scholarly journals Sewage Flow Conditions in a Hydroponic Lagoon in Terms of Quality of Treated Wastewater

2021 ◽  
Vol 232 (7) ◽  
Author(s):  
K. Marek ◽  
K. Pawęska ◽  
A. Bawiec ◽  
J. Baran
Keyword(s):  
Wastewater Treatment ◽  
Cross Sections ◽  
Suspended Solids ◽  
Municipal Wastewater ◽  
Pollutant Removal ◽  
Treated Wastewater ◽  
Municipal Wastewater Treatment ◽  
Flow Conditions ◽  
Wastewater Samples ◽  
The Impact

AbstractThe aim of this study was to analyse the impact of velocity in the hydroponic lagoon used as the 3rd stage of municipal wastewater treatment on washing out of the particles suspended in the sewage as well as settled on the bottom of the hydroponic ditch. In order to analyse the flow velocity in the lagoon, 12 cross-sections were determined at points where the speed and motion of particles can change. Wastewater samples were taken in the summer month from each of the 12 sampling points (the depth of 0.1 m) and the basic physicochemical parameters of sewage were determined (BOD5, COD, TOC, TSS, turbidity). In selected cross-sections, a granulometric analysis of particles was made to determine the characteristics of suspended solids in the wastewater flow path. Based on the analysis, it was found that velocities in the lagoon during aeration can be ten times higher (0.070 m·s−1) than those assumed by designers (0.006 m·s−1). Such a large difference means that the sedimentation conditions assumed in the project cannot be met, which may result in an increase in the total suspended solids and organic matter concentrations at the outflow to the receiving water body. During the flow through the hydroponic ditch, the highest efficiency of pollutant removal was indicated for BOD5 — 88.7% and TSS — 80%, while the COD removal occurred with the lowest efficiency — 34.1%. Improving flow conditions as designed in the hydroponic lagoon technological project may increase the efficiency of wastewater treatment at the third stage of treatment.

scholarly journals Assessment of Microplastics in a Municipal Wastewater Treatment Plant with Tertiary Treatment: Removal Efficiencies and Loading per Day into the Environment

Water ◽  
2021 ◽  
Vol 13 (10) ◽  
pp. 1339
Author(s):  
Javier Bayo ◽  
Sonia Olmos ◽  
Joaquín López-Castellanos
Keyword(s):  
Wastewater Treatment ◽  
Wastewater Treatment Plant ◽  
Municipal Wastewater ◽  
Removal Rate ◽  
Treatment Plant ◽  
Source Control ◽  
Municipal Wastewater Treatment ◽  
Tertiary Treatment ◽  
Stable Performance ◽  
Wastewater Samples

This study investigates the removal of microplastics from wastewater in an urban wastewater treatment plant located in Southeast Spain, including an oxidation ditch, rapid sand filtration, and ultraviolet disinfection. A total of 146.73 L of wastewater samples from influent and effluent were processed, following a density separation methodology, visual classification under a stereomicroscope, and FTIR analysis for polymer identification. Microplastics proved to be 72.41% of total microparticles collected, with a global removal rate of 64.26% after the tertiary treatment and within the average retention for European WWTPs. Three different shapes were identified: i.e., microfiber (79.65%), film (11.26%), and fragment (9.09%), without the identification of microbeads despite the proximity to a plastic compounding factory. Fibers were less efficiently removed (56.16%) than particulate microplastics (90.03%), suggesting that tertiary treatments clearly discriminate between forms, and reporting a daily emission of 1.6 × 107 microplastics to the environment. Year variability in microplastic burden was cushioned at the effluent, reporting a stable performance of the sewage plant. Eight different polymer families were identified, LDPE film being the most abundant form, with 10 different colors and sizes mainly between 1–2 mm. Future efforts should be dedicated to source control, plastic waste management, improvement of legislation, and specific microplastic-targeted treatment units, especially for microfiber removal.

Area-based speciation kinetic analysis of the multipollutant removal in Constructed Wetlands to enhance its treatment efficiency

2021 ◽  
Author(s):  
Manoj Kumar ◽  
Rajesh Singh
Keyword(s):  
Wastewater Treatment ◽  
Kinetic Analysis ◽  
Constructed Wetlands ◽  
Municipal Wastewater ◽  
Zero Order ◽  
Pollutant Removal ◽  
Municipal Wastewater Treatment ◽  
Treatment Efficiency ◽  
First Order ◽  
Present Study Area

In the present study area-based, pollutant removal kinetic analysis was considered using the Zero-order, first-order decay and efficiency loss (EL) models in the constructed wetlands (CWs) for municipal wastewater treatment....

Impact of a wastewater treatment plant on Cryptosporidium oocysts and Giardia cysts occurring in a surface water

2000 ◽  
Vol 41 (7) ◽  
pp. 31-37 ◽  
Author(s):  
E. Carraro ◽  
E. Fea ◽  
S. Salva ◽  
G. Gilli
Keyword(s):  
Wastewater Treatment ◽  
Wastewater Treatment Plant ◽  
Municipal Wastewater ◽  
Treatment Plant ◽  
Municipal Wastewater Treatment ◽  
Mean Values ◽  
Cryptosporidium Oocysts ◽  
The Impact ◽  
Receiving Water ◽  
Giardia Cysts

The aim of this study was to assess the impact of a municipal wastewater treatment plant (MWTP) on the occurrence of Cryptosporidium oocysts and Giardia cysts in the receiving water. All MWTP effluent samples were Giardia and Cryptosporidium contaminated, although low mean values were found for both parasites (0.21±0.06 oocysts/L; 1.39±0.51 cysts/L). Otherwise, in the raw sewage a greater concentration was detected (4.5±0.3 oocysts/L; 53.6±6.8 cysts/L). The major occurrence of Giardia over Cryptosporidium, both in the influent and in the effluent of the MWTP, is probably related to the human sewage contribution to the wastewater. Data on protozoa contamination of the receiving water body demonstrated similar concentrations in the samples collected before (0.21±0.07 oocysts/L; 1.31±0.38 cysts/L) and after (0.17±0.09 oocysts/L and 1.01±1.05 cysts/L) the plant effluent discharge. The results of this study suggest that the MWTP has no impact related to Giardia and Cryptosporidium river water contamination, and underline the need for investigation into the effectiveness of these protozoa removal by less technologically advanced MWTPs which are the most widespread and could probably show a lower ability to reduce protozoa.

A proposed sustainable BNR plant with the emphasis on recovery of COD and phosphate

2003 ◽  
Vol 48 (1) ◽  
pp. 77-85 ◽  
Author(s):  
X.-D. Hao ◽  
M.C.M. van Loosdrecht
Keyword(s):  
Wastewater Treatment ◽  
Municipal Wastewater ◽  
Water Environment ◽  
Pilot Scale ◽  
Ammonium Oxidation ◽  
Municipal Wastewater Treatment ◽  
Nitrogen And Phosphorus ◽  
Water Problems ◽  
Sustainable Wastewater Treatment ◽  
The Impact

Water problems have to be solved in an integrated way, and sustainability has become a major issue. For this reason, developing more sustainable wastewater treatment processes is needed. New discoveries and good understanding on microbial conversions of nitrogen and phosphorus make more sustainable processes possible. New options for decentralized sustainable sanitation are generally compared to conventional sewage systems, we think that for a proper comparison also innovative centralized treatment schemes should be evaluated. In this article, a more sustainable WWTP is proposed for municipal wastewater treatment, mainly based on the principles of denitrifying dephosphatation and anaerobic ammonium oxidation (ANAMMOX). The proposed system consists of a first stage of the A/B process in which maximal sludge production is achieved. In this way, COD is regained as sludge for methanation. The following BCFS® and CANON processes can remove N and P with minimal or no COD need. As a potential fertiliser, struvite can easily be removed from the sludge water by adding magnesium compounds. A case study is done on the basis of the mass balance over the proposed plant. The effluent from the system has a good quality to be recycled. This could also make a contribution to meeting the world's water needs and lessening the impact on the world's water environment. Since all the separate units are already applied or tested on pilot-scale, no problems for technical implementation are foreseen.

scholarly journals Efficiency of municipal wastewater treatment with membrane bioreactor

2019 ◽  
Vol 41 (1) ◽  
pp. 47-54
Author(s):  
Magdalena Domańska ◽  
Anna Boral ◽  
Kamila Hamal ◽  
Magdalena Kuśnierz ◽  
Janusz Łomotowski ◽  
...  
Keyword(s):  
Wastewater Treatment ◽  
Membrane Filtration ◽  
Municipal Wastewater ◽  
High Efficiency ◽  
Biological Membrane ◽  
Treatment Plant ◽  
Membrane Reactors ◽  
Quality Analysis ◽  
Treated Wastewater ◽  
Municipal Wastewater Treatment

AbstractThe increasingly stringent requirements for wastewater treatment enforce the adoption of technologies that reduce pollution and minimize waste production. By combining the typical activated sludge process with membrane filtration, biological membrane reactors (MBR) offer great technological potential in this respect. The paper presents the principles and effectiveness of using an MBR at the Głogów Małopolski operation. Physicochemical tests of raw and treated wastewater as well as microscopic analyses with the use of the FISH (fluorescence in situ hybridization) method were carried out. Moreover, the level of electric energy consumption during the operation of the wastewater treatment plant and problems related to fouling were also discussed. A wastewater quality analysis confirmed the high efficiency of removing organic impurities (on average 96% in case of BOD5 and 94% in case of COD) and suspension (on average 93%).

scholarly journals Bio-Methanol Production Using Treated Domestic Wastewater with Mixed Methanotroph Species and Anaerobic Digester Biogas

Water ◽  
2018 ◽  
Vol 10 (10) ◽  
pp. 1414 ◽  
Author(s):  
I-Tae Kim ◽  
Young-Seok Yoo ◽  
Young-Han Yoon ◽  
Ye-Eun Lee ◽  
Jun-Ho Jo ◽  
...  
Keyword(s):  
Wastewater Treatment ◽  
Municipal Wastewater ◽  
Wastewater Treatment Plants ◽  
Cost Effective ◽  
Treated Wastewater ◽  
Culture Solution ◽  
Municipal Wastewater Treatment ◽  
Mineral Salts ◽  
Methanol Production ◽  
Municipal Wastewater Treatment Plants

The development of cost-effective methods, which generate minimal chemical wastewater, for methanol production is an important research goal. In this study, treated wastewater (TWW) was utilized as a culture solution for methanol production by mixed methanotroph species as an alternative to media prepared from commercial or chemical agents, e.g., nitrate mineral salts medium. Furthermore, a realistic alternative for producing methanol in wastewater treatment plants using biogas from anaerobic digestion was proposed. By culturing mixed methanotroph species with nitrate and phosphate-supplemented TWW in municipal wastewater treatment plants, this study demonstrates, for the first time, the application of biogas generated from the sludge digester of municipal wastewater treatment plants. NaCl alone inhibited methanol dehydrogenase and the addition of 40 mM formate as an electron donor increased methanol production to 6.35 mM. These results confirmed that this practical energy production method could enable cost-effective methanol production. As such, methanol produced in wastewater treatment plants can be used as an eco-friendly energy and carbon source for biological denitrification, which can be an alternative to reducing the expenses required for the waste water treatment process.

Occurrence and fate of relevant substances in wastewater treatment plants regarding Water Framework Directive and future legislations

2012 ◽  
Vol 65 (7) ◽  
pp. 1179-1189 ◽  
Author(s):  
S. Martin Ruel ◽  
J.-M. Choubert ◽  
H. Budzinski ◽  
C. Miège ◽  
M. Esperanza ◽  
...  
Keyword(s):  
Wastewater Treatment ◽  
Water Framework Directive ◽  
Municipal Wastewater ◽  
River Flow ◽  
Wastewater Treatment Plants ◽  
Quality Standard ◽  
Treated Wastewater ◽  
Municipal Wastewater Treatment ◽  
Conventional Activated Sludge ◽  
Treatment Processes

The next challenge of wastewater treatment is to reliably remove micropollutants at the microgram per litre range. During the present work more than 100 substances were analysed through on-site mass balances over 19 municipal wastewater treatment lines. The most relevant substances according to their occurrence in raw wastewater, in treated wastewater and in sludge were identified, and their fate in wastewater treatment processes was assessed. About half of priority substances of WFD were found at concentrations higher than 0.1 μg/L in wastewater. For 26 substances, potential non-compliance with Environmental Quality Standard of Water Framework Directive has been identified in treated wastewater, depending on river flow. Main concerns are for Cd, DEHP, diuron, alkylphenols, and chloroform. Emerging substances of particular concern are by-products, organic chemicals (e.g. triclosan, benzothiazole) and pharmaceuticals (e.g. ketoprofen, diclofenac, sulfamethoxazole, carbamazepine). About 80% of the load of micropollutants was removed by conventional activated sludge plants, but about two-thirds of removed substances were mainly transferred to sludge.

scholarly journals Extremophilic Microalgae Galdieria Gen. for Urban Wastewater Treatment: Current State, the Case of “POWER” System, and Future Prospects

Plants ◽  
2021 ◽  
Vol 10 (11) ◽  
pp. 2343
Author(s):  
Maria Rosa di Cicco ◽  
Manuela Iovinella ◽  
Maria Palmieri ◽  
Carmine Lubritto ◽  
Claudia Ciniglia
Keyword(s):  
Wastewater Treatment ◽  
Municipal Wastewater ◽  
Single Step ◽  
Treated Wastewater ◽  
Future Research ◽  
Municipal Wastewater Treatment ◽  
Urban Wastewater ◽  
Current State ◽  
Natural Tolerance ◽  
Urban Wastewater Treatment

Over the past decades, wastewater research has increasingly focused on the use of microalgae as a tool to remove contaminants, entrapping nutrients, and whose biomass could provide both material and energy resources. This review covers the advances in the emerging research on the use in wastewater sector of thermoacidophilic, low-lipid microalgae of the genus Galdieria, which exhibit high content of protein, reserve carbohydrates, and other potentially extractable high-value compounds. The natural tolerance of Galdieria for high toxic environments and hot climates recently made it a key player in a single-step process for municipal wastewater treatment, biomass cultivation and production of energetic compounds using hydrothermal liquefaction. In this system developed in New Mexico, Galdieria proved to be a highly performing organism, able to restore the composition of the effluent to the standards required by the current legislation for the discharge of treated wastewater. Future research efforts should focus on the implementation, in the context of wastewater treatment, of more energetically efficient cultivation systems, potentially capable of generating water with increasingly higher purity levels.

scholarly journals Application of SAC254 measurement for the assessment of micropollutant removal in the adsorptive treatment stage of a municipal wastewater treatment plant

2016 ◽  
Vol 11 (2) ◽  
pp. 503-515 ◽  
Author(s):  
Annette Rößler ◽  
Steffen Metzger
Keyword(s):  
Wastewater Treatment ◽  
Removal Efficiency ◽  
Wastewater Treatment Plant ◽  
Municipal Wastewater ◽  
Treatment Plant ◽  
Treated Wastewater ◽  
Municipal Wastewater Treatment ◽  
Adsorptive Treatment ◽  
Micropollutant Removal ◽  
Treatment Stage

In 2010, the Mannheim wastewater treatment plant was expanded with an adsorptive treatment stage to remove organic micropollutants (OMPs). Differences in the removal efficiencies of the OMPs investigated were determined over four years of operation by applying different powdered activated carbon (PAC) products and a constant volume-proportional dosing of 10 mg PAC/L. Possible influences on the removal efficiency are discussed here on the basis of the data obtained, exemplified for the analgesic diclofenac. The analyses show that the removal efficiency is influenced significantly by the spectral absorption coefficient (SAC) of the biologically treated wastewater at a wavelength of 254 nm (SAC254). Therefore, in order to ensure the constant treatment performance desired, the dosage of PAC should be adjusted to the measured SAC254 values. Moreover, as the SAC254 reduction correlates with the removal efficiency of OMPs, the additional determination of its reduction allows indirect control of the actual removal performance achieved. The SAC254 reduction can also be used for targeted control of the PAC dosage.

Sign in / Sign up

Export Citation Format

Share Document