EDTA-Complexing Sol–Gel Synthesis of LaFeO3 Nanostructures and Their Gas-Sensing Properties

2018 ◽  
Vol 48 (2) ◽  
pp. 982-990 ◽  
Author(s):  
Fan Tong ◽  
Ye Zhao ◽  
Xiao Qu ◽  
Rong Yang ◽  
Maohua Wang
Keyword(s):  
Gas Sensing ◽  
Sol Gel ◽  
Sensing Properties ◽  
Gas Sensing Properties ◽  
Sol Gel Synthesis

A sol-gel synthesis and gas-sensing properties of finely dispersed ZrTiO4

2019 ◽  
Vol 225 ◽  
pp. 347-357 ◽  
Author(s):  
Elizaveta P. Simonenko ◽  
Nikolay P. Simonenko ◽  
Gennady P. Kopitsa ◽  
Artem S. Mokrushin ◽  
Tamara V. Khamova ◽  
...  
Keyword(s):  
Gas Sensing ◽  
Sol Gel ◽  
Sensing Properties ◽  
Gas Sensing Properties ◽  
Sol Gel Synthesis

Sol-Gel Synthesis and Gas Sensing Properties of In203 Thin Films

2001 ◽  
Author(s):  
S. Capone ◽  
M. Epifani ◽  
G. Faglia ◽  
P. Nelli ◽  
R. Rella ◽  
...  
Keyword(s):  
Thin Films ◽  
Gas Sensing ◽  
Sol Gel ◽  
Sensing Properties ◽  
Gas Sensing Properties ◽  
Sol Gel Synthesis

TUNGSTEN-DOPED TiO2 NANOLAYERS WITH IMPROVED CO2 GAS SENSING PROPERTIES FOR ENVIRONMENTAL APPLICATIONS

2017 ◽  
Vol 24 (Supp02) ◽  
pp. 1850024 ◽  
Author(s):  
MALIHEH SABERI ◽  
ALI AKBAR ASHKARRAN
Keyword(s):  
Electron Microscopy ◽  
Gas Sensing ◽  
Operating Temperature ◽  
Sol Gel ◽  
Optimum Operating ◽  
Optimum Operating Temperature ◽  
Sensing Properties ◽  
Vis Spectroscopy ◽  
Gas Sensing Properties ◽  
Tungsten Concentration

Tungsten-doped TiO2 gas sensors were successfully synthesized using sol–gel process and spin coating technique. The fabricated sensor was characterized by field emission scanning electron microscopy (FE-SEM), ultraviolet visible (UV–Vis) spectroscopy, transmission electron microscopy (TEM), X-Ray diffraction (XRD) and Fourier transform infrared (FTIR) spectroscopy. Gas sensing properties of pristine and tungsten-doped TiO2 nanolayers (NLs) were probed by detection of CO2 gas. A series of experiments were conducted in order to find the optimum operating temperature of the prepared sensors and also the optimum value of tungsten concentration in TiO2 matrix. It was found that introducing tungsten into the TiO2 matrix enhanced the gas sensing performance. The maximum response was found to be (1.37) for 0.001[Formula: see text]g tungsten-doped TiO2 NLs at 200[Formula: see text]C as an optimum operating temperature.

scholarly journals Discriminable Sensing Response Behavior to Homogeneous Gases Based on n-ZnO/p-NiO Composites

Nanomaterials ◽  
2020 ◽  
Vol 10 (4) ◽  
pp. 785 ◽  
Author(s):  
Wen-Dong Zhou ◽  
Davoud Dastan ◽  
Jing Li ◽  
Xi-Tao Yin ◽  
Qi Wang
Keyword(s):  
Gas Sensors ◽  
Gas Sensing ◽  
Sol Gel ◽  
High Sensitivity ◽  
Oxide Semiconductor ◽  
Sensing Properties ◽  
Gas Sensing Properties ◽  
P Type ◽  
Type Response ◽  
Properties Of Composites

Metal oxide semiconductor (MOS) gas sensors have the advantages of high sensitivity, short response-recovery time and long-term stability. However, the shortcoming of poor discriminability of homogeneous gases limits their applications in gas sensors. It is well-known that the MOS materials have similar gas sensing responses to homogeneous gases such as CO and H2, so it is difficult for these gas sensors to distinguish the two gases. In this paper, simple sol–gel method was employed to obtain the ZnO–xNiO composites. Gas sensing performance results illustrated that the gas sensing properties of composites with x > 0.425 showed a p-type response to both CO and H2, while the gas sensing properties of composites with x < 0.425 showed an n-type response to both CO and H2. However, it was interesting that ZnO–0.425NiO showed a p-type response to CO but an discriminable response (n-type) to H2, which indicated that modulating the p-type or n-type semiconductor concentration in p-n composites could be an effective method with which to improve the discriminability of this type of gas sensor regarding CO and H2. The phenomenon of the special gas sensing behavior of ZnO–0.425NiO was explained based on the experimental observations and a range of characterization techniques, including XRD, HRTEM and XPS, in detail.

A Formaldehyde Gas Sensor Based on Zinc Doped Lanthanum Ferrite

2013 ◽  
Vol 873 ◽  
pp. 304-310 ◽  
Author(s):  
Jin Zhang ◽  
Yu Min Zhang ◽  
Chang Yi Hu ◽  
Zhong Qi Zhu ◽  
Qing Ju Liu
Keyword(s):  
Gas Sensing ◽  
Sol Gel ◽  
X Ray Diffraction ◽  
Sensing Properties ◽  
Transmission Electron ◽  
Lanthanum Ferrite ◽  
Gas Sensing Properties ◽  
Recovery Times ◽  
Response And Recovery ◽  
Sensing Characteristics

The gas-sensing properties of zinc doped lanthanum ferrite (Zn-LaFeO3) compounds for formaldehyde were investigated in this paper. Zn-LaFeO3 powders were prepared using sol-gel method combined with microwave chemical synthesis. The powders were characterized by X-ray diffraction (XRD) and transmission electron microscopy (TEM), respectively. The formaldehyde gas-sensing characteristics for the sample were examined. The experimental results indicate that the sensor based on the sample Zn-LaFeO3 shows excellent gas-sensing properties to formaldehyde gas. At the optimal operating temperature of 250°C, the sensitivity of the sensor based on LaFe0.7Zn0.3O3 to 100ppm formaldehyde is 38, while to other test gases, the sensitivity is all lower than 20. The response and recovery times for the sample to formaldehyde gas are 100s and 100s, respectively.

Gas Sensing Properties of Nanocrystalline Indium Oxide Synthesized by Sol–Gel Method

2012 ◽  
Vol 5 (1) ◽  
pp. 109-113 ◽  
Author(s):  
S. C. Kulkarni ◽  
C. S. Aher ◽  
R. Y. Borse ◽  
B. G. Bharate ◽  
SalemS. Al-Deyab ◽  
...  
Keyword(s):  
Indium Oxide ◽  
Gas Sensing ◽  
Sol Gel ◽  
Gel Method ◽  
Sensing Properties ◽  
Sol Gel Method ◽  
Gas Sensing Properties

scholarly journals Structural, Electrical, and Ethanol-Sensing Properties ofLa1-xNdxFeO3Nanoparticles

2014 ◽  
Vol 2014 ◽  
pp. 1-5 ◽  
Author(s):  
Nguyen Thi Thuy ◽  
Dang Le Minh ◽  
Ho Truong Giang ◽  
Nguyen Ngoc Toan
Keyword(s):  
Gas Sensing ◽  
Perovskite Phase ◽  
Sol Gel ◽  
Gel Method ◽  
Sensing Properties ◽  
Gas Sensing Properties ◽  
Crystallite Sizes ◽  
Orthorhombic Perovskite ◽  
Ethanol Sensing ◽  
20 Nm

The nanocrystallineLa1-xNdxFeO3(0≤x ≤1.0) powders with orthorhombic perovskite phase were prepared by sol-gel method. The average crystallite sizes ofLa1-xNdxFeO3powders are about 20 nm. The resistance and gas-sensing properties of theLa1-xNdxFeO3based sensors were investigated in the temperature range from 160 to 300°C. The results demonstrated that the resistance and response of the perovskite thick films changed with the increase of Nd content.

Sign in / Sign up

Export Citation Format

Share Document