scholarly journals Selectivity index and separation efficiency prediction in industrial magnetic separation process using a hybrid neural genetic algorithm

2021 ◽  
Vol 3 (3) ◽  
Author(s):  
Usef Paledi ◽  
Ebrahim Allahkarami ◽  
Bahram Rezai ◽  
Mohammad Reza Aslani
Keyword(s):  
Neural Network ◽  
Genetic Algorithm ◽  
Magnetic Separation ◽  
Separation Efficiency ◽  
Separation Process ◽  
Selectivity Index ◽  
Process Efficiency ◽  
Coefficient Of Determination ◽  
Mean Square ◽  
Ann Model

AbstractIt is essential to know the process efficiency in the industrial magnetic separation process under different operating conditions because it is required to control the process parameters to optimize the process efficiency. To our knowledge, there is no information about using artificial intelligence for modeling the magnetic separation process. Hence, finding a robust and more accurate estimation method for predicting the separation efficiency and selectivity index is still necessary. In this regard, a feed-forward neural network was developed to predict the separation efficiency and selectivity index. This model was trained to present a predictive model based on the percentage of iron, iron oxide and sulfur in mill feed and cobber feed, 80% passing size in mill feed and cobber feed and plant capacity. Therefore, this work aims to develop an intelligent technique based on an artificial neural network and a hybrid neural-genetic algorithm for modeling the concentration process. Results indicated that the values of mean square error and coefficient of determination for the testing phase were obtained 0.635 and 0.86 for selectivity index and of 4.646 and 0.84 for separation efficiency, respectively. In order to improve the performance of neural network, genetic algorithm was used to optimize the weights and biases of neural network. The results of modeling with GA-ANN technique indicated that the mean square error and coefficient of determination for the testing phase were achieved by 0.276 and 0.95 for selectivity index and of 1.782 and 0.92 for separation efficiency, respectively. The other statistical criteria for the GA-ANN model were better than those of the ANN model.

scholarly journals ARTIFICIAL NEURAL NETWORK APPLIED IN FORECASTING THE COMPOSITION OF MUNICIPAL SOLID WASTE IN IASI, ROMANIA

2021 ◽  
Vol 29 (3) ◽  
pp. 368-380
Author(s):  
Cristina Ghinea ◽  
Petronela Cozma ◽  
Maria Gavrilescu
Keyword(s):  
Neural Network ◽  
Time Series ◽  
Artificial Neural Network ◽  
Root Mean Square Error ◽  
Municipal Solid Waste ◽  
Solid Waste ◽  
Mean Square Error ◽  
Coefficient Of Determination ◽  
Mean Square ◽  
Ann Model

Neural network time series (NNTS) tool was used to predict municipal solid waste composition in Iasi, Romania. The nonlinear input output (NIO) time series model and nonlinear autoregressive model with external (exogenous) input (NARX) included in this tool were selected. The coefficient of determination (R2) and root mean square error (RMSE) were chosen for evaluation. By applying NIO, the optimum model is 4-11-6 artificial neural network (ANN, R2 = 0.929) in the case of testing as for the validation, with all 0.849 and 0.885, respectively. Applying NARX, the suitable model became 4-13-6 ANN model, with R2 = 0.999 for training, 0.879 for testing, and 0.931, respectively 0.944 for validation and all. The resulted RMSE is zero for training and 0.0109 for validation in the case of this model which had 4 inputs, 13 neurons and 6 outputs. The four input variables were: number of residents, population aged 15–59 years, urban life expectancy, total municipal solid waste (ton/year). The suitable ANN model revealed the lowest root mean square error and the highest coefficient of determination. Results indicate that NNTS tool is a complex instrument, NARX is more accurate than NIO model, and can be used and applied easily.

Modelling response of infiltration loss toward water table depth using RBFN, RNN, ANFIS techniques

2021 ◽  
Vol 25 (2) ◽  
pp. 227-234
Author(s):  
Sandeep Samantaray ◽  
Abinash Sahoo
Keyword(s):  
Neural Network ◽  
Mean Square Error ◽  
Water Table ◽  
Environmental Sustainability ◽  
Model Development ◽  
Water Table Depth ◽  
Water Levels ◽  
Coefficient Of Determination ◽  
Mean Square ◽  
Inference System

Accurate prediction of water table depth over long-term in arid agricultural areas are very much important for maintaining environmental sustainability. Because of intricate and diverse hydrogeological features, boundary conditions, and human activities researchers face enormous difficulties for predicting water table depth. A virtual study on forecast of water table depth using various neural networks is employed in this paper. Hybrid neural network approach like Adaptive Neuro Fuzzy Inference System (ANFIS), Recurrent Neural Network (RNN), Radial Basis Function Neural Network (RBFN) is employed here to appraisal water levels as a function of average temperature, precipitation, humidity, evapotranspiration and infiltration loss data. Coefficient of determination (R2), Root mean square error (RMSE), and Mean square error (MSE) are used to evaluate performance of model development. While ANFIS algorithm is used, Gbell function gives best value of performance for model development. Whole outcomes establish that, ANFIS accomplishes finest as related to RNN and RBFN for predicting water table depth in watershed.

scholarly journals Optimization of vane demister based on neural network and genetic algorithm

2019 ◽  
Vol 11 (3) ◽  
pp. 168781401983510 ◽  
Author(s):  
San He ◽  
Hang Liu ◽  
Yongli Zou ◽  
Qinqin Zhang
Keyword(s):  
Neural Network ◽  
Genetic Algorithm ◽  
Pressure Drop ◽  
Chemical Engineering ◽  
Separation Efficiency ◽  
Orthogonal Experiment ◽  
Structural Parameters ◽  
Experiment Design ◽  
Orthogonal Experiment Design ◽  
Operation Parameters

A vane demister is widely used for separating tiny droplets from gas streams in the petroleum industry, chemical engineering, and other industries. To obtain optimal structure and operation parameters, a method based on orthogonal experiment design is often adopted. However, in most cases, results from an orthogonal experiment design are suboptimal solutions when there are fewer experiments to optimize the vane demister performance. In this study, to obtain the maximum separation efficiency and minimum pressure drop, Fluent software was used to simulate the two-phase flow of gas and liquid in vane demister with different structural parameters and operation parameters, generating 473 solutions as the sample database. Based on this database, a back propagation neural network was used to establish the prediction model for the separation efficiency and pressure drop, and a genetic algorithm was used for multi-target optimization of this model. The optimization results were compared to Fluent simulation results and the orthogonal experiment design results. The results show that a genetic algorithm generates better results. The optimal separation efficiency of both methods is 100%. However, the optimal pressure drop of the genetic algorithm is 25.77% lower than that of the orthogonal experiment design.

Modeling of Phenol Degradation in Spouted Bed Contactor Using Artificial Neural Network (ANN)

2008 ◽  
Vol 3 (2) ◽  
Author(s):  
Madhukar A. Dabhade ◽  
M. B. Saidutta ◽  
D. V. R. Murthy
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Mean Square Error ◽  
Model Prediction ◽  
Phenol Degradation ◽  
Mean Square ◽  
Ann Model ◽  
Spouted Bed ◽  
The Mean ◽  
Artificial Neural Network Ann

Presence of phenol and phenolic compounds in various wastewaters and its harmful effects has led to the use of different treatment methods. Work on biological methods shows the use of different microorganisms and different bioreactors so as to improve the removal efficiency economically. The present work deals with the use of N. hydrocarbonoxydans (NCIM 2386), an actinomycetes, for the degradation of phenol. N. hydrocarbonoxydans was immobilized on GAC and used in a spouted bed contactor for effective contact of microorganisms and the substrate. The contactor performance was studied by varying flow rates, influent concentrations and the solids loading in the contactor. The effect of these variables on phenol degradation was investigated and modeling study was carried out using the artificial neural network (ANN). A feed forward neural network with back propagation was used for the model development. The experiments were planned as per the face centered cube design (FCCD) and used for training of the model, whereas data from four other experimental runs were used for testing and validation of the model. The network was optimized for the number of neurons based on the mean square error. The ANN model with three layers with three input neurons, eight neurons in hidden layers and one output neuron was found to predict effectively the effluent concentration for the given operating conditions in the spouted bed contactor. The mean square error was found to be 9.318e-12 for this ANN model. Also the experimental data was used to develop second order nonlinear empirical model obtained using multiple regression (MR) and the results compared with ANN using correlation coefficient (R2), average absolute error (AAE) and root mean square error (RMSE). Results show that R2, AAE and RMSE values of MR model were 0.9363, 2.085 % and 2.338 % respectively, while in case of ANN model these values were 0.9995, 0.59 % and 1.263 % respectively. This shows that ANN model prediction is better than multiple regression model prediction.

scholarly journals Rock Fragmentation Prediction through a New Hybrid Model Based on Imperial Competitive Algorithm and Neural Network

2018 ◽  
Vol 2 (3) ◽  
Author(s):  
Danial Jahed Armaghani
Keyword(s):  
Neural Network ◽  
Hybrid Model ◽  
Rock Fragmentation ◽  
Coefficient Of Determination ◽  
Ann Model ◽  
Competitive Algorithm ◽  
Model Coefficient ◽  
Parametric Studies ◽  
Artificial Neural Network Ann ◽  
Fragmentation Prediction

Reliable estimation of rock fragmentation is an important issue in the blasting operations in order to predict quality of the production. Since rock fragmentation is affected by various parameters such as blast pattern and rock mass characteristics, it is very difficult to have an appreciate prediction of it. This paper describes a new hybrid imperialism competitive algorithm (ICA)-artificial neural network (ANN) in order to solve shortcomings of ANN itself for prediction of rock fragmentation. In fact, the influence of ICA on ANN results was studied in this research. By investigating the related studies, the most important parameters of ICA were identified and a series of parametric studies for their determination were conducted. All models were built using 8 inputs and one output which is rock fragmentation. To have a fair comparison and show the capability of the new hybrid model, a pre-developed ANN model was also considered and constructed. Evaluation of the obtained results demonstrated that a higher ability of rock fragmentation prediction is received developing a hybrid ICA-ANN model. Coefficient of determination (R2) values of (0.949 and 0.813) and (0.941 and 0.819) were obtained for training and testing of ICA-ANN and ANN models, respectively which indicated that the proposed ICA-ANN model can be implemented better in improving performance capacity of ANN model in estimating rock fragmentation.

scholarly journals Artificial neural network model in predicting the quality of fresh tomato genotypes

2021 ◽  
Vol 48 (1) ◽  
pp. 9-21
Author(s):  
Mladenka Pestorić ◽  
Jasna Mastilović ◽  
Žarko Kevrešan ◽  
Lato Pezo ◽  
Miona Belović ◽  
...  
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Sensory Properties ◽  
Coefficient Of Determination ◽  
Eating Quality ◽  
Ann Model ◽  
Artificial Neural ◽  
Fresh Tomato

Sensory analysis is the best mean to precisely describe the eating quality of fresh foods. However, it is expensive and time-consuming method which cannot be used for measuring quality properties in real time. The aim of this paper was to contribute to the study of the relationship between sensory and instrumental data, and to define a proper model for predicting sensory properties of fresh tomato through the determination of the physicochemical properties. Principal Component Analysis (PCA) was applied to the experimental data to characterize and differentiate among the observed genotypes, explaining 73.52% of the total variance, using the first three principal components. Artificial neural network (ANN) model was used for the prediction of sensory properties based on the results obtained by basic chemical and instrumental determinations. The developed ANN model predicts the sensory properties with high adequacy, with the overall coefficient of determination of 0.859.

scholarly journals Comparing Four Types Methods for Karst NDVI Prediction Based on Machine Learning

Atmosphere ◽  
2021 ◽  
Vol 12 (10) ◽  
pp. 1341
Author(s):  
Yuju Ma ◽  
Liyuan Zuo ◽  
Jiangbo Gao ◽  
Qiang Liu ◽  
Lulu Liu
Keyword(s):  
Neural Network ◽  
Mean Square Error ◽  
Human Activities ◽  
Vegetation Index ◽  
Terrestrial Ecosystem ◽  
Coefficient Of Determination ◽  
Percentage Error ◽  
Support Vector ◽  
Mean Square ◽  
Response Factors

As a link for energy transfer between the land and atmosphere in the terrestrial ecosystem, karst vegetation plays an important role. Karst vegetation is not only affected by environmental factors but also by intense human activities. The nonlinear characteristics of vegetation growth are induced by the interaction mechanism of these factors. Previous studies of this relationship were not comprehensive, and it is necessary to further explore it using a suitable method. In this study, we selected climate, human activities, topography, and soil texture as the response factors; a nonlinear relationship model between the karst normalized difference vegetation index (NDVI) and these factors was established by applying a back propagation neural network (BPNN), a radial basis function neural network (RBFNN), the random forest (RF) algorithm, and support vector regression (SVR); and then, the karst NDVI was predicted. The coefficient of determination (R2), mean square error (MSE), root mean square error (RMSE), and mean absolute percentage error (MAPE) of the obtained results were calculated, and the mean R2 values of the BPNN, RBFNN, RF, and SVR models were determined to be 0.77, 0.86, 0.89, and 0.91, respectively. Compared with the BPNN, RBFNN, and RF models, the SVR model had the lowest errors, with mean MSE, RMSE, and MAPE values of 0.001, 0.02, and 2.77, respectively. The results show that the BPNN, RBFNN, RF, and SVR models are within acceptable ranges for karst NDVI prediction, but the overall performance of the SVR model is the best, and it is more suitable for karst vegetation prediction.

scholarly journals Investigation of the effect of several parameters on the applicability of magnetic separation method

2021 ◽  
pp. 69-73
Author(s):  
Tariq Al-Azab ◽  
Jamil Haddad ◽  
Fadi Alfaqs
Keyword(s):  
Magnetic Separation ◽  
Centrifugal Force ◽  
Magnetic Force ◽  
Separation Efficiency ◽  
Industrial Applications ◽  
Separation Process ◽  
Silica Sand ◽  
Sand Particle ◽  
Roll Speed ◽  
Magnetic Separator

Purpose. This research investigates the separation process performed by a magnetic separator. The magnetic separation process is used to isolate ferrous materials from those which are not. Hence, a prototype of a dry magnetic separator is designed. It should be said that this study defines the effect of different parameters (roll speed, magnetic force, and mass of silica sand particle) on separation efficiency. Methodology. The influence of several parameters of the magnetic separator such as magnetic force, centrifugal force, and properties of particle (mass, shape, etc.) were studied theoretically and simulated by SolidWorks software. The optimum conditions of the magnetic separator were obtained, and several trials were performed to find the point that results in a lower effect of roller speed and a higher effect of the magnetic force on the particle in order to achieve higher separating efficiency. Findings. The results show that the centrifugal force are the most important variable influencing separating efficiency. Moreover, it was found that blade angle magnitude of (174) degree with magnetic force between (1.71E-05 to 6.3E-05 N) and roll speed from (84 to 105 rpm) are the optimum separating conditions to reach higher rate of the separating process. Originality. This is the first time that the effect of the gap distance between the magnet and the feeding particles on the magnetic force has been studied. Furthermore, the effect of centrifugal force on magnetic separator force is investigated theoretically and numerically in order to be compared for different parameters. Practical value. The new prototype design of the magnetic separating unit is promising and efficient since the parameters can be varied based on the type and characteristics of materials. It is also revealed that separating time of the materials is reduced. Hence, this type of construction of a magnetic separator is recommended for industrial applications.

scholarly journals The Use of an Artificial Neural Network for Predicting the Gloss of Thermally Densified Wood Veneers

2021 ◽  
Vol 27 (2) ◽  
Author(s):  
Şükrü Özşahin ◽  
Hilal Singer
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Model Performance ◽  
Coefficient Of Determination ◽  
Densified Wood ◽  
Percentage Error ◽  
Angle Of Incidence ◽  
Ann Model ◽  
Artificial Neural ◽  
Artificial Neural Network Ann

In this study, an artificial neural network (ANN) model was developed to predict the gloss of thermally densified wood veneers. A custom application created with MATLAB codes was employed for the development of the multilayer feed-forward ANN model. The wood species, temperature, pressure, measurement direction, and angle of incidence were considered as the model inputs, while the gloss was the output of the ANN model. Model performance was evaluated by using the mean absolute percentage error (MAPE), the root mean square error (RMSE), and the coefficient of determination (R²). It was observed that the ANN model yielded very satisfactory results with acceptable deviations. The MAPE, RMSE, and R2 values of the testing period of the ANN model were found as 8.556%, 1.245, and 0.9814, respectively. Consequently, this study could be useful for the wood industry to predict the gloss with less number of tiring experimental activities.

scholarly journals Smart System for Prediction of Accurate Surface Electromyography Signals Using an Artificial Neural Network

2019 ◽  
Vol 11 (1) ◽  
pp. 25 ◽  
Author(s):  
Osama Dorgham ◽  
Ibrahim Al-Mherat ◽  
Jawdat Al-Shaer ◽  
Sulieman Bani-Ahmad ◽  
Stephen Laycock
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Electrical Potential ◽  
Eccentric Contraction ◽  
Surface Emg ◽  
Mean Square ◽  
Ann Model ◽  
Semg Signal ◽  
Artificial Neural ◽  
Semg Signals

Bioelectric signals are used to measure electrical potential, but there are different types of signals. The electromyography (EMG) is a type of bioelectric signal used to monitor and recode the electrical activity of the muscles. The current work aims to model and reproduce surface EMG (SEMG) signals using an artificial neural network. Such research can aid studies into life enhancement for those suffering from damage or disease affecting their nervous system. The SEMG signal is collected from the surface above the bicep muscle through dynamic (concentric and eccentric) contraction with various loads. In this paper, we use time domain features to analyze the relationship between the amplitude of SEMG signals and the load. We extract some features (e.g., mean absolute value, root mean square, variance and standard deviation) from the collected SEMG signals to estimate the bicep’ muscle force for the various loads. Further, we use the R-squared value to depict the correlation between the SEMG amplitude and the muscle loads by linear fitting. The best performance the ANN model with 60 hidden neurons for three loads used (3 kg, 5 kg and 7 kg) has given a mean square error of 1.145, 1.3659 and 1.4238, respectively. The R-squared observed are 0.9993, 0.99999 and 0.99999 for predicting (reproduction step) of smooth SEMG signals.

Sign in / Sign up

Export Citation Format

Share Document