Temperature Rise Prediction of Oil-Air Lubricated Angular Contact Ball Bearings Using Artificial Neural Network

2019 ◽  
Vol 12 (3) ◽  
pp. 248-261
Author(s):  
Baomin Wang ◽  
Xiao Chang
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Temperature Rise ◽  
High Speed ◽  
Ball Bearing ◽  
Influence Factors ◽  
Ball Bearings ◽  
Ann Model ◽  
Angular Contact Ball Bearing ◽  
Artificial Neural

Background: Angular contact ball bearing is an important component of many high-speed rotating mechanical systems. Oil-air lubrication makes it possible for angular contact ball bearing to operate at high speed. So the lubrication state of angular contact ball bearing directly affects the performance of the mechanical systems. However, as bearing rotation speed increases, the temperature rise is still the dominant limiting factor for improving the performance and service life of angular contact ball bearings. Therefore, it is very necessary to predict the temperature rise of angular contact ball bearings lubricated with oil-air. Objective: The purpose of this study is to provide an overview of temperature calculation of bearing from many studies and patents, and propose a new prediction method for temperature rise of angular contact ball bearing. Methods: Based on the artificial neural network and genetic algorithm, a new prediction methodology for bearings temperature rise was proposed which capitalizes on the notion that the temperature rise of oil-air lubricated angular contact ball bearing is generally coupling. The influence factors of temperature rise in high-speed angular contact ball bearings were analyzed through grey relational analysis, and the key influence factors are determined. Combined with Genetic Algorithm (GA), the Artificial Neural Network (ANN) model based on these key influence factors was built up, two groups of experimental data were used to train and validate the ANN model. Results: Compared with the ANN model, the ANN-GA model has shorter training time, higher accuracy and better stability, the output of ANN-GA model shows a good agreement with the experimental data, above 92% of bearing temperature rise under varying conditions can be predicted using the ANNGA model. Conclusion: A new method was proposed to predict the temperature rise of oil-air lubricated angular contact ball bearings based on the artificial neural network and genetic algorithm. The results show that the prediction model has good accuracy, stability and robustness.

Forecasting of Cutting Forces in Dental Adjustment of Ceramic Prostheses Using an Artificial Neural Network

2010 ◽  
Vol 152-153 ◽  
pp. 1687-1690
Author(s):  
Jian Hui Peng ◽  
Xiao Fei Song ◽  
Ling Yin
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Cutting Forces ◽  
High Speed ◽  
Cutting Process ◽  
Computer Assisted ◽  
Ann Model ◽  
Operational Parameters ◽  
Artificial Neural

Intraoral adjustment of ceramic prostheses involving cutting process is a central procedure in restorative dentistry because the quality of ceramic prostheses depends on the cutting process. In this paper, an artificial neural network (ANN) model was developed for the first time to forecast the dynamic forces in dental cutting process as functions of clinical operational parameters. The predicted force values were compared with the measured values in in vitro dental cutting of porcelain prostheses obtained using a novel two-degrees-of-freedom computer-assisted testing apparatus with a high-speed dental handpiece and diamond burs. The results indicate that there existed nonlinear relationships between the cutting forces and clinical operational parameters. It is found that the ANN-forecasted forces were in good agreement with the experiment-measured values. This indicates that the established ANN model can provide insights into the force-related process assessment and forecast for clinical dental cutting of ceramic prostheses.

scholarly journals Adsorptive removal of dairy industrial pollutants by chitosan zinc –oxide nanoadsorbent- A comparitive study of artificial neural network and quadratic Box-Behnken design

2021 ◽  
Vol 42 (6) ◽  
pp. 1442-1451
Author(s):  
B.L. Dinesha ◽  
◽  
S. Hiregoudar ◽  
U. Nidoni ◽  
K.T. Ramappa ◽  
...  
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Zinc Oxide ◽  
High Speed ◽  
Oxygen Demand ◽  
Effluent Treatment ◽  
Precipitation Method ◽  
Ann Model ◽  
Operational Parameters ◽  
Artificial Neural

Aim: To investigate the effect of operational parameters on the adsorption of biological oxygen demand (BOD) and chemical oxygen demand (COD) on to Chitosan zinc oxide (CZnO) nanoadsorbent using cost-effective and eco-friendly nanoadsorbent based effluent treatment processes. Methodology: CZnO nanoadsorbent particle was synthesized using chemical precipitation method. The nano size <100 nm was achieved using high-speed cryo all mill, followed by the characterization using high-end instruments such as scanning electron microscope with elemental detection sensor (SEM-EDS), atomic force microscope (AFM), X-ray diffractometer (XRD) and Fourier transform inform infrared spectroscopy (FT-IR). Modeling and optimization of operational parameters were done with the artificial neural network (ANN) and Box-BehnkenDesign (BBD) statistical tools. Results: Optimized treatment combination for adsorption of BOD and COD were found at initial BOD and COD concentration of 100 and 200 mg l−1, pH of 7.0 and 2.0, adsorbent dosage of 1.25 mg l−1, contact time of 100 and 60 min. In these conditionsthe desirability values of 0.988 and 0.950 were found for BOD and COD adsorption. The maximum per cent reduction of BOD and COD by using CZnO nanoadsorbent was found to be 96.71 and 87.56. Two models such as Quadratic Box-Behnken and ANN were compared in term of sum of square errors (SSE), root mean square error (RMSE) and correlation coefficient (R2) values. Interpretation: The results obtained revel the well trained ANN model found to be more accurate in prediction of BOD and COD adsorption process parameters compared to BBD model.

scholarly journals Optimizing the Rail Profile for High-Speed Railways Based on Artificial Neural Network and Genetic Algorithm Coupled Method

2020 ◽  
Vol 12 (2) ◽  
pp. 658
Author(s):  
Hanwen Jiang ◽  
Liang Gao
Keyword(s):  
Neural Network ◽  
Genetic Algorithm ◽  
Artificial Neural Network ◽  
High Speed ◽  
Sustainable Transportation ◽  
Ann Model ◽  
Coupled Method ◽  
Rail Wear ◽  
Wide Range ◽  
Artificial Neural

Though the high-speed railways are seen as a sustainable form of transportation, the fact that the rail wear in high-speed railways negatively affects the running safety and riding comfort, as well as the maintenance of railways, has drawn a wide range of concerns among researchers and scholars. In order to reduce the rail wear and achieve the goal of sustainable transportation, this paper proposes an ingenious optimization program of rail profiles based on the artificial neural network (ANN) and genetic algorithm (GA) coupled method. The candidate solutions of the nonlinear GA programming model are regarded as the inputs of the trained ANN model. Meanwhile, the outputs of the trained ANN model serve as the objective functions of the GA model. The computational results show that the optimized rail profile not only has superior performances in terms of the wheel/rail wear and contact conditions, but also maintains good dynamic performances. Therefore, this study can provide the theoretical and practical basis for the design and the preventive grinding of rails in the high-speed railways. Also, the ANN-GA coupled model can be extended and further employed on the optimization of other rail profiles.

scholarly journals The Effect of Machining Parameters and Optimization of Temperature Rise in Turning Operation of Aluminium-6061 Using RSM and Artificial Neural Network

2021 ◽  
Author(s):  
Mahesh Gopal
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Temperature Rise ◽  
Cutting Speed ◽  
Tool Geometry ◽  
Machining Parameters ◽  
Ann Model ◽  
Turning Operation ◽  
Artificial Neural ◽  
Coated Carbide

The aim of this study is to determine the effect of the machining parameters and tool geometry. The turning operation is carried out as per the Design of Experiments (DoE) of Response Surface Methodology (RSM) to predict the temperature rise of aluminium-6061 as a cutting material and Al2O3 coated carbide tool is used as a cutting tool for turning operation. The ANOVA analysis is used to measure the performance quality and mathematical model is developed. The values of probability >(F) is less than 0.05 indicates, the model conditions are significant. The cutting speed is the most influencing parameters compared to other parameters. For the optimum machining parameters leading to temperature rise, the Artificial Neural Network (ANN) model is trained and tested using MAT Lab software. The ANN recommends best minimum predicted value of temperature rise. The confirmatory analysis results, the predicted values were found to be in commendable agreement with the experimental values.

scholarly journals Artificial neural network, predictor variables and sensitivity threshold for DNA methylation-based age prediction using blood samples

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Zhonghui Thong ◽  
Jolena Ying Ying Tan ◽  
Eileen Shuzhen Loo ◽  
Yu Wei Phua ◽  
Xavier Liang Shun Chan ◽  
...  
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Regression Model ◽  
Sensitivity Threshold ◽  
Ann Model ◽  
Blood Samples ◽  
Ann Models ◽  
Artificial Neural ◽  
The Impact ◽  
Age Prediction

AbstractRegression models are often used to predict age of an individual based on methylation patterns. Artificial neural network (ANN) however was recently shown to be more accurate for age prediction. Additionally, the impact of ethnicity and sex on our previous regression model have not been studied. Furthermore, there is currently no age prediction study investigating the lower limit of input DNA at the bisulfite treatment stage prior to pyrosequencing. Herein, we evaluated both regression and ANN models, and the impact of ethnicity and sex on age prediction for 333 local blood samples using three loci on the pyrosequencing platform. Subsequently, we trained a one locus-based ANN model to reduce the amount of DNA used. We demonstrated that the ANN model has a higher accuracy of age prediction than the regression model. Additionally, we showed that ethnicity did not affect age prediction among local Chinese, Malays and Indians. Although the predicted age of males were marginally overestimated, sex did not impact the accuracy of age prediction. Lastly, we present a one locus, dual CpG model using 25 ng of input DNA that is sufficient for forensic age prediction. In conclusion, the two ANN models validated would be useful for age prediction to provide forensic intelligence leads.

scholarly journals Estimation of the Hot Swap Circulation Current of a Multiple Parallel Lithium Battery System with an Artificial Neural Network Model

Electronics ◽  
2021 ◽  
Vol 10 (12) ◽  
pp. 1448
Author(s):  
Nam-Gyu Lim ◽  
Jae-Yeol Kim ◽  
Seongjun Lee
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Lithium Battery ◽  
Battery Pack ◽  
Battery Management ◽  
Ann Model ◽  
Battery System ◽  
Load Current ◽  
Circulating Current ◽  
Artificial Neural

Battery applications, such as electric vehicles, electric propulsion ships, and energy storage systems, are developing rapidly, and battery management issues are gaining attention. In this application field, a battery system with a high capacity and high power in which numerous battery cells are connected in series and parallel is used. Therefore, research on a battery management system (BMS) to which various algorithms are applied for efficient use and safe operation of batteries is being conducted. In general, maintenance/replacement of multi-series/multiple parallel battery systems is only possible when there is no load current, or the entire system is shut down. However, if the circulating current generated by the voltage difference between the newly added battery and the existing battery pack is less than the allowable current of the system, the new battery can be connected while the system is running, which is called hot swapping. The circulating current generated during the hot-swap operation is determined by the battery’s state of charge (SOC), the parallel configuration of the battery system, temperature, aging, operating point, and differences in the load current. Therefore, since there is a limit to formulating a circulating current that changes in size according to these various conditions, this paper presents a circulating current estimation method, using an artificial neural network (ANN). The ANN model for estimating the hot-swap circulating current is designed for a 1S4P lithium battery pack system, consisting of one series and four parallel cells. The circulating current of the ANN model proposed in this paper is experimentally verified to be able to estimate the actual value within a 6% error range.

Modeling of lime production process using artificial neural network

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Abolghasem Daeichian ◽  
Rana Shahramfar ◽  
Elham Heidari
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Production Process ◽  
High Energy ◽  
Ann Model ◽  
Artificial Neural ◽  
Rotary Kilns ◽  
Input Variables ◽  
Artificial Neural Network Ann ◽  
Lime Production

Abstract Lime is a significant material in many industrial processes, including steelmaking by blast furnace. Lime production through rotary kilns is a standard method in industries, yet it has depreciation, high energy consumption, and environmental pollution. A model of the lime production process can help to not only increase our knowledge and awareness but also can help reduce its disadvantages. This paper presents a black-box model by Artificial Neural Network (ANN) for the lime production process considering pre-heater, rotary kiln, and cooler parameters. To this end, actual data are collected from Zobahan Isfahan Steel Company, Iran, which consists of 746 data obtained in a duration of one year. The proposed model considers 23 input variables, predicting the amount of produced lime as an output variable. The ANN parameters such as number of hidden layers, number of neurons in each layer, activation functions, and training algorithm are optimized. Then, the sensitivity of the optimum model to the input variables is investigated. Top-three input variables are selected on the basis of one-group sensitivity analysis and their interactions are studied. Finally, an ANN model is developed considering the top-three most effective input variables. The mean square error of the proposed models with 23 and 3 inputs are equal to 0.000693 and 0.004061, respectively, which shows a high prediction capability of the two proposed models.

Sign in / Sign up

Export Citation Format

Share Document