TUNGSTEN-DOPED TiO2 NANOLAYERS WITH IMPROVED CO2 GAS SENSING PROPERTIES FOR ENVIRONMENTAL APPLICATIONS

2017 ◽  
Vol 24 (Supp02) ◽  
pp. 1850024 ◽  
Author(s):  
MALIHEH SABERI ◽  
ALI AKBAR ASHKARRAN
Keyword(s):  
Electron Microscopy ◽  
Gas Sensing ◽  
Operating Temperature ◽  
Sol Gel ◽  
Optimum Operating ◽  
Optimum Operating Temperature ◽  
Sensing Properties ◽  
Vis Spectroscopy ◽  
Gas Sensing Properties ◽  
Tungsten Concentration

Tungsten-doped TiO2 gas sensors were successfully synthesized using sol–gel process and spin coating technique. The fabricated sensor was characterized by field emission scanning electron microscopy (FE-SEM), ultraviolet visible (UV–Vis) spectroscopy, transmission electron microscopy (TEM), X-Ray diffraction (XRD) and Fourier transform infrared (FTIR) spectroscopy. Gas sensing properties of pristine and tungsten-doped TiO2 nanolayers (NLs) were probed by detection of CO2 gas. A series of experiments were conducted in order to find the optimum operating temperature of the prepared sensors and also the optimum value of tungsten concentration in TiO2 matrix. It was found that introducing tungsten into the TiO2 matrix enhanced the gas sensing performance. The maximum response was found to be (1.37) for 0.001[Formula: see text]g tungsten-doped TiO2 NLs at 200[Formula: see text]C as an optimum operating temperature.

scholarly journals Study on the Ozone Gas Sensing Properties of Rf-Sputtered Al-Doped NiO Films

2021 ◽  
Vol 11 (7) ◽  
pp. 3104
Author(s):  
Athanasios Paralikis ◽  
Emmaouil Gagaoudakis ◽  
Viktoras Kampitakis ◽  
Elias Aperathitis ◽  
George Kiriakidis ◽  
...  
Keyword(s):  
Oxygen Content ◽  
Room Temperature ◽  
Gas Sensing ◽  
Operating Temperature ◽  
Rf Sputtering ◽  
Optimum Operating ◽  
Optimum Operating Temperature ◽  
Sensing Properties ◽  
Al Content ◽  
Gas Sensing Properties

Al-doped NiO (NiO:Al) has attracted the interest of researchers due to its excellent optical and electrical properties. In this work, NiO:Al films were deposited on glass substrates by the radio frequencies (rf) sputtering technique at room temperature and they were tested against ozone gas. The Oxygen content in (Ar-O2) plasma was varied from 2% to 4% in order to examine its effect on the gas sensing performance of the films. The thickness of the films was between 160.3 nm and 167.5 nm, while the Al content was found to be between 5.3at% and 6.7at%, depending on the oxygen content in plasma. It was found that NiO:Al films grown with 4% O2 in plasma were able to detect 60 ppb of ozone with a sensitivity of 3.18% at room temperature, while the detection limit was further decreased to 10 ppb, with a sensitivity of 2.54%, at 80 °C, which was the optimum operating temperature for these films. In addition, the films prepared in 4% O2 in plasma had lower response and recovery time compared to those grown with lower O2 content in plasma. Finally, the role of the operating temperature on the gas sensing properties of the NiO:Al films was investigated.

Sunflower-Like Zinc Oxide Architectures: The Application of Acetone Gas Sensor for Asphalt Pavement Construction

2021 ◽  
Vol 16 (1) ◽  
pp. 6-10
Author(s):  
Bo Zuo ◽  
Yan Fu ◽  
Gaofeng Deng ◽  
Lingling Qi
Keyword(s):  
Gas Sensor ◽  
Gas Sensing ◽  
Operating Temperature ◽  
Asphalt Pavement ◽  
Optimum Operating ◽  
Optimum Operating Temperature ◽  
Measurement Results ◽  
Gas Sensing Properties ◽  
Pavement Construction ◽  
Gas Response

In this work, hierarchical nanorod-assembled ZnO sunflower-like structures were successfully synthesized through a water bath route. Crystalline phase and surface morphology of as-prepared ZnO were investigated via XRD and SEM techniques, respectively. Gas sensor fabricated from nanorod-assembled ZnO sunflowers was made, which exhibits excellent gas sensing properties at various concentrations of acetone and different operating temperatures. The gas response values at the optimum operating temperature (300 °C) are 49 towards 200 ppm acetone. The sensing measurement results indicates that the as-synthesized ZnO material may depict potential application as an acetone detector in asphalt pavement construction.

scholarly journals Ppb-Level Butanone Sensor Based on ZnO-TiO2-rGO Nanocomposites

Chemosensors ◽  
2021 ◽  
Vol 9 (10) ◽  
pp. 284
Author(s):  
Zhijia Liao ◽  
Yao Yu ◽  
Zhenyu Yuan ◽  
Fanli Meng
Keyword(s):  
Gas Sensing ◽  
Operating Temperature ◽  
Skin Irritation ◽  
Optimum Operating ◽  
Optimum Operating Temperature ◽  
Lower Detection Limit ◽  
Gas Sensing Properties ◽  
Lower Detection ◽  
Organic Gases ◽  
Sensing Performance

In this paper, ZnO-TiO2-rGO nanocomposites were successfully synthesized by the hydrothermal method. The morphology and structure of the synthesized nanomaterials were characterized by SEM, XRD, HRTEM, and XPS. Butanone is a typical ketone product. The vapors are extremely harmful once exposed, triggering skin irritation in mild cases and affecting our breathing in severe cases. In this paper, the gas-sensing properties of TiO2, ZnO, ZnO-TiO2, and ZnO-TiO2-rGO nanomaterials to butanone vapor were studied. The optimum operating temperature of the ZnO-TiO2-rGO sensor is 145 °C, which is substantially lower than the other three sensors. The selectivity for butanone vapor is greatly improved, and the response is 5.6 times higher than that of other organic gases. The lower detection limit to butanone can reach 63 ppb. Therefore, the ZnO-TiO2-rGO sensor demonstrates excellent gas-sensing performance to butanone. Meanwhile, the gas-sensing mechanism of the ZnO-TiO2-rGO sensor to butanone vapor was also analyzed.

scholarly journals A comparative study on the electrical and gas sensing properties of thick films prepared with synthesized nano-sized and commercial micro-sized Fe2O3 powders

2017 ◽  
Vol 11 (4) ◽  
pp. 265-274 ◽  
Author(s):  
Ali Mirzaei ◽  
Maryam Bonyani ◽  
Shahab Torkian ◽  
Mahdi Feizpour ◽  
Anna Bonavita ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Gas Sensing ◽  
Thick Films ◽  
Sol Gel ◽  
X Ray Diffraction ◽  
Sensing Properties ◽  
Sensing Applications ◽  
Transmission Electron ◽  
Gas Sensing Properties ◽  
Underlying Mechanisms

In this work, Fe2O3 nanoparticles (NPs) were successfully synthesized by Pechini sol-gel method. Scanning electron microscopy, transmission electron microscopy and X-ray diffraction characterizations were used to study the morphology and crystal structure of the synthesized products. The electrical and gas sensing behaviour of the synthesized and commercial Fe2O3 samples, prepared in the form of thick films, were studied. Though the commercial Fe2O3 powders had lower resistance but it was found that the synthesized Fe2O3 NPs had better gas sensing properties. The underlying mechanisms are discussed in details. The present findings show advantages of Fe2O3 NPs over micro-size particles for gas sensing applications.

Preparation and Property of Lanthanum Ferrite Formaldehyde Gas Sensor Modified by Carbon Nanotubes and Silver

2013 ◽  
Vol 320 ◽  
pp. 554-557 ◽  
Author(s):  
Yu Min Zhang ◽  
Yu Tao Lin ◽  
Jin Zhang ◽  
Zhong Qi Zhu ◽  
Qiang Liu ◽  
...  
Keyword(s):  
Carbon Nanotubes ◽  
Chemical Synthesis ◽  
Recovery Time ◽  
Gas Sensing ◽  
Operating Temperature ◽  
Sol Gel ◽  
Lanthanum Ferrite ◽  
Gas Sensing Properties ◽  
Response And Recovery ◽  
Sensitive Property

Our previous study revealed that the gas sensitive property of Silver-modified Lanthanum Ferrite (Ag-LaFeO3) is well, but the operating temperature is still high and the sensitivity also needs to be improved. This work based on our previous study. Ag-LaFeO3 was further modified by the Carbon nanoTubes (CNTs). The Ag-LaFeO3 powder modified with CNTs (CNTs-Ag-LaFeO3) was prepared by a sol-gel method combined with microwave chemical synthesis. The structure and gas-sensing properties were investigated. The results show that the structure of CNTs-Ag-LaFeO3 is of orthogonal perovskite. The sensitivity of 0.75% CNTs-Ag-LaFeO3 powder for 1 ppm formaldehyde is 13 at 86°C. The response and recovery time are 100s and 60s, respectively. Moreover, the sensor also has an obvious response for 1ppm formaldehyde at 58°C.

Xylene-sensing of Fe2(MoO4)3 nanoplates prepared via a hydrothermal method

2017 ◽  
Vol 10 (03) ◽  
pp. 1750022 ◽  
Author(s):  
Mengying Xu ◽  
Zhidong Lin ◽  
Wenying Guo ◽  
Yuyuan Hong ◽  
Ping Fu ◽  
...  
Keyword(s):  
Gas Sensors ◽  
Gas Sensing ◽  
Operating Temperature ◽  
Hydrothermal Process ◽  
Optimum Operating ◽  
Average Crystalline Size ◽  
Optimum Operating Temperature ◽  
Recovery Times ◽  
Response And Recovery ◽  
Simple Hydrothermal Process

Fe2(MoO4)3 nanoplates were prepared via a simple hydrothermal process. The average crystalline size of these nanoplates is 85.8[Formula: see text]nm. The sensor based on Fe2(MoO4)3 shows a high gas sensing performance to xylene. The response of Fe2(MoO4)3 sensor is 25.9–100[Formula: see text]ppm xylene at optimum operating temperature of 340[Formula: see text]C. The response and recovery times to 100[Formula: see text]ppm xylene are 4 and 10[Formula: see text]s, respectively. Furthermore, the Fe2(MoO4)3 sensor exhibits remarkable selectivity detection of xylene gas with negligible responses to toluene and benzene. Therefore, the Fe2(MoO4)3 is a promising material for the detection of xylene gas sensors.

scholarly journals Discriminable Sensing Response Behavior to Homogeneous Gases Based on n-ZnO/p-NiO Composites

Nanomaterials ◽  
2020 ◽  
Vol 10 (4) ◽  
pp. 785 ◽  
Author(s):  
Wen-Dong Zhou ◽  
Davoud Dastan ◽  
Jing Li ◽  
Xi-Tao Yin ◽  
Qi Wang
Keyword(s):  
Gas Sensors ◽  
Gas Sensing ◽  
Sol Gel ◽  
High Sensitivity ◽  
Oxide Semiconductor ◽  
Sensing Properties ◽  
Gas Sensing Properties ◽  
P Type ◽  
Type Response ◽  
Properties Of Composites

Metal oxide semiconductor (MOS) gas sensors have the advantages of high sensitivity, short response-recovery time and long-term stability. However, the shortcoming of poor discriminability of homogeneous gases limits their applications in gas sensors. It is well-known that the MOS materials have similar gas sensing responses to homogeneous gases such as CO and H2, so it is difficult for these gas sensors to distinguish the two gases. In this paper, simple sol–gel method was employed to obtain the ZnO–xNiO composites. Gas sensing performance results illustrated that the gas sensing properties of composites with x > 0.425 showed a p-type response to both CO and H2, while the gas sensing properties of composites with x < 0.425 showed an n-type response to both CO and H2. However, it was interesting that ZnO–0.425NiO showed a p-type response to CO but an discriminable response (n-type) to H2, which indicated that modulating the p-type or n-type semiconductor concentration in p-n composites could be an effective method with which to improve the discriminability of this type of gas sensor regarding CO and H2. The phenomenon of the special gas sensing behavior of ZnO–0.425NiO was explained based on the experimental observations and a range of characterization techniques, including XRD, HRTEM and XPS, in detail.

scholarly journals Enhanced Methane Sensing Properties of WO3 Nanosheets with Dominant Exposed (200) Facet via Loading of SnO2 Nanoparticles

Nanomaterials ◽  
2019 ◽  
Vol 9 (3) ◽  
pp. 351 ◽  
Author(s):  
Dongping Xue ◽  
Junjun Wang ◽  
Yan Wang ◽  
Guang Sun ◽  
Jianliang Cao ◽  
...  
Keyword(s):  
Gas Sensing ◽  
Defect Density ◽  
Sno2 Nanoparticles ◽  
High Reactivity ◽  
Optimum Operating ◽  
Optimum Operating Temperature ◽  
Sensing Properties ◽  
Long Term Stability ◽  
Subsequent Calcination

Methane detection is extremely difficult, especially at low temperatures, due to its high chemical stability. Here, WO3 nanosheets loaded with SnO2 nanoparticles with a particle size of about 2 nm were prepared by simple impregnation and subsequent calcination using SnO2 and WO3·H2O as precursors. The response of SnO2-loaded WO3 nanosheet composites to methane is about 1.4 times higher than that of pure WO3 at the low optimum operating temperature (90 °C). Satisfying repeatability and long-term stability are ensured. The dominant exposed (200) crystal plane of WO3 nanosheets has a good balance between easy oxygen chemisorption and high reactivity at the dangling bonds of W atoms, beneficial for gas-sensing properties. Moreover, the formation of a n–n type heterojunction at the SnO2-WO3 interface and additionally the increase of specific surface area and defect density via SnO2 loading enhance the response further. Therefore, the SnO2-WO3 composite is promising for the development of sensor devices to methane.

Sign in / Sign up

Export Citation Format

Share Document