Diesel Engine ◽  
Alternative Fuels ◽  
Driving Forces ◽  
Petroleum Products ◽  
Hydrogen Gas ◽  
Ignition Source ◽  
Intake Manifold ◽  
Dual Fuel ◽  
Hydrogen Flow ◽  
Carbon Based

Over the past two decades considerable effort has been taken to develop and introduce new alternate source of energy for the conventional gasoline and diesel. Environmental pollution and uncertainty in cost of petroleum products are the principal driving forces for this movement. The major pollutants from an Diesel engine system are NOx, Smoke, particulate matter, Soot. Several alternative fuels were tried but all of them are carbon based fuels, therefore net carbon based pollutants cannot be reduced. One alternative to carbon-based fuels is hydrogen. Hydrogen a non-carbon fuel only can meet zero emission vehicles standards in future. Hydrogen can be commercially used as a fuel even though it is having a number of technical and economical barriers. Numerous techniques are available for use in C.I. engine such as dual fuel made, by using spark plug, glow plug, DEE as an ignition enhancer. Hydrogen was used in a diesel engine in the dual fuel mode-using diesel as an ignition source in neat form using DEE. In neat form the DEE was introduced in the manifold. In order to have a precise control of hydrogen flow and to avoid the backfire and pre – ignition problems hydrogen was injection in to intake manifold; DEE injection follows the hydrogen injection. DEE mixed with air and flows into the combustion chamber as DEE auto ignites first followed by hydrogen combustion. A single cylinder-four stroke water-cooled naturally aspirated constant speed D.I. diesel engine with a rated output of 3.7 kW at 1500 rpm was used for the experimental purpose. Measurements were taken with respect to the performance, combustion and emission studies.

Effects of Compressed Natural Gas (CNG) Injector Position on Intake Manifold towards Diesel-CNG Dual Fuel (DDF) Engine Performance

2014 ◽  
Vol 70 (1) ◽  
Author(s):  
A. Supee ◽  
R. Mohsin ◽  
Z. A. Majid ◽  
M. I. Raiz
Keyword(s):  
Diesel Engine ◽  
Kinetic Energy ◽  
Natural Gas ◽  
Diesel Fuel ◽  
Engine Performance ◽  
Intake Manifold ◽  
Dual Fuel ◽  
Exhaust Gas ◽  
Compressed Natural Gas ◽  
Exhaust Gas Emissions

In Diesel-CNG (Compressed Natural Gas) Dual Fuel (DDF) system, CNG is generally inducted in the intake manifold by CNG injector which is mounted on the intake manifold whereas diesel fuel is directly injected into engine cylinder using existing diesel fuel injector system. Status quo of optimum CNG injector position on intake manifold will  provide better gaseous fuel mixing quality, produce high turbulence kinetic energy and thus improve the performance of the diesel engine under DDF system. Thus, under full load condition at 2750 rpm, the engine performance and exhaust gas emissions tests such as nitric oxides (NOx), carbon dioxide (CO2), carbon monoxide (CO) and hydrocarbon (HC) were conducted on a diesel engine under DDF system for optimization of CNG injector position. Four CNG injector position on intake manifold were selected and optimum position of CNG injector was found to be at "position 2" which results in higher power output and less exhaust gas emissions. Further analysis by Computational Fluid Dynamics (CFD) shows that CNG injector at "position 2" exhibit better quality of homogeneous CNG-air mixture and higher turbulence kinetic energy compared to other position. Based on the findings, an optimization of CNG injector position on intake manifold provide promising modification method due to the simple, cheaper and commercially acceptable.

scholarly journals Investigation of the Performance and Emission Characteristics of Diesel Engine Fueled with Biogas-Diesel Dual Fuel

Fuels ◽  
2022 ◽  
Vol 3 (1) ◽  
pp. 15-30
Author(s):  
Melkamu Genet Leykun ◽  
Menelik Walle Mekonen
Keyword(s):  
Diesel Engine ◽  
Fossil Fuel ◽  
Intake Manifold ◽  
Dual Fuel ◽  
Replacement Ratio ◽  
Engine Load ◽  
Performance And Emission ◽  
Di Diesel Engine ◽  
Biogas Energy ◽  
Energy Share

Due to the popularity of diesel engines, utilization of fossil fuel has increased. However, fossil fuel resources are depleting and their prices are increasing day by day. Additionally, the emissions from the burning of petroleum-derived fuel is harming the global environment. This work covers the performance and emission parameters of a biogas-diesel dual-fuel mode diesel engine and compared them to baseline diesel. The experiment was conducted on a single-cylinder and four-stroke DI diesel engine with a maximum power output of 2.2 kW by varying engine load at a constant speed of 1500 RPM. The diesel was injected as factory setup, whereas biogas mixes with air and then delivered to the combustion chamber through intake manifold at various flow rates of 2, 4, and 6 L/min. At 2 L/min flow rate of biogas, the results were found to have better performance and lower emission, than that of the other flow; with an average reduction in BTE, HC, and NOx by 11.19, 0.52, and 19.91%, respectively, and an average increment in BSFC, CO, and CO2 by 11.81, 1.05, and 12.8%, respectively, as compared to diesel. The diesel replacement ratio was varied from 19.56 to 7.61% at zero engine load and 80% engine load with biogas energy share of 39.6 and 16.59%, respectively.

Thermochemical and Sensible Energy Recuperation Using Thermally-Integrated Reactor and Diesel-Ammonia Dual Fueling Strategy

2019 ◽  
Author(s):  
Seamus P. Kane ◽  
Darrick Zarling ◽  
William F. Northrop
Keyword(s):  
Diesel Engine ◽  
Fossil Fuels ◽  
Waste Heat ◽  
Combustion Efficiency ◽  
Hydrogen Gas ◽  
Intake Manifold ◽  
Dual Fuel ◽  
Heating Value ◽  
Anhydrous Ammonia ◽  
Process Engine

Abstract Anhydrous ammonia produced using wind power on farms can be a renewable alternative to conventional fertilizers and to fossil fuels used in engine-powered equipment. Although it has been shown that ammonia can be used in dual fuel modes in diesel engines, its inherently low flame speed results in poor combustion efficiency and thus reduces allowable diesel fuel replacement ratios. In this work, a novel method using a thermochemical recuperation (TCR) reactor system to partially decompose ammonia into hydrogen and nitrogen over a catalyst was demonstrated in diesel engine powered tractor. In the experiments, a John Deere 6400 agricultural tractor powered by a non-EPA tier-certified 4045TL diesel engine was operated in dual-fuel mode using anhydrous ammonia as the secondary fuel. Liquid ammonia from a tank was vaporized and heated using a series of heat exchangers and partially decomposed to hydrogen gas before being fumigated into the intake manifold. The catalytic TCR reactor utilized both exhaust waste heat and unburned hydrocarbon heating value to drive the ammonia decomposition process. Engine emissions and performance data were collected across a standard 8-mode test. The engine was operated using diesel only and in dual fuel mode with up to 42% replacement of diesel with ammonia on a lower heating value basis. Engine loading was accomplished using a power takeoff (PTO) dynamometer. Measured brake thermal efficiency was improved by up to 5.0% using thermochemical recuperation, and brake specific CO2 emissions were reduced by up to 44% over diesel-only rates.

scholarly journals Impact of Biogas and Waste Fats Methyl Esters on NO, NO2, CO, and PM Emission by Dual Fuel Diesel Engine

2019 ◽  
Vol 11 (6) ◽  
pp. 1799 ◽  
Author(s):  
Wojciech Golimowski ◽  
Paweł Krzaczek ◽  
Damian Marcinkowski ◽  
Weronika Gracz ◽  
Grzegorz Wałowski
Keyword(s):  
Diesel Engine ◽  
Diesel Fuel ◽  
Methyl Esters ◽  
Waste Cooking Oil ◽  
Gas Content ◽  
Liquid Fuels ◽  
Intake Manifold ◽  
Dual Fuel ◽  
Variable Load ◽  
Energy Unit

The aim of this study was to perform a comparative analysis of the unit gas emission value in the exhaust of a dual fuel diesel engine. The results of the effects of a diesel engine’s applications in biogas plants and the method for calculating mass gas emissions per unit of produced electricity are shown. The test was performed using a two-cylinder, naturally aspirated, liquid-cooled diesel engine. The diesel engine powered a generator connected to the grid. The engine was fed with liquid fuels—waste cooking oil methyl ester (UCOME) and diesel fuel (DF)—and with a gas fuel, biogas (BG). The engine ran at a constant rotational speed (2000 rpm ± 30 rpm) with variable load. The gas analyzer measured the amount of CO, NO, NO2, and PM (particulate matter) in exhaust gas. This gas content share was then converted to mass per engine generated energy unit. This experiment showed the effect of BG introduced to the intake manifold on fuel combustion, as well as an increase in CO and NO2 emission and decrease in NO and PM. In terms of dependence of exhaust emissions on the type of liquid fuel used, the use of UCOME as opposed to diesel fuel resulted in PM reduction and increase of NO emissions.

RESEARCH OF INDICATORS OF A VEHICLE WITH A DIESEL WORKING ON DIESEL AND DIESEL GAS CYCLES USING THE MATHEMATICAL MODEL

2020 ◽  
pp. 14-19
Author(s):  
Serhii Kovbasenko ◽  
Andriy Holyk ◽  
Serhii Hutarevych
Keyword(s):  
Mathematical Model ◽  
Diesel Engine ◽  
Environmental Performance ◽  
Energy Performance ◽  
Dual Fuel ◽  
Fuel System ◽  
Compressed Natural Gas ◽  
Diesel Vehicles ◽  
Diesel Cycle ◽  
The Mathematical Model

The features of an advanced mathematical model of motion of a truck with a diesel engine operating on the diesel and diesel gas cycles are presented in the article. As a result of calculations using the mathematical model, a decrease in total mass emissions as a result of carbon monoxide emissions is observed due to a decrease in emissions of nitrogen oxides and emissions of soot in the diesel gas cycle compared to the diesel cycle. The mathematical model of a motion of a truck on a city driving cycle according to GOST 20306-90 allows to study the fuel-economic, environmental and energy indicators of a diesel and diesel gas vehicle. The results of the calculations on the mathematical model will make it possible to conclude on the feasibility of converting diesel vehicles to using compressed natural gas. Object of the study – the fuel-economic, environmental and energy performance diesel engine that runs on dual fuel system using CNG. Purpose of the study – study of changes in fuel, economic, environmental and energy performance of vehicles with diesel engines operating on diesel and diesel gas cycles, according to urban driving cycle modes. Method of the study – calculations on a mathematical model and comparison of results with road tests. Bench and road tests, results of calculations on the mathematical model of motion of a truck with diesel, working on diesel and diesel gas cycles, show the improvement of environmental performance of diesel vehicles during the converting to compressed natural gas in operation. Improvement of environmental performance is obtained mainly through the reduction of soot emissions and nitrogen oxides emissions from diesel gas cycle operations compared to diesel cycle operations. The results of the article can be used to further develop dual fuel system using CNG. Keywords: diesel engine, diesel gas engine, CNG

Sign in / Sign up

Export Citation Format

Share Document