Interfacial Microstructure and Bonding Properties of Plasma-Sprayed Multilayer Ceramic Coating (Al2O3/BaTiO3/Al2O3-40 wt.% TiO2)

2020 ◽  
Vol 29 (8) ◽  
pp. 2012-2025
Author(s):  
Li Zhou ◽  
Zhi-guo Xing ◽  
Hai-dou Wang ◽  
Peng-fei He ◽  
Qing-bo Mi ◽  
...  
Keyword(s):  
Ceramic Coating ◽  
Interfacial Microstructure ◽  
Bonding Properties ◽  
Multilayer Ceramic ◽  
Plasma Sprayed

scholarly journals Microstructure and Wear Behavior of Plasma-Sprayed TiO2–SiAlON Ceramic Coating

Coatings ◽  
2020 ◽  
Vol 10 (12) ◽  
pp. 1268
Author(s):  
Yun Wang ◽  
Weichao Wan ◽  
Junhong Mao ◽  
Lihui Tian ◽  
Ruitao Li
Keyword(s):  
Ceramic Coating ◽  
Wear Behavior ◽  
Rutile Phase ◽  
Atmospheric Plasma ◽  
Tio2 Anatase ◽  
Sialon Ceramic ◽  
Mating Surface ◽  
Starved Lubrication ◽  
Plasma Sprayed ◽  
Lubrication Conditions

In this study, atmospheric plasma spray was employed to deposit TiO2–SiAlON ceramic coating on 316 stainless steel. The phases and microstructure of the ceramic coating were investigated. Additionally, comparative studies on the tribological performances of the substrate and the ceramic coating, under both dry and starved lubrication conditions, were carried out. The SiAlON phase was preserved, while partial TiO2 anatase was transformed to rutile phase. The wear rate of the coating was roughly 1/3 of that of the substrate under both conditions. The wear mechanisms of the ceramic coating were surface fracture and abrasive wear in both cases, and the coating under starved lubrication underwent less abrasion. The pores in the coating served as micro-reservoirs, forming an oil layer on the mating surface, and improving tribological properties during sliding.

Interaction of a Crack in the Plasma-Sprayed Ceramic Coating with the Metal Substrate

2005 ◽  
Vol 482 ◽  
pp. 223-226
Author(s):  
Luboš Náhlík ◽  
Zdeněk Knésl ◽  
F. Kroupa
Keyword(s):  
Fracture Toughness ◽  
Fracture Mechanics ◽  
Surface Crack ◽  
Ceramic Coating ◽  
Ceramic Coatings ◽  
Metal Substrate ◽  
High Density ◽  
Initial Surface ◽  
Young’S Moduli ◽  
Plasma Sprayed

Plasma-sprayed ceramic coatings contain a high density of intrasplat microcracks which are responsible for small Young’s moduli and low fracture toughness. The extension of an initial surface crack in the direction to the interface, where the crack is repelled by the metal substrate with higher Young’s modulus, is studied using the methods of fracture mechanics. It is shown that high tensile stresses induced by the crack in the interface can lead to a local decohesion along the interface so that the crack can deviate into the interface.

scholarly journals A Comparison between CoNiCrAlY Bond Coat and Zirconia Plasma Sprayed Coatings on Creep Tests

2008 ◽  
Vol 591-593 ◽  
pp. 30-35
Author(s):  
Danieli A.P. Reis ◽  
Carlos de Moura Neto ◽  
Antônio Augusto Couto ◽  
Cosme Roberto Moreira Silva ◽  
Francisco Piorino Neto ◽  
...  
Keyword(s):  
Bond Coat ◽  
Ceramic Coating ◽  
Constant Load ◽  
Creep Tests ◽  
Engineering Ceramic ◽  
Wide Range ◽  
Plasma Sprayed Coatings ◽  
Plasma Sprayed ◽  
Engine Components ◽  
Sprayed Coatings

Thermomechanical and electrical properties of zirconia-based ceramics have led to a wide range of advanced and engineering ceramic applications like solid electrolyte in oxygen sensors, fuel cells and furnace elements and its low thermal conductivity has allowed its use for thermal barrier coatings for aerospace engine components. A comparison between CoNiCrAlY bond coat and zirconia plasma sprayed coatings on creep tests of the Ti-6Al-4V alloy was studied. The material used was commercial Ti-6Al-4V alloy. Yttria (8 wt.%) stabilized zirconia (YSZ) with a CoNiCrAlY bond coat was atmospherically plasma sprayed on Ti-6Al-4V substrates by Sulzer Metco Type 9 MB. Constant load creep tests were conducted on a standard creep machine in air on coated samples, at stress levels of 520 MPa at 500°C to evaluate the oxidation protection on creep of the Ti-6Al-4V alloy. Results indicate that the creep resistance of the ceramic coating was greater than metallic coating.

Influence of Surface Microstructure of Ceramic Coatings on the Initiation and Development of Scuffing Phenomena

1998 ◽  
Author(s):  
B. Antoszewski ◽  
W. Zorawski
Keyword(s):  
Friction Force ◽  
Ceramic Coating ◽  
Ceramic Coatings ◽  
Surface Microstructure ◽  
Frictional Pair ◽  
Plasma Sprayed ◽  
Thermally Sprayed

Abstract This paper deals with findings of experiments concerning the scuffing phenomenon in case the frictional pair is embodying an element with a thermally sprayed ceramic coating. The progress of building up of seizure is related and evaluated for a set of ceramic coatings embodying a diversity of granulations of Al2O3TiO2 and Cr2O3 plasma sprayed on steel, the IHI8N9T steel and carbon-graphite when tested on a roller-block machine. The greatest antiscuffing resistance was recorded for Cr2O3/carbon-graphite pair. An analysis of regression approximating friction force was carried through.

Characterization of Plasma-Sprayed Ceramic Coating Layers for Melting Crucible of Metal Fuels

2017 ◽  
Vol 17 (11) ◽  
pp. 8598-8602
Author(s):  
Ki-Hwan Kim ◽  
Song Hoon ◽  
Jong-Hwan Kim ◽  
Ki-Won Hong ◽  
Jeong-Yong Park
Keyword(s):  
Ceramic Coating ◽  
Melting Crucible ◽  
Coating Layers ◽  
Plasma Sprayed

Thermal Analysis of Ceramic Coated Aluminium Piston with Slots

2014 ◽  
Vol 592-594 ◽  
pp. 786-790
Author(s):  
M.R. Chitthaarth ◽  
K. Manivannan
Keyword(s):  
Thermal Analysis ◽  
Thermal Expansion ◽  
Coating Thickness ◽  
Ceramic Coating ◽  
Working Condition ◽  
Middle Layer ◽  
Piston Crown ◽  
Alsi Alloy ◽  
Aluminium Piston ◽  
Plasma Sprayed

The main aim is to control thermal expansion in aluminium piston at high working condition. A plasma sprayed ceramic coating (TBC) is applied on the piston crown as a top coat and NiCrAl is applied as the middle layer as bond coat to improve the addition strength between the top coat and the metal subtract layer as AlSi alloy; we introduce a thermal slot on the piston shrink to regulate the heat flow in piston and make it cooler. We analyse the piston with these two implementations to determine the thermal analysis of the piston. The results can be shown in the various comparisons of coating thickness of top coat with thermal slots on the piston shrink. Increase in coating thickness reduces the stress in the coatings. It is observed that 85°C increase in 0.8mm coat than the ordinary piston.

Application of Laser Hybrid Process to the Plasma Sprayed Ceramic Coating

2000 ◽  
Vol 2000 (0) ◽  
pp. 349-350
Author(s):  
Sang Ok CHWA ◽  
Naoki HIRAI ◽  
Akira OHMORI ◽  
Souta MATSUSAKA ◽  
Hui YANG
Keyword(s):  
Ceramic Coating ◽  
Hybrid Process ◽  
Laser Hybrid ◽  
Plasma Sprayed

Thermal Barrier Effects Comparison of Plasma-Sprayed and Laser-Remelted Al2O3-13 % TiO2 Ceramic Coatings

2014 ◽  
Vol 978 ◽  
pp. 40-43
Author(s):  
Dong Sheng Wang ◽  
Guang Qu ◽  
Jin Lan Su
Keyword(s):  
Ceramic Coating ◽  
Ceramic Coatings ◽  
Nanostructured Coating ◽  
Thermal Barrier ◽  
Heat Current ◽  
Barrier Effect ◽  
Laser Remelting ◽  
Plasma Sprayed ◽  
Sprayed Coatings ◽  
Conventional Coating

Conventional and nanosturctured Al2O3–13 wt% TiO2ceramic coatings were deposited by plasma spraying on TiAl alloy surface. Laser remelting experiment on as-sprayed coatings was carried out and the influences of laser remelting on microstructure and thermal barrier effect of the coating were researched. The results show that the as-sprayed conventional coating has a typical plasma-sprayed lamellar-like structure, while the nanostructured coating consisted of both fully melted regions and partially melted regions. The laser-remelted conventional coating exhibits column-like crystals which grew along the direction of the heat current, while the nanostructured coating composed of fine equiaxed grains with some remained nanoparticles. The nanostructured ceramic coating has higher thermal barrier effect than the conventional ceramic coating does. The thermal barrier effect of the as-sprayed coatings decreases after laser remelting.

Sign in / Sign up

Export Citation Format

Share Document