Large-scale Motion of Solar Filaments

2000 ◽  
Vol 179 ◽  
pp. 205-208
Author(s):  
Pavel Ambrož ◽  
Alfred Schroll

AbstractPrecise measurements of heliographic position of solar filaments were used for determination of the proper motion of solar filaments on the time-scale of days. The filaments have a tendency to make a shaking or waving of the external structure and to make a general movement of whole filament body, coinciding with the transport of the magnetic flux in the photosphere. The velocity scatter of individual measured points is about one order higher than the accuracy of measurements.

2020 ◽  
Vol 498 (2) ◽  
pp. 2196-2218
Author(s):  
David Specht ◽  
Eamonn Kerins ◽  
Supachai Awiphan ◽  
Annie C Robin

ABSTRACT Galactic microlensing datasets now comprise in excess of 104 events and, with the advent of next-generation microlensing surveys that may be undertaken with facilities such as the Rubin Observatory (formerly LSST) and Roman Space Telescope (formerly WFIRST), this number will increase significantly. So too will the fraction of events with measurable higher order information, such as finite-source effects and lens–source relative proper motion. Analysing such data requires a more sophisticated Galactic microlens modelling approach. We present a new second-generation Manchester–Besançon Microlensing Simulator (MaBμlS-2), which uses a version of the Besançon population synthesis Galactic model that provides good agreement with stellar kinematics observed by the Hubble Space Telescope (HST) towards the bulge. MaBμlS-2 provides high-fidelity signal-to-noise limited maps of the microlensing optical depth, rate and average time-scale towards a 400 deg2 region of the Galactic bulge in several optical to near-infrared pass-bands. The maps take full account of the unresolved stellar background, as well as limb-darkened source profiles. Comparing MaBμlS-2 with the efficiency-corrected OGLE-IV 8000 event sample shows a much improved agreement over the previous version of MaBμlS and succeeds in matching even small-scale structural features in the OGLE-IV event rate map. However, evidence remains for a small underprediction of the event rate per source and overprediction of the time-scale. MaBμlS-2 is available online (www.mabuls.net, Specht & Kerins) to provide on-the-fly maps for user-supplied cuts in survey magnitude, event time-scale and relative proper motion.


2013 ◽  
Vol 8 (S300) ◽  
pp. 445-446 ◽  
Author(s):  
Duncan H Mackay ◽  
Victor Gaizauskas ◽  
Anthony R. Yeates

AbstractIn the present study, we consider where large, stable solar filaments form relative to underlying magnetic polarities. We find that 92% of all large stable filaments form in magnetic configurations involving the interaction of two or more bipoles. Only 7% form above the Polarity Inversion Line (PIL) of a single bipole. This indicates that a key element in the formation of large-scale stable filaments is the convergence of magnetic flux, resulting in either flux cancellation or coronal reconnection.


1988 ◽  
Vol 64 (1-3) ◽  
pp. 277-283
Author(s):  
A. S. Szalay ◽  
E. Regős

2000 ◽  
Vol 21 (3-4) ◽  
pp. 205-208 ◽  
Author(s):  
Pavel Ambrož ◽  
Alfred Schroll

2000 ◽  
Vol 179 ◽  
pp. 177-183
Author(s):  
D. M. Rust

AbstractSolar filaments are discussed in terms of two contrasting paradigms. The standard paradigm is that filaments are formed by condensation of coronal plasma into magnetic fields that are twisted or dimpled as a consequence of motions of the fields’ sources in the photosphere. According to a new paradigm, filaments form in rising, twisted flux ropes and are a necessary intermediate stage in the transfer to interplanetary space of dynamo-generated magnetic flux. It is argued that the accumulation of magnetic helicity in filaments and their coronal surroundings leads to filament eruptions and coronal mass ejections. These ejections relieve the Sun of the flux generated by the dynamo and make way for the flux of the next cycle.


2018 ◽  
Vol 68 (12) ◽  
pp. 2857-2859
Author(s):  
Cristina Mihaela Ghiciuc ◽  
Andreea Silvana Szalontay ◽  
Luminita Radulescu ◽  
Sebastian Cozma ◽  
Catalina Elena Lupusoru ◽  
...  

There is an increasing interest in the analysis of salivary biomarkers for medical practice. The objective of this article was to identify the specificity and sensitivity of quantification methods used in biosensors or portable devices for the determination of salivary cortisol and salivary a-amylase. There are no biosensors and portable devices for salivary amylase and cortisol that are used on a large scale in clinical studies. These devices would be useful in assessing more real-time psychological research in the future.


2019 ◽  
Vol 22 (5) ◽  
pp. 346-354
Author(s):  
Yan A. Ivanenkov ◽  
Renat S. Yamidanov ◽  
Ilya A. Osterman ◽  
Petr V. Sergiev ◽  
Vladimir A. Aladinskiy ◽  
...  

Aim and Objective: Antibiotic resistance is a serious constraint to the development of new effective antibacterials. Therefore, the discovery of the new antibacterials remains one of the main challenges in modern medicinal chemistry. This study was undertaken to identify novel molecules with antibacterial activity. Materials and Methods: Using our unique double-reporter system, in-house large-scale HTS campaign was conducted for the identification of antibacterial potency of small-molecule compounds. The construction allows us to visually assess the underlying mechanism of action. After the initial HTS and rescreen procedure, luciferase assay, C14-test, determination of MIC value and PrestoBlue test were carried out. Results: HTS rounds and rescreen campaign have revealed the antibacterial activity of a series of Nsubstituted triazolo-azetidines and their isosteric derivatives that has not been reported previously. Primary hit-molecule demonstrated a MIC value of 12.5 µg/mL against E. coli Δ tolC with signs of translation blockage and no SOS-response. Translation inhibition (26%, luciferase assay) was achieved at high concentrations up to 160 µg/mL, while no activity was found using C14-test. The compound did not demonstrate cytotoxicity in the PrestoBlue assay against a panel of eukaryotic cells. Within a series of direct structural analogues bearing the same or bioisosteric scaffold, compound 2 was found to have an improved antibacterial potency (MIC=6.25 µg/mL) close to Erythromycin (MIC=2.5-5 µg/mL) against the same strain. In contrast to the parent hit, this compound was more active and selective, and provided a robust IP position. Conclusion: N-substituted triazolo-azetidine scaffold may be used as a versatile starting point for the development of novel active and selective antibacterial compounds.


Water ◽  
2021 ◽  
Vol 13 (3) ◽  
pp. 248
Author(s):  
Sencer Yücesan ◽  
Daniel Wildt ◽  
Philipp Gmeiner ◽  
Johannes Schobesberger ◽  
Christoph Hauer ◽  
...  

A systematic variation of the exposure level of a spherical particle in an array of multiple spheres in a high Reynolds number turbulent open-channel flow regime was investigated while using the Large Eddy Simulation method. Our numerical study analysed hydrodynamic conditions of a sediment particle based on three different channel configurations, from full exposure to zero exposure level. Premultiplied spectrum analysis revealed that the effect of very-large-scale motion of coherent structures on the lift force on a fully exposed particle resulted in a bi-modal distribution with a weak low wave number and a local maximum of a high wave number. Lower exposure levels were found to exhibit a uni-modal distribution.


2021 ◽  
Vol 17 (4) ◽  
pp. 1-21
Author(s):  
He Wang ◽  
Nicoleta Cucu Laurenciu ◽  
Yande Jiang ◽  
Sorin Cotofana

Design and implementation of artificial neuromorphic systems able to provide brain akin computation and/or bio-compatible interfacing ability are crucial for understanding the human brain’s complex functionality and unleashing brain-inspired computation’s full potential. To this end, the realization of energy-efficient, low-area, and bio-compatible artificial synapses, which sustain the signal transmission between neurons, is of particular interest for any large-scale neuromorphic system. Graphene is a prime candidate material with excellent electronic properties, atomic dimensions, and low-energy envelope perspectives, which was already proven effective for logic gates implementations. Furthermore, distinct from any other materials used in current artificial synapse implementations, graphene is biocompatible, which offers perspectives for neural interfaces. In view of this, we investigate the feasibility of graphene-based synapses to emulate various synaptic plasticity behaviors and look into their potential area and energy consumption for large-scale implementations. In this article, we propose a generic graphene-based synapse structure, which can emulate the fundamental synaptic functionalities, i.e., Spike-Timing-Dependent Plasticity (STDP) and Long-Term Plasticity . Additionally, the graphene synapse is programable by means of back-gate bias voltage and can exhibit both excitatory or inhibitory behavior. We investigate its capability to obtain different potentiation/depression time scale for STDP with identical synaptic weight change amplitude when the input spike duration varies. Our simulation results, for various synaptic plasticities, indicate that a maximum 30% synaptic weight change and potentiation/depression time scale range from [-1.5 ms, 1.1 ms to [-32.2 ms, 24.1 ms] are achievable. We further explore the effect of our proposal at the Spiking Neural Network (SNN) level by performing NEST-based simulations of a small SNN implemented with 5 leaky-integrate-and-fire neurons connected via graphene-based synapses. Our experiments indicate that the number of SNN firing events exhibits a strong connection with the synaptic plasticity type, and monotonously varies with respect to the input spike frequency. Moreover, for graphene-based Hebbian STDP and spike duration of 20ms we obtain an SNN behavior relatively similar with the one provided by the same SNN with biological STDP. The proposed graphene-based synapse requires a small area (max. 30 nm 2 ), operates at low voltage (200 mV), and can emulate various plasticity types, which makes it an outstanding candidate for implementing large-scale brain-inspired computation systems.


Sign in / Sign up

Export Citation Format

Share Document