Electrochromic Behaviors of Water-Soluble Polyaniline with Covalently Bonded Acetyl Ferrocene

2018 ◽  
Vol 47 (7) ◽  
pp. 3974-3982 ◽  
Author(s):  
Shanxin Xiong ◽  
Ru Wang ◽  
Shuaishuai Li ◽  
Bohua Wu ◽  
Jia Chu ◽  
...  
Keyword(s):  
Water Soluble ◽  
Covalently Bonded

Nano-Sized [60]Fullerene-Cyclodextrin Molecules

2001 ◽  
Vol 675 ◽  
Author(s):  
Jeong-Seo Park ◽  
Han-Chang Kang ◽  
Kurt E. Geckeler
Keyword(s):  
Biomedical Applications ◽  
Addition Reaction ◽  
Water Soluble ◽  
Separation And Purification ◽  
Subsequent Reaction ◽  
Fullerene Derivatives ◽  
Covalently Bonded ◽  
Scattering Measurements ◽  
Ft Ir ◽  
Ft Ir Spectroscopy

ABSTRACTAs [60]fullerene is a very hydrophobic macromolecule, there have been a number of attempts to make it more hydrophilic for biomedical applications. By attaching hydrophilic moieties such as poly(oxyethylene)(POE) chains and cyclodextrin molecules to [60]fullerene, novel water-soluble and biocompatible materials have been successfully prepared [1,2].The synthesis of novel macrocyclic fullerene conjugates which are water-soluble is reported. The telechelic fullerene derivatives have been prepared via addition reaction of POE-based arms with covalently bonded β-cyclodextrin (CD) to [60]fullerene. To this end, a mono-tosylated CD derivative has been prepared in pyridine and then reacted with an amino-functional POE in the presence of triethylamine. The subsequent reaction of [60]fullerene with the hydrophilic POE-conjugated CD-derivative yielded the macrofullerene after separation and purification procedures.The macrocyclic [60]fullerene derivatives obtained were soluble in water and characterized by UV-VIS and FT-IR spectroscopy as well as light scattering measurements and thermogravimetric analysis.

Novel Water-Soluble Shape-Regulatable Luminescent Nanoparticles by Non-Covalently Bonded Self-Assembly

2006 ◽  
Vol 27 (16) ◽  
pp. 1317-1322 ◽  
Author(s):  
Zhi-Jian Zhang ◽  
Zhe Zheng ◽  
Liang-Liang Qiang ◽  
Zhun Ma ◽  
Shi-Xiang Xie ◽  
...  
Keyword(s):  
Self Assembly ◽  
Water Soluble ◽  
Covalently Bonded ◽  
Luminescent Nanoparticles

scholarly journals Cranberry (Vaccinium macrocarpon) Juice Precipitate Pigmentation Is Mainly Polymeric Colors and Has Limited Impact on Soluble Anthocyanin Loss

Antioxidants ◽  
2021 ◽  
Vol 10 (11) ◽  
pp. 1788
Author(s):  
Matthew R. Dorris ◽  
Bradley W. Bolling
Keyword(s):  
Vanillic Acid ◽  
Protocatechuic Acid ◽  
Water Soluble ◽  
Chemical Degradation ◽  
Acid Formation ◽  
Cranberry Juice ◽  
Color Quality ◽  
Degradation Rates ◽  
Covalently Bonded ◽  
Health Promoting

Anthocyanins degrade in fruit juice during storage, reducing juice color quality and depleting the health-promoting components of juice. Common water-soluble products of anthocyanins’ chemical degradation are known, but little is known about the contribution of the insoluble phase to loss processes. Cranberry juice and isolated anthocyanins were incubated at 50 °C for up to 10 days to determine polyphenol profiles and degradation rates. Anthocyanin-proanthocyanidin heteropolymers were analyzed via Matrix Assisted Laser Desorption/Ionization (MALDI)- Time of Flight (TOF) Mass Spectrometry (MS). Formation of soluble protocatechuic acid accounted for 260 ± 10% and insoluble materials for 80 ± 20% of lost soluble cyanidin-glycosides in juice, over-representations plausibly due to quercetin and (epi)catechin in cranberry juice and not observed in the values of 70 ± 20% and 16 ± 6% in the purified anthocyanin system. Loss processes of soluble peonidin-glycosides were better accounted for, where 31 ± 2% were attributable to soluble vanillic acid formation and 3 ± 1% to insoluble materials in cranberry juice and 35 ± 5% to vanillic acid formation and 1.6 ± 0.8% to insoluble materials in the purified anthocyanin system. Free anthocyanins were below quantifiable levels in precipitate, implying most anthocyanins in precipitate were polymeric colors (PCs). PCs in the precipitate included cyanidin- and peonidin-hexosides and -pentosides covalently bonded to procyanidins. Therefore, formation of cranberry juice precipitate does not deplete a large portion of soluble anthocyanins; rather, the precipitate’s pigmentation results from PCs that are also present in the soluble phase.

A Resorcinol-Formaldehyde Resin as an Embedding Material for Electron Microscopy of Membranes

1969 ◽  
Vol 27 ◽  
pp. 328-329 ◽  
Author(s):  
J. G. Robertson ◽  
D. F. Parsons
Keyword(s):  
Electron Microscopy ◽  
Osmium Tetroxide ◽  
Neutral Lipids ◽  
Lipid Extraction ◽  
Water Soluble ◽  
Formaldehyde Resin ◽  
Electron Microscope Autoradiography ◽  
Resorcinol Formaldehyde ◽  
Major Disadvantage ◽  
Cell Organization

The extraction of lipids from tissues during fixation and embedding for electron microscopy is widely recognized as a source of possible artifact, especially at the membrane level of cell organization. Lipid extraction is also a major disadvantage in electron microscope autoradiography of radioactive lipids, as in studies of the uptake of radioactive fatty acids by intestinal slices. Retention of lipids by fixation with osmium tetroxide is generally limited to glycolipids, phospholipids and highly unsaturated neutral lipids. Saturated neutral lipids and sterols tend to be easily extracted by organic dehydrating reagents prior to embedding. Retention of the more saturated lipids in embedded tissue might be achieved by developing new cross-linking reagents, by the use of highly water soluble embedding materials or by working at very low temperatures.

Ferritin Labeled Antibody Staining of Thin Sections

1969 ◽  
Vol 27 ◽  
pp. 420-421
Author(s):  
J. D. McLean ◽  
S. J. Singer
Keyword(s):  
Biological Material ◽  
Water Soluble ◽  
Thin Sections ◽  
Antibody Staining ◽  
Thin Sectioning ◽  
Ultrathin Sections

The successful application of ferritin labeled antibodies (F-A) to ultrathin sections of biological material has been hampered by two main difficulties. Firstly the normally used procedures for the preparation of material for thin sectioning often result in a loss of antigenicity. Secondly the polymers employed for embedding may non-specifically absorb the F-A. Our earlier use of cross-linked polyampholytes as embedding media partially overcame these problems. However the water-soluble monomers used for this method still extract many lipids from the material.

The Effect of Benzene on Bluegill Olfactory Lamellae

1985 ◽  
Vol 43 ◽  
pp. 574-575
Author(s):  
D.R. Mattie ◽  
J.W. Fisher
Keyword(s):  
Surface Morphology ◽  
Soluble Fraction ◽  
Lepomis Macrochirus ◽  
Sublethal Concentration ◽  
Water Soluble ◽  
Major Constituent ◽  
Jet Fuels ◽  
Aquatic Biota ◽  
Normal Surface ◽  
Cacodylate Buffer

Jet fuels such as JP-4 can be introduced into the environment and come in contact with aquatic biota in several ways. Studies in this laboratory have demonstrated JP-4 toxicity to fish. Benzene is the major constituent of the water soluble fraction of JP-4. The normal surface morphology of bluegill olfactory lamellae was examined in conjunction with electrophysiology experiments. There was no information regarding the ultrastructural and physiological responses of the olfactory epithelium of bluegills to acute benzene exposure.The purpose of this investigation was to determine the effects of benzene on the surface morphology of the nasal rosettes of the bluegill sunfish (Lepomis macrochirus). Bluegills were exposed to a sublethal concentration of 7.7±0.2ppm (+S.E.M.) benzene for five, ten or fourteen days. Nasal rosettes were fixed in 2.5% glutaraldehyde and 2.0% paraformaldehyde in 0.1M cacodylate buffer (pH 7.4) containing 1.25mM calcium chloride. Specimens were processed for scanning electron microscopy.

An SEM study of raphide crystal initials in the leaves of vitis (grape)

1995 ◽  
Vol 53 ◽  
pp. 984-985
Author(s):  
H. J. Arnott ◽  
M. A. Webb ◽  
L. E. Lopez
Keyword(s):  
Calcium Oxalate ◽  
Water Soluble ◽  
Calcium Oxalate Crystals ◽  
Calcium Oxalate Crystal ◽  
Oxalate Crystals ◽  
Large Numbers ◽  
Sem Study ◽  
The Matrix ◽  
Crystal Cells ◽  
Crystal Idioblast

Many papers have been published on the structure of calcium oxalate crystals in plants, however, few deal with the early development of crystals. Large numbers of idioblastic calcium oxalate crystal cells are found in the leaves of Vitis mustangensis, V. labrusca and V. vulpina. A crystal idioblast, or raphide cell, will produce 150-300 needle-like calcium oxalate crystals within a central vacuole. Each raphide crystal is autonomous, having been produced in a separate membrane-defined crystal chamber; the idioblast''s crystal complement is collectively embedded in a water soluble glycoprotein matrix which fills the vacuole. The crystals are twins, each having a pointed and a bidentate end (Fig 1); when mature they are about 0.5-1.2 μn in diameter and 30-70 μm in length. Crystal bundles, i.e., crystals and their matrix, can be isolated from leaves using 100% ETOH. If the bundles are treated with H2O the matrix surrounding the crystals rapidly disperses.

Morphological studies of linear (AB)n multiblock copolymers and their blends

1992 ◽  
Vol 50 (1) ◽  
pp. 384-385
Author(s):  
Richard J. Spontak ◽  
Steven D. Smith ◽  
Arman Ashraf
Keyword(s):  
Electron Microscopy ◽  
Microphase Separation ◽  
Multiblock Copolymers ◽  
First Order ◽  
Morphological Studies ◽  
Transmission Electron ◽  
First Order Phase Transition ◽  
Covalently Bonded ◽  
Total Molecular Weight ◽  
First Order Phase

Block copolymers are composed of sequences of dissimilar chemical moieties covalently bonded together. If the block lengths of each component are sufficiently long and the blocks are thermodynamically incompatible, these materials are capable of undergoing microphase separation, a weak first-order phase transition which results in the formation of an ordered microstructural network. Most efforts designed to elucidate the phase and configurational behavior in these copolymers have focused on the simple AB and ABA designs. Few studies have thus far targeted the perfectly-alternating multiblock (AB)n architecture. In this work, two series of neat (AB)n copolymers have been synthesized from styrene and isoprene monomers at a composition of 50 wt% polystyrene (PS). In Set I, the total molecular weight is held constant while the number of AB block pairs (n) is increased from one to four (which results in shorter blocks). Set II consists of materials in which the block lengths are held constant and n is varied again from one to four (which results in longer chains). Transmission electron microscopy (TEM) has been employed here to investigate the morphologies and phase behavior of these materials and their blends.

Characterization of Chemical Impurities in Glutaraldehyde

1975 ◽  
Vol 33 ◽  
pp. 620-621
Author(s):  
B. J. Grenon ◽  
A. J. Tousimis
Keyword(s):  
Glutaric Acid ◽  
Spectroscopic Analysis ◽  
Aldol Condensation ◽  
Condensation Product ◽  
Amorphous Solid ◽  
Water Soluble ◽  
Impurity Component ◽  
Chemical Impurities ◽  
Soluble Liquid

Ever since the introduction of glutaraldehyde as a fixative in electron microscopy of biological specimens, the identification of impurities and consequently their effects on biologic ultrastructure have been under investigation. Several reports postulate that the impurities of glutaraldehyde, used as a fixative, are glutaric acid, glutaraldehyde polymer, acrolein and glutaraldoxime.Analysis of commercially available biological or technical grade glutaraldehyde revealed two major impurity components, none of which has been reported. The first compound is a colorless, water-soluble liquid with a boiling point of 42°C at 16 mm. Utilizing Nuclear Magnetic Resonance (NMR) spectroscopic analysis, this compound has been identified to be — dihydro-2-ethoxy 2H-pyran. This impurity component of the glutaraldehyde biological or technical grades has an UV absorption peak at 235nm. The second compound is a white amorphous solid which is insoluble in water and has a melting point of 80-82°C. Initial chemical analysis indicates that this compound is an aldol condensation product(s) of glutaraldehyde.

Morphological behavior of compatibilized ternary blends prepared by mechanical mixing

1993 ◽  
Vol 51 ◽  
pp. 1200-1201
Author(s):  
S.D. Smith ◽  
R.J. Spontak ◽  
D.H. Melik ◽  
S.M. Buehler ◽  
K.M. Kerr ◽  
...  
Keyword(s):  
Interfacial Adhesion ◽  
Diblock Copolymers ◽  
Ternary Blends ◽  
Mechanical Mixing ◽  
Design Considerations ◽  
Covalently Bonded ◽  
Homopolymer Blends ◽  
Emulsifying Agent ◽  
Surface Active ◽  
Low Entropy

When blended together, homopolymers A and B will normally macrophase-separate into relatively large (≫1 μm) A-rich and B-rich phases, between which exists poor interfacial adhesion, due to a low entropy of mixing. The size scale of phase separation in such a blend can be reduced, and the extent of interfacial A-B contact and entanglement enhanced, via addition of an emulsifying agent such as an AB diblock copolymer. Diblock copolymers consist of a long sequence of A monomers covalently bonded to a long sequence of B monomers. These materials are surface-active and decrease interfacial tension between immiscible phases much in the same way as do small-molecule surfactants. Previous studies have clearly demonstrated the utility of block copolymers in compatibilizing homopolymer blends and enhancing blend properties such as fracture toughness. It is now recognized that optimization of emulsified ternary blends relies upon design considerations such as sufficient block penetration into a macrophase (to avoid block slip) and prevention of a copolymer multilayer at the A-B interface (to avoid intralayer failure).

Sign in / Sign up

Export Citation Format

Share Document