Experimental Study on Breakage Characteristics and Energy Dissipation of the Crushed Rock Grains

Author(s):  
Luzhen Wang ◽  
Minggan Yin ◽  
Hailing Kong ◽  
Hualei Zhang
Author(s):  
Yong Wang ◽  
Huanjun Jiang ◽  
Chen Wu ◽  
Zihui Xu ◽  
Zhiyuan Qin

<p>Suspended ceiling systems (SCSs) experienced severe damage during strong earthquakes that occurred in recent years. The capacity of the ceiling component is a crucial factor affecting the seismic performance of SCS. Therefore, a series of static tests on suspended ceiling components under monotonic and cyclic loadings were carried out to investigate the seismic performance of the ceiling components. The ceiling components include main tee splices, cross tee latches and peripheral attachments. All specimens were tested under axial loading. Additionally, the static tests of cross tee latches subjected to shear and bending loadings were performed due to their seismic vulnerability. The failure pattern, load-carrying ability, deformation capacity and energy dissipation of the ceiling components are presented in detail in this study.</p>


2021 ◽  
Vol 5 (2) ◽  
pp. 155-165
Author(s):  
Bashir Tanimu ◽  
Aliyu Bamaiyi Usman ◽  
Al-Amin Danladi Bello ◽  
Sulaiman Jamilu Abdullahi

This research study the experimental performance of broad-crested weir with single-step by introducing U/S and D/S round-nose and  analysing the parameters that have effect on the shape of the step and their effects on the flow characteristics and energy dissipation (E%) downstream (D/S) of the weir. Furthermore, empirical relations for E% and flow rate due to the influencing factors were derived. The results showed that the weir model with  = 1.000 gives a higher E% in comparison with other weir models. Flow regimes were observed i.e nappe flow for small discharges, transition flow for intermediate discharges and skimming flow for higher discharges. Two model equations were obtained, the first to dteremine the flow rate over the weir models and the second relation to estimate E% in terms of, and Froude number. The model () can be used in the design of prototype weirs in terms of energy dissipation


2013 ◽  
Vol 680 ◽  
pp. 234-238
Author(s):  
Jin Li Qiao ◽  
Wen Ling Tian ◽  
Ming Jie Zhou ◽  
Fang Lu Jiang ◽  
Kun Zhao

In order to validate the seismic performance of reinforced concrete grid-mesh frame wall , four grid frame walls in half size is made with different height-width ratios and different grid forms in the paper. Two of them are filling with cast-in-place plaster as filling material. According to the experimental results of these four walls subjected to horizontal reciprocating loads, we know that the grid-mesh frame wall's breaking form are in stages and multiple modes, and the main influencing factors are height-width ratio and grid form, what's more, with cast-in-place plaster as fill material, could not only improve the level of the wall bearing capacity and stiffness, but also improve the ductility and seismic energy dissipation capacity.


2011 ◽  
pp. 105-111 ◽  
Author(s):  
S Erpicum ◽  
O Machiels ◽  
P Archambeau ◽  
B Dewals ◽  
M Pirotton ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document