Determination of the optimal form and dimension of the marker of a digital autocollimator

2011 ◽  
Vol 54 (5) ◽  
pp. 505-510
Author(s):  
E. N. Kharitonova
2017 ◽  
Vol 21 (1) ◽  
pp. 47-57
Author(s):  
Edmund Kamiński ◽  
Victor Iofimovich Kocuba ◽  
Maciej Kuboń ◽  
Vjacheslav Sharshunov

Abstract The object of the research consisted of a roller threshing unit with a profile elastic working surface of a parabolic type and a triangle one with rollers which turn concurrently with various angular speeds. Two rollers with 150 and 300 mm were investigated. The process of seeds separation from the threshing mass took place at its moisture of 10 to 35%. The relation of mixtures in the straw mass in a mass relation was changing within 10 to 35% with the length of stalks from 20 to 400 mm. The amount of the material provided for threshing was varied from 0.27 to 0.52 kg∙s-1∙m-1 and the slot between the rollers from 1.0 to 6.0 mm. The width of the base of notches located on the working surface of drums was within 25 to 150 mm, the height of notches on rollers was within 10 to 60 mm. Kinematic conditions of rollers operation were within 1.0 to 1.5. As a result of the research it was determined that a parabola is the optimal form of the profiled surface of rollers in a cross section. It ensures more effective seeds separation than a triangle configuration of drums. This conclusion is also confirmed by a theoretical discussion and is explained with the fact that the parabolic form of notches has a bigger surface than the triangle one and that they affect more seed-bags which leads to the increase of the seeds separation degree. The laboratory research allowed determination of rational ranges of parameters changes during flax mass threshing.


2014 ◽  
Vol 988 ◽  
pp. 367-370
Author(s):  
Leonid U. Stupishin ◽  
Sergey Emelyanov ◽  
Maksim U. Pereverzev ◽  
Maria L. Moshkevich

An important aspect of the theory of optimal design of shells is a question technology of determination of optimal forms of shells with numerical methods, based on the variation definitions. The distribution of effort in sloping shell of revolution optimal form, uniformly loaded with despens intensity is analyzed. The mathematical model of shell optimal form is based on the maximum principle of L.S. Pontryagin. The solution of the objective is numerically made in MathCad. The relations of the distribution of the longitudinal forces and moments along the radius of the shell is shown.


2018 ◽  
Vol 19 (3) ◽  
pp. 179-190
Author(s):  
M. V. Skorobogatova ◽  
L. V. Arshinsky ◽  
A. V. Daneev ◽  
S. I. Noskov ◽  
V. N. Sizykh

1966 ◽  
Vol 25 ◽  
pp. 93-97
Author(s):  
Richard Woolley

It is now possible to determine proper motions of high-velocity objects in such a way as to obtain with some accuracy the velocity vector relevant to the Sun. If a potential field of the Galaxy is assumed, one can compute an actual orbit. A determination of the velocity of the globular clusterωCentauri has recently been completed at Greenwich, and it is found that the orbit is strongly retrograde in the Galaxy. Similar calculations may be made, though with less certainty, in the case of RR Lyrae variable stars.


1999 ◽  
Vol 190 ◽  
pp. 549-554
Author(s):  
Nino Panagia

Using the new reductions of the IUE light curves by Sonneborn et al. (1997) and an extensive set of HST images of SN 1987A we have repeated and improved Panagia et al. (1991) analysis to obtain a better determination of the distance to the supernova. In this way we have derived an absolute size of the ringRabs= (6.23 ± 0.08) x 1017cm and an angular sizeR″ = 808 ± 17 mas, which give a distance to the supernovad(SN1987A) = 51.4 ± 1.2 kpc and a distance modulusm–M(SN1987A) = 18.55 ± 0.05. Allowing for a displacement of SN 1987A position relative to the LMC center, the distance to the barycenter of the Large Magellanic Cloud is also estimated to bed(LMC) = 52.0±1.3 kpc, which corresponds to a distance modulus ofm–M(LMC) = 18.58±0.05.


1961 ◽  
Vol 13 ◽  
pp. 29-41
Author(s):  
Wm. Markowitz
Keyword(s):  

A symposium on the future of the International Latitude Service (I. L. S.) is to be held in Helsinki in July 1960. My report for the symposium consists of two parts. Part I, denoded (Mk I) was published [1] earlier in 1960 under the title “Latitude and Longitude, and the Secular Motion of the Pole”. Part II is the present paper, denoded (Mk II).


1972 ◽  
Vol 1 ◽  
pp. 27-38
Author(s):  
J. Hers

In South Africa the modern outlook towards time may be said to have started in 1948. Both the two major observatories, The Royal Observatory in Cape Town and the Union Observatory (now known as the Republic Observatory) in Johannesburg had, of course, been involved in the astronomical determination of time almost from their inception, and the Johannesburg Observatory has been responsible for the official time of South Africa since 1908. However the pendulum clocks then in use could not be relied on to provide an accuracy better than about 1/10 second, which was of the same order as that of the astronomical observations. It is doubtful if much use was made of even this limited accuracy outside the two observatories, and although there may – occasionally have been a demand for more accurate time, it was certainly not voiced.


2000 ◽  
Vol 179 ◽  
pp. 205-208
Author(s):  
Pavel Ambrož ◽  
Alfred Schroll

AbstractPrecise measurements of heliographic position of solar filaments were used for determination of the proper motion of solar filaments on the time-scale of days. The filaments have a tendency to make a shaking or waving of the external structure and to make a general movement of whole filament body, coinciding with the transport of the magnetic flux in the photosphere. The velocity scatter of individual measured points is about one order higher than the accuracy of measurements.


1975 ◽  
Vol 26 ◽  
pp. 341-380 ◽  
Author(s):  
R. J. Anderle ◽  
M. C. Tanenbaum

AbstractObservations of artificial earth satellites provide a means of establishing an.origin, orientation, scale and control points for a coordinate system. Neither existing data nor future data are likely to provide significant information on the .001 angle between the axis of angular momentum and axis of rotation. Existing data have provided data to about .01 accuracy on the pole position and to possibly a meter on the origin of the system and for control points. The longitude origin is essentially arbitrary. While these accuracies permit acquisition of useful data on tides and polar motion through dynamio analyses, they are inadequate for determination of crustal motion or significant improvement in polar motion. The limitations arise from gravity, drag and radiation forces on the satellites as well as from instrument errors. Improvements in laser equipment and the launch of the dense LAGEOS satellite in an orbit high enough to suppress significant gravity and drag errors will permit determination of crustal motion and more accurate, higher frequency, polar motion. However, the reference frame for the results is likely to be an average reference frame defined by the observing stations, resulting in significant corrections to be determined for effects of changes in station configuration and data losses.


1979 ◽  
Vol 44 ◽  
pp. 349-355
Author(s):  
R.W. Milkey

The focus of discussion in Working Group 3 was on the Thermodynamic Properties as determined spectroscopically, including the observational techniques and the theoretical modeling of physical processes responsible for the emission spectrum. Recent advances in observational techniques and theoretical concepts make this discussion particularly timely. It is wise to remember that the determination of thermodynamic parameters is not an end in itself and that these are interesting chiefly for what they can tell us about the energetics and mass transport in prominences.


Sign in / Sign up

Export Citation Format

Share Document