Finite element analysis of high-pressure hose for radial horizontal wells in coalbed methane extraction

2013 ◽  
Vol 19 (2) ◽  
pp. 182-186 ◽  
Author(s):  
Wei-Dong Zhou ◽  
Wei Shi ◽  
Luo-Peng Li ◽  
Jing-Shuang Wang ◽  
Jun Sun
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
High Pressure ◽  
Coalbed Methane ◽  
Horizontal Wells ◽  
Element Analysis ◽  
Methane Extraction

CAD/CAE on the Mould Plates of Vertical Type High-Pressure Grouting Machine

2012 ◽  
Vol 538-541 ◽  
pp. 2681-2684
Author(s):  
Zhi Cheng Huang
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
High Pressure ◽  
3D Model ◽  
Stress And Strain ◽  
Analysis Software ◽  
Element Analysis ◽  
Pressure Grouting ◽  
Object Of Study

Took a type of ceramics for daily use vertical type high pressure grouting machine as the object of study, study the stress and strain of its upper and lower mould plates. Established their 3D model by CAD software Pro-E, and then import them into finite element analysis software to analysis the value and distribution of the stress and strain. The analysis results can provide some reference for design, and have some engineering and practical value.

Investigation on stress distribution and pressure capacity of two-layer split high-pressure die based on finite element analysis

2019 ◽  
Vol 233 (14) ◽  
pp. 5048-5055
Author(s):  
Z Yi ◽  
WZ Fu ◽  
MZ Li
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
High Pressure ◽  
Stress State ◽  
Von Mises Stress ◽  
Stress Distributions ◽  
Element Analysis ◽  
Round Cylinder ◽  
Von Mises ◽  
Supporting Ring

In order to obtain a higher pressure capacity for the high-pressure die with a larger sample cavity, two types of two-layer split dies with a round cylinder and a quadrate cylinder were designed based on the conventional belt-type die. Finite element analysis was performed to investigate the stress distributions and pressure capacities of the high-pressure dies using a derived Mohr–Coulomb criterion and the von Mises criterion for the cylinder and supporting rings, respectively. As predicted by the finite element analysis results, in the two-layer split dies with a round cylinder, the stress state of the cylinder can be only slightly improved; and the von Mises stress of the first layer supporting ring can be hardly decreased. However, in the two-layer split dies with a quadrate cylinder and sample cavity, the stress state of the cylinder can be remarkably improved. Simultaneously, the von Mises stress of the supporting rings, especially for the first-layer supporting ring, can be also effectively decreased. The pressure capacities of the two-layer split dies with a round cylinder and a quadrate cylinder are 16.5% and 63.9% higher with respect to the conventional belt-type die.

Comprehending Occurrence of Premature Failure in Compressor Turbine (CT) Blades for Short-Haul Aircraft Fleet

2019 ◽  
Vol 42 ◽  
pp. 10-23
Author(s):  
Joshua Kimtai Ngoret ◽  
Venkata Parasuram Kommula
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
High Pressure ◽  
Thermal Stresses ◽  
Geometrical Model ◽  
Mechanical Stresses ◽  
Element Analysis ◽  
Premature Failure ◽  
Structural Stresses ◽  
Transient Thermal

This paper presents results from modeling of Compressor Turbine (CT) blades for short-haul aircraft fleet occasioned by thermo-mechanical stresses in order to comprehend the occurrence of premature failure. A 3D PT6A-114A engine high pressure (HP) CT blade geometrical model was developed in commercial CAD-SolidWorks, then imported to ANSYS 15.0 environment for finite element analysis (FEA). The CT blade was investigated for transient thermal stresses from heat generated by the combustors and static structural stresses from rotational velocities of the engine which account for 80% of inertial field during flight. The results revealed that the blades could have served for another 1.44% of the time they were in service.

Dislocation density-based finite element analysis of large strain deformation behavior of copper under high-pressure torsion

2014 ◽  
Vol 76 ◽  
pp. 281-293 ◽  
Author(s):  
Dong Jun Lee ◽  
Eun Yoo Yoon ◽  
Dong-Hyun Ahn ◽  
Byung Ho Park ◽  
Hyo Wook Park ◽  
...  
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
High Pressure ◽  
Dislocation Density ◽  
Deformation Behavior ◽  
High Pressure Torsion ◽  
Large Strain ◽  
Element Analysis

FINITE ELEMENT ANALYSIS ABOUT STATOR OF OPPOSED BICONINAL CONE SCREW HIGH-PRESSURE SEAWATER HYDRAULIC PUMP

Mechanika ◽  
2011 ◽  
Vol 17 (5) ◽  
Author(s):  
Xinhua Wang ◽  
Xiuxia Cao ◽  
Gang Zheng ◽  
Shuwen Sun ◽  
Zhijie Li
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
High Pressure ◽  
Hydraulic Pump ◽  
Element Analysis

Structural Finite Element Analysis and Optimization of Underwater High Pressure Valve

2012 ◽  
Vol 190-191 ◽  
pp. 832-835
Author(s):  
Xian Zhong Yi ◽  
Sheng Zong Jiang ◽  
Jun Feng Zhang ◽  
Ding Feng ◽  
De Li Gao
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
High Pressure ◽  
Element Analysis ◽  
Valve Body ◽  
The Finite Element Analysis ◽  
Seamless Connection ◽  
Stress Concentration Effect ◽  
Multiple Load ◽  
Flap Valve

Abstract. The ship side flap valve underwater works with high pressure. In this paper, the valve body is analyzed using seamless connection between the finite element analysis software and Pro/E software. In the analysis, multiple load cases applied to the valve body are as follows: open condition, closed condition and seal test. The analysis result shows the maximum stress value occurs when the flap valve is open. Moreover, stress value is approximately 65 percent the range of the minimum yield strength, but the strength requirement of the valve body is satisfied. Finally, this paper presents a method for weakening the stress concentration effect by increasing the internal transitional fillet radius between the two hollow and intersectant cylinders of the valve body.

Finite Element Analysis of High-Pressure Common-Rail Injector Body

2011 ◽  
Vol 199-200 ◽  
pp. 579-582 ◽  
Author(s):  
Ju Yan Liu ◽  
Zhi Xia He ◽  
Qian Wang ◽  
Yun Long Huang
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
High Pressure ◽  
Optimization Design ◽  
Material Selection ◽  
Common Rail ◽  
Injection System ◽  
Element Analysis ◽  
Common Rail Injector ◽  
High Pressure Common Rail

The high pressure common rail injection System is one of the most advanced technologies for the diesel engine to reduce fuel consumption exhaust emissions. While the design of the high pressure common rail injector is the key for the whole system. Considering that the working pressure of fuel in the injector, a more accurate injector body model was established with the modeling software Pro/Engineer in this study. Finite element analysis technology in Ansys software was applied to calculate the strength of injector body of the high pressure common rail system under different injection pressures. And then the rationality of structure parameters and material selection of the injector body can be analyzed and verified. The research conclusions can provide the theoretical basis for the optimization design of the injector.

Sign in / Sign up

Export Citation Format

Share Document