Life extension analysis of high speed ball bearing based on multi-parameter coupling

2021 ◽  
Vol 35 (4) ◽  
pp. 1569-1581
Author(s):  
Guang Zeng ◽  
Chunjiang Zhao ◽  
Xiaokai Yu ◽  
Qiang Bian ◽  
Zhigang Xiao ◽  
...  
Keyword(s):  
High Speed ◽  
Ball Bearing ◽  
Life Extension ◽  
Parameter Coupling ◽  
Extension Analysis

Ball bearing turbocharger vibration management: application on high speed balancer

2020 ◽  
Vol 21 (6) ◽  
pp. 619
Author(s):  
Kostandin Gjika ◽  
Antoine Costeux ◽  
Gerry LaRue ◽  
John Wilson
Keyword(s):  
Dynamic Behavior ◽  
High Speed ◽  
Internal Combustion Engines ◽  
Ball Bearing ◽  
Squeeze Film ◽  
Design And Technology ◽  
Squeeze Film Damper ◽  
Damping Coefficients ◽  
Bearing Loads ◽  
Stiffness And Damping

Today's modern internal combustion engines are increasingly focused on downsizing, high fuel efficiency and low emissions, which requires appropriate design and technology of turbocharger bearing systems. Automotive turbochargers operate faster and with strong engine excitation; vibration management is becoming a challenge and manufacturers are increasingly focusing on the design of low vibration and high-performance balancing technology. This paper discusses the synchronous vibration management of the ball bearing cartridge turbocharger on high-speed balancer and it is a continuation of papers [1–3]. In a first step, the synchronous rotordynamics behavior is identified. A prediction code is developed to calculate the static and dynamic performance of “ball bearing cartridge-squeeze film damper”. The dynamic behavior of balls is modeled by a spring with stiffness calculated from Tedric Harris formulas and the damping is considered null. The squeeze film damper model is derived from the Osborne Reynolds equation for incompressible and synchronous fluid loading; the stiffness and damping coefficients are calculated assuming that the bearing is infinitely short, and the oil film pressure is modeled as a cavitated π film model. The stiffness and damping coefficients are integrated on a rotordynamics code and the bearing loads are calculated by converging with the bearing eccentricity ratio. In a second step, a finite element structural dynamics model is built for the system “turbocharger housing-high speed balancer fixture” and validated by experimental frequency response functions. In the last step, the rotating dynamic bearing loads on the squeeze film damper are coupled with transfer functions and the vibration on the housings is predicted. The vibration response under single and multi-plane unbalances correlates very well with test data from turbocharger unbalance masters. The prediction model allows a thorough understanding of ball bearing turbocharger vibration on a high speed balancer, thus optimizing the dynamic behavior of the “turbocharger-high speed balancer” structural system for better rotordynamics performance identification and selection of the appropriate balancing process at the development stage of the turbocharger.

Recent Patents on the Angular Contact Ball Bearing of High-Speed Motorized Spindle

2020 ◽  
Vol 13 ◽  
Author(s):  
Yudong Bao ◽  
Linkai Wu ◽  
Yanling Zhao ◽  
Chengyi Pan
Keyword(s):  
High Speed ◽  
Ball Bearing ◽  
Rapid Development ◽  
Ceramic Materials ◽  
Development Trend ◽  
Numerical Control ◽  
Angular Contact Ball Bearing ◽  
Practical Applications ◽  
High Speed Cutting ◽  
Advantages And Disadvantages

Background:: Angular contact ball bearings are the most popular bearing type used in the high speed spindle for machining centers, The performance of the bearing directly affects the machining efficiency of the machine tool, Obtaining a higher value is the direction of its research and development. Objective:: By analyzing the research achievements and patents of electric spindle angular contact bearings, summarizing the development trend provides a reference for the development of electric spindle bearings. Methods:: Through the analysis of the relevant technology of the electric spindle angular contact ball bearing, the advantages and disadvantages of the angular contact ball bearing are introduced, and the research results are combined with the patent analysis. Results:: With the rapid development of high-speed cutting and numerical control technology and the needs of practical applications, the spindle requires higher and higher speeds for bearings. In order to meet the requirements of use, it is necessary to improve the bearing performance by optimizing the structure size and improving the lubrication conditions. Meanwhile, reasonable processing and assembly methods will also have a beneficial effect on bearing performance. Conclusion:: With the continuous deepening of bearing technology research and the use of new structures and ceramic materials has made the bearing's limit speed repeatedly reach new highs. The future development trend of high-speed bearings for electric spindles is environmental protection, intelligence, high speed, high precision and long life.

Temperature Rise Prediction of Oil-Air Lubricated Angular Contact Ball Bearings Using Artificial Neural Network

2019 ◽  
Vol 12 (3) ◽  
pp. 248-261
Author(s):  
Baomin Wang ◽  
Xiao Chang
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Temperature Rise ◽  
High Speed ◽  
Ball Bearing ◽  
Influence Factors ◽  
Ball Bearings ◽  
Ann Model ◽  
Angular Contact Ball Bearing ◽  
Artificial Neural

Background: Angular contact ball bearing is an important component of many high-speed rotating mechanical systems. Oil-air lubrication makes it possible for angular contact ball bearing to operate at high speed. So the lubrication state of angular contact ball bearing directly affects the performance of the mechanical systems. However, as bearing rotation speed increases, the temperature rise is still the dominant limiting factor for improving the performance and service life of angular contact ball bearings. Therefore, it is very necessary to predict the temperature rise of angular contact ball bearings lubricated with oil-air. Objective: The purpose of this study is to provide an overview of temperature calculation of bearing from many studies and patents, and propose a new prediction method for temperature rise of angular contact ball bearing. Methods: Based on the artificial neural network and genetic algorithm, a new prediction methodology for bearings temperature rise was proposed which capitalizes on the notion that the temperature rise of oil-air lubricated angular contact ball bearing is generally coupling. The influence factors of temperature rise in high-speed angular contact ball bearings were analyzed through grey relational analysis, and the key influence factors are determined. Combined with Genetic Algorithm (GA), the Artificial Neural Network (ANN) model based on these key influence factors was built up, two groups of experimental data were used to train and validate the ANN model. Results: Compared with the ANN model, the ANN-GA model has shorter training time, higher accuracy and better stability, the output of ANN-GA model shows a good agreement with the experimental data, above 92% of bearing temperature rise under varying conditions can be predicted using the ANNGA model. Conclusion: A new method was proposed to predict the temperature rise of oil-air lubricated angular contact ball bearings based on the artificial neural network and genetic algorithm. The results show that the prediction model has good accuracy, stability and robustness.

scholarly journals Sound Noise Generated from Ball Bearing in High Speed Rotation

1978 ◽  
Vol 21 (158) ◽  
pp. 1306-1310 ◽  
Author(s):  
Akio NAGAMATSU ◽  
Masaho FUKUDA
Keyword(s):  
High Speed ◽  
Ball Bearing ◽  
High Speed Rotation ◽  
Speed Rotation

Prediction of Ball Motion in High-Speed Thrust-Loaded Ball Bearings

1976 ◽  
Vol 98 (3) ◽  
pp. 463-469 ◽  
Author(s):  
C. R. Gentle ◽  
R. J. Boness
Keyword(s):  
Computer Program ◽  
High Speed ◽  
Ball Bearing ◽  
Viscoelastic Behavior ◽  
Specific Situation ◽  
Fluid Models ◽  
Ball Bearings ◽  
Theoretical Predictions ◽  
Ball Motion

This paper describes the development of a computer program used to analyze completely the motion of a ball in a high-speed, thrust-loaded ball bearing. Particular emphasis is paid to the role of the lubricant in governing the forces and moments acting on each ball. Expressions for these forces due to the rolling and sliding of the ball are derived in the light of the latest fluid models, and estimates are also made of the cage forces applicable in this specific situation. It is found that only when lubricant viscoelastic behavior is considered do the theoretical predictions agree with existing experimental evidence.

An improved model for investigating the vibration characteristics of ball bearing owing to outer race waviness under high speed

2021 ◽  
Vol 69 (2) ◽  
pp. 89-101
Author(s):  
Pingping Hou ◽  
Liqin Wang ◽  
Zhijie Xie ◽  
Qiuyang Peng
Keyword(s):  
High Speed ◽  
Ball Bearing ◽  
Vibration Measurement ◽  
Vibration Frequencies ◽  
Outer Race ◽  
Response Characteristics ◽  
Lagrange’S Equation ◽  
Rolling Elements ◽  
Initial Clearance ◽  
Improved Model

In this study, an improved model for a ball bearing is established to investigate the vibration response characteristics owing to outer race waviness under an axial load and high speed. The mathematical ball bearing model involves the motions of the inner ring, outer ring, and rolling elements in the radial XY plane and axial z direction. The 2Nb + 5 nonlinear differential governing equations of the ball bearing are derived from Lagrange's equation. The influence of rotational speed and outer race waviness is considered. The outer race waviness is modeled as a superposition of sinusoidal function and affects both the contact deformation between the outer raceway and rolling elements and initial clearance. The MATLAB stiff solver ODE is utilized to solve the differential equations. The simulated results show that the axial vibration frequency occurred at l fc and the radial vibration frequencies appeared at l fc fc when the outer race waviness of the order (l) was the multiple of the number of rolling elements (k Nb) and that the principal vibration frequencies were observed at l fc fc in the radial x direction when the outer race waviness of the order (l) was one higher or one lower than the multiple of the number of rolling elements (k Nb 1). At last, the validity of the proposed ball bearing model was verified by the high-speed vibration measurement tests of ball bearings.

Direct Outer Ring Cooling of a High Speed Jet Engine Mainshaft Ball Bearing: Experimental Investigation Results

2010 ◽  
Author(s):  
Peter Gloeckner ◽  
Klaus Dullenkopf ◽  
Michael Flouros
Keyword(s):  
Power Dissipation ◽  
High Speed ◽  
Ball Bearing ◽  
Operating Conditions ◽  
Outer Ring ◽  
Outer Diameter ◽  
Propulsion Systems ◽  
Jet Engine ◽  
Power Loss Reduction ◽  
The Impact

Operating conditions in high speed mainshaft ball bearings applied in new aircraft propulsion systems require enhanced bearing designs and materials. Rotational speeds, loads, demands on higher thrust capability, and reliability have increased continuously over the last years. A consequence of these increasing operating conditions are increased bearing temperatures. A state of the art jet engine high speed ball bearing has been modified with an oil channel in the outer diameter of the bearing. This oil channel provides direct cooling of the outer ring. Rig testing under typical flight conditions has been performed to investigate the cooling efficiency of the outer ring oil channel. In this paper the experimental results including bearing temperature distribution, power dissipation, bearing oil pumping and the impact on oil mass and parasitic power loss reduction are presented.

Oil Pumping in High Speed and High Loaded Ball Bearings

2004 ◽  
Author(s):  
Michael Flouros
Keyword(s):  
High Speed ◽  
Ball Bearing ◽  
Research Programme ◽  
Aircraft Engine ◽  
Ball Bearings ◽  
European Research ◽  
Rolling Bearings ◽  
Engine Design ◽  
Oil Flow ◽  
Total Oil

Trends in aircraft engine design cause increased mechanical stress requirements for rolling bearings. Consequently high amounts of heat are rejected which results in high oil scavenge temperatures. The direction of oil flow in the bearing can considerably affect the heat transported by the oil. An RB199 turbofan bearing and its associated chamber were modified to carry out the survey. The test bearing was a 124mm PCD ball bearing. The bearing has a split inner-ring employing under-race lubrication by two individual jets. The total oil flow could be devided to any ratio through the jets. This had an impact on the oil scavenge temperatures and the scavenge flows on both sides of the bearing. Significant reduction in the ‘heat to oil’ was achieved when oil was fed at certain proportions (ratio). This work is part of the European Research programme Brite Euram ATOS (Advanced Transmission and Oil Systems).

Sign in / Sign up

Export Citation Format

Share Document