scholarly journals Life Cycle Assessment Applications To The Dry Steam Geothermal Power Generation (Case Study: Star Energy Geothermal Wayang Windu, Ltd, Indonesia)

2019 ◽  
Author(s):  
Rina Annisa ◽  
Benno Rahardyan
Keyword(s):  
Global Warming ◽  
Life Cycle Assessment ◽  
Life Cycle ◽  
Power Plant ◽  
Environmental Impact ◽  
Global Warming Potential ◽  
Geothermal Power Plant ◽  
Continual Improvement ◽  
Acidification Potential ◽  
Geothermal Power

Geothermal potential in Indonesia estimate can produced renewable energy 29 GW, and until 2016 it still used 5% or about 1643 MW in. From that result, about 227 MW produced by Wayang Windu geothermal power plant. The Input were raw material, energy and water. These input produced electricity as main product, by product, and also other output that related to environment i.e. emission, solid waste and waste water. All environmental impacts should be controlled to comply with environmental standard, and even go beyond compliance and perform continual improvement.  This research will use Life Cycle Assessment method based on ISO 14040 and use cradle to gate concept with boundary from liquid steam production until electricity produced, and Megawatt Hours as the functional unit. Life Cycle Inventory has been done with direct input and output in the boundary and resulted that subsystem of Non Condensable Gas and condensate production have the largest environmental impact. LCI also show that every MWh electricity produced, it needed 6.87 Ton dry steam or 8.16 Ton liquid steam. Global Warming Potential (GWP) value is 0.155 Ton CO2eq./MWh, Acidification Potential (AP) 1.69 kg SO2eq./MWh, Eutrophication Potential (EP) 5.36 gPO4 eq./MWh and land use impacts 0.000024 PDF/m2. Life Cycle Impact Assessment resulted that AP contribute 78% of environmental impact and 98% resulted from H2S Non Condensable Gas. Comparison results with another dry steam geothermal power plant show that impact potential result of the company in good position and there’s a strong relation between gross production, GWP and AP value.Keywords: Life cycle assessment; Geothermal; Continual Improvement; Global Warming Potential; Acidification Potential

scholarly journals Life Cycle Assessment (LCA) Pengelolaan Sampah di TPA Gunung Panggung Kabupaten Tuban, Jawa Timur

2021 ◽  
Vol 22 (2) ◽  
pp. 147-161
Author(s):  
Rahmah Arfiyah Ula ◽  
Agus Prasetya ◽  
Iman Haryanto
Keyword(s):  
Global Warming ◽  
Life Cycle Assessment ◽  
Life Cycle ◽  
Anaerobic Digestion ◽  
Environmental Impact ◽  
Waste Management ◽  
Global Warming Potential ◽  
Waste Treatment ◽  
Acidification Potential ◽  
Alternative Scenarios

ABSTRACT The primary municipal waste treatment in Tuban Regency, East Java, was landfilling, besides the small amount of the waste was turned to compost. Landfilling causes global warming, which leads to climate change due to CH4 emission. This environmental impact could be worst by the population growth that increases the amount of waste. This study aimed to evaluate the environmental impact on waste management in the Gunung Panggung landfill in Tuban Regency and its alternative scenarios using Life Cycle Assessment (LCA). Four scenarios were used in this study. They are one existing scenario and three alternative scenarios comprising landfilling, composting, and anaerobic digestion. The scope of this study includes waste transportation to waste treatment which is landfilling, composting, and anaerobic digestion (AD). The functional unit of this analysis is per ton per year of treated waste. Environmental impacts selected are global warming potential, acidification potential, and eutrophication potential. The existing waste management in Gunung Panggung landfill showed the higher global warming potential because of the emission of CO2 and cost for human health, which is 6.379.506,17 CO2 eq/year and 5,92 DALY, respectively. Scenario 3 (landfilling, composting, and AD; waste sortation 70%) showed a lower environmental impact than others, but improvements were still needed. Covering compost pile or controlling compost turning frequency was proposed for scenario 3 amendment. Keywords: environmental impact, landfill, life cycle assessment, waste management   ABSTRAK Landfill merupakan pengelolaan sampah utama di tempat pemrosesan akhir (TPA) Gunung Panggung Kabupaten Tuban. Selain landfill, pengomposan diterapkan untuk mengolah sebagian kecil sampahnya. Landfill menghasilkan gas metana yang menyebabkan pemanasan global dan memicu perubahan iklim. Pertambahan penduduk memperbanyak sampah yang perlu diolah di TPA dan dapat memperparah dampak lingkungan yang ditimbulkan. Tujuan penelitian ini adalah menilai dampak lingkungan dari pengelolaan sampah eksisting di TPA Gunung Panggung Kabupaten Tuban Jawa Timur beserta skenario alternatifnya menggunakan Life Cycle Assessment (LCA). Terdapat satu skenario eksisting dan tiga skenario alternatif pengelolaan sampah yaitu landfilling, pengomposan, dan fermentasi anaerob (anaerobic digestion). Ruang lingkup studi meliputi pengangkutan sampah, pengelolaan sampah dengan cara pengomposan, Anaerobic Digestion (AD), dan landfill. Satuan fungsional yang digunakan yakni ton sampah yang diolah per tahun. Dampak lingkungan yang dipelajari di antaranya: pemanasan global, asidifikasi, dan eutrofikasi. Dampak lingkungan skenario eksisting menunjukkan nilai tertinggi terutama pada pemanasan global (6.379.506,17 CO2eq/tahun) dan kerugian pada kesehatan manusia (5,92 DALY). Skenario alternatif 3, yang meliputi pengelolaan secara landfill, pengomposan, dan AD menunjukkan dampak lingkungan yang kecil, namun memerlukan perbaikan. Perbaikan untuk skenario 3 yaitu dengan menambahkan penutup pada tumpukan kompos atau mengontrol frekuensi pembalikan kompos untuk mengurangi emisi NH3. Kata kunci: dampak lingkungan, life cycle assessment, pengelolaan sampah, tempat pemrosesan akhir

Integrating life cycle assessment and emergy synthesis for the evaluation of a dry steam geothermal power plant in Italy

Energy ◽  
2015 ◽  
Vol 86 ◽  
pp. 476-487 ◽  
Author(s):  
Elvira Buonocore ◽  
Laura Vanoli ◽  
Alberto Carotenuto ◽  
Sergio Ulgiati
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Power Plant ◽  
Geothermal Power Plant ◽  
Emergy Synthesis ◽  
Geothermal Power

scholarly journals Disposable Medical Masks: Environmental Costs

2021 ◽  
Author(s):  
BURÇİN ATILGAN TÜRKMEN
Keyword(s):  
New York ◽  
Global Warming ◽  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impact ◽  
Environmental Impacts ◽  
Global Warming Potential ◽  
Functional Unit ◽  
Environmental Costs ◽  
Inventory Data

Abstract A massive increase in the use and production of masks worldwide has been seen in the current COVID-19 pandemic, which has contributed to reducing the transmission of the virus globally. This paper aims to evaluate the environmental impacts of disposable medical masks using the Life Cycle Assessment (LCA) method, first for the selected functional unit related to the manufacturing of one disposable medical mask and then for the global manufacturing of this type of mask in 2020. The inventory data was constructed directly from the industry. The system boundaries include the fabric, nose wire, and ear loops parts, transportation of materials, body making, ultrasonic vending, and packaging steps. The results suggest that the global warming potential of a disposable medical mask is 0.02 g CO2-Eq. for which the main contributor is the packaging step (44%) followed by the life cycle of fabric (27%), and nose wire (14%) parts. In total, 52 billion disposable medical masks used worldwide consumes 25 TJ of energy in 2020. The global warming potential of disposable medical masks supplied in a year of the COVID-19 pandemic is 1.1 Mt CO2 eq., equivalent to around 1.3 billion return flights from Istanbul to New York. This paper assessed the hotspots in the medical mask, allowing for a significant reduction in the environmental impact of mask use. This can be used as a roadmap for future mask designs.

Life Cycle Assessment of Particulate Recycled Low Density Polyethylene and Recycled Polypropylene Reinforced with Talc and Fiberglass

2011 ◽  
Vol 471-472 ◽  
pp. 999-1004 ◽  
Author(s):  
Mariam Al-Ma'adeed ◽  
Gozde Ozerkan ◽  
Ramazan Kahraman ◽  
Saravanan Rajendran ◽  
Alma Hodzic
Keyword(s):  
Global Warming ◽  
Life Cycle Assessment ◽  
Life Cycle ◽  
Composite Materials ◽  
Environmental Impact ◽  
Impact Assessment ◽  
Human Toxicity ◽  
Acidification Potential ◽  
The Impact ◽  
Abiotic Depletion

Although recycled polymers and reinforced polymer composites have been in use for many years there is little information available on their environmental impacts. The goal of the present study is to analyze the environmental impact of new composite materials obtained from the combination of recycled thermoplastics (polypropylene [PP] and polyethylene [PE]) with mineral fillers like talc and with glass fiber. The environmental impact of these composite materials is compared to the impact of virgin PP and PE. The recycled and virgin materials were compared using life cycle assessment method according to their environmental effects. Within the scope of the study, GaBi software was used for Life Cycle Assessment (LCA) analysis. From cradle-to-grave life cycle inventory studies were performed for 1 kg of each of the thermoplastics. Landfilling was considered as reference scenario and compared with filled recycled plastics. A quantitative impact assessment was performed for four environmental impact categories, global warming (GWP) over a hundred years, human toxicity (HTP), abiotic depletion (ADP) and acidification potential (AP) were taken into consideration during LCA. In the comparison of recycled and virgin polymers, it was seen that recycling has lower environmental effect for different impact assessment methods like acidification potential, abiotic depletion, human toxicity and global warming.

scholarly journals Life cycle assessment and energy comparison of aseptic ohmic heating and appertization of chopped tomatoes with juice

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Sami Ghnimi ◽  
Amin Nikkhah ◽  
Jo Dewulf ◽  
Sam Van Haute
Keyword(s):  
Global Warming ◽  
Life Cycle Assessment ◽  
Life Cycle ◽  
Energy Consumption ◽  
Environmental Impact ◽  
Uncertainty Analysis ◽  
Impact Assessment ◽  
Global Warming Potential ◽  
Ohmic Heating ◽  
Heating System

AbstractThe energy balance and life cycle assessment (LCA) of ohmic heating and appertization systems for processing of chopped tomatoes with juice (CTwJ) were evaluated. The data included in the study, such as processing conditions, energy consumption, and water use, were experimentally collected. The functional unit was considered to be 1 kg of packaged CTwJ. Six LCA impact assessment methodologies were evaluated for uncertainty analysis of selection of the impact assessment methodology. The energy requirement evaluation showed the highest energy consumption for appertization (156 kWh/t of product). The energy saving of the ohmic heating line compared to the appertization line is 102 kWh/t of the product (or 65% energy saving). The energy efficiencies of the appertization and ohmic heating lines are 25% and 77%, respectively. Regarding the environmental impact, CTwJ processing and packaging by appertization were higher than those of ohmic heating systems. In other words, CTwJ production by the ohmic heating system was more environmentally efficient. The tin production phase was the environmental hotspot in packaged CTwJ production by the appertization system; however, the agricultural phase of production was the hotspot in ohmic heating processing. The uncertainty analysis results indicated that the global warming potential for appertization of 1 kg of packaged CTwJ ranges from 4.13 to 4.44 kg CO2eq. In addition, the global warming potential of the ohmic heating system ranges from 2.50 to 2.54 kg CO2eq. This study highlights that ohmic heating presents a great alternative to conventional sterilization methods due to its low environmental impact and high energy efficiency.

scholarly journals Life Cycle Assessment of Autonomous Electric Field Tractors in Swedish Agriculture

2021 ◽  
Vol 13 (20) ◽  
pp. 11285
Author(s):  
Oscar Lagnelöv ◽  
Gunnar Larsson ◽  
Anders Larsolle ◽  
Per-Anders Hansson
Keyword(s):  
Global Warming ◽  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impact ◽  
Global Warming Potential ◽  
Resource Scarcity ◽  
Key Factors ◽  
Agricultural Work ◽  
Single Score ◽  
Damage Categories

There is an increased interest for battery electric vehicles in multiple sectors, including agriculture. The potential for lowered environmental impact is one of the key factors, but there exists a knowledge gap between the environmental impact of on-road vehicles and agricultural work machinery. In this study, a life cycle assessment was performed on two smaller, self-driving battery electric tractors, and the results were compared to those of a conventional tractor for eleven midpoint characterisation factors, three damage categories and one weighted single score. The results showed that compared to the conventional tractor, the battery electric tractor had a higher impact in all categories during the production phase, with battery production being a majority contributor. However, over the entire life cycle, it had a lower impact in the weighted single score (−72%) and all three damage categories; human health (−74%), ecosystem impact (−47%) and resource scarcity (−67%). The global warming potential over the life cycle of the battery electric tractor was 102 kg CO2eq ha−1 y−1 compared to 293 kg CO2eq ha−1 y−1 for the conventional system. For the global warming potential category, the use phase was the most influential and the fuel used was the single most important factor.

scholarly journals LCA and Exergo-Environmental Evaluation of a Combined Heat and Power Double-Flash Geothermal Power Plant

2021 ◽  
Vol 13 (4) ◽  
pp. 1935
Author(s):  
Vitantonio Colucci ◽  
Giampaolo Manfrida ◽  
Barbara Mendecka ◽  
Lorenzo Talluri ◽  
Claudio Zuffi
Keyword(s):  
Life Cycle ◽  
Power Plant ◽  
Environmental Analysis ◽  
Combined Heat And Power ◽  
Hot Water ◽  
Environmental Cost ◽  
Published Data ◽  
Geothermal Power Plant ◽  
Geothermal Power ◽  
Double Flash

This study deals with the life cycle assessment (LCA) and an exergo-environmental analysis (EEvA) of the geothermal Power Plant of Hellisheiði (Iceland), a combined heat and power double flash plant, with an installed power of 303.3 MW for electricity and 133 MW for hot water. LCA approach is used to evaluate and analyse the environmental performance at the power plant global level. A more in-depth study is developed, at the power plant components level, through EEvA. The analysis employs existing published data with a realignment of the inventory to the latest data resource and compares the life cycle impacts of three methods (ILCD 2011 Midpoint, ReCiPe 2016 Midpoint-Endpoint, and CML-IA Baseline) for two different scenarios. In scenario 1, any emission abatement system is considered. In scenario 2, re-injection of CO2 and H2S is accounted for. The analysis identifies some major hot spots for the environmental power plant impacts, like acidification, particulate matter formation, ecosystem, and human toxicity, mainly caused by some specific sources. Finally, an exergo-environmental analysis allows indicating the wells as significant contributors of the environmental impact rate associated with the construction, Operation & Maintenance, and end of life stages and the HP condenser as the component with the highest environmental cost rate.

scholarly journals Environmental impacts of wooden, plastic, and wood-polymer composite pallet: a life cycle assessment approach

2021 ◽  
Author(s):  
Md.Musharof Hussain Khan ◽  
Ivan Deviatkin ◽  
Jouni Havukainen ◽  
Mika Horttanainen
Keyword(s):  
Sensitivity Analysis ◽  
Global Warming ◽  
Life Cycle Assessment ◽  
Life Cycle ◽  
Polymer Composite ◽  
Global Warming Potential ◽  
Consequential Life Cycle Assessment ◽  
Wood Polymer ◽  
Biogenic Carbon ◽  
Wood Polymer Composite

Abstract Purpose Waste recycling is one of the essential tools for the European Union’s transition towards a circular economy. One of the possibilities for recycling wood and plastic waste is to utilise it to produce composite product. This study analyses the environmental impacts of producing composite pallets made of wood and plastic waste from construction and demolition activities in Finland. It also compares these impacts with conventional wooden and plastic pallets made of virgin materials. Methods Two different life cycle assessment methods were used: attributional life cycle assessment and consequential life cycle assessment. In both of the life cycle assessment studies, 1000 trips were considered as the functional unit. Furthermore, end-of-life allocation formula such as 0:100 with a credit system had been used in this study. This study also used sensitivity analysis and normalisation calculation to determine the best performing pallet. Result and discussion In the attributional cradle-to-grave life cycle assessment, wood-polymer composite pallets had the lowest environmental impact in abiotic depletion potential (fossil), acidification potential, eutrophication potential, global warming potential (including biogenic carbon), global warming potential (including biogenic carbon) with indirect land-use change, and ozone depletion potential. In contrast, wooden pallets showed the lowest impact on global warming potential (excluding biogenic carbon). In the consequential life cycle assessment, wood-polymer composite pallets showed the best environmental impact in all impact categories. In both attributional and consequential life cycle assessments, plastic pallet had the maximum impact. The sensitivity analysis and normalisation calculation showed that wood-polymer composite pallets can be a better choice over plastic and wooden pallet. Conclusions The overall results of the pallets depends on the methodological approach of the LCA. However, it can be concluded that the wood-polymer composite pallet can be a better choice over the plastic pallet and, in most cases, over the wooden pallet. This study will be of use to the pallet industry and relevant stakeholders.

Sign in / Sign up

Export Citation Format

Share Document