scholarly journals Paralleling insulated-gate bipolar transistors in the H-bridge structure to reduce current stress

2021 ◽  
Vol 3 (4) ◽  
Author(s):  
Majid Memarian Sorkhabi ◽  
Karen Wendt ◽  
Daniel Rogers ◽  
Timothy Denison

AbstractIn this study we present the new power electronic circuit implementation to create the arbitrary near-rectangular electromagnetic pulse. To this end, we develop a parallel- Insulated-gate bipolar transistors (IGBT)-based magnetic pulse generator utilizing the H-bridge architecture. This approach effectively reduces the current stress on the power switches while maintaining a simple structure using a single DC source and energy storage capacitor. Experimental results from the circuit characterization show that the proposed circuit is capable of repeatedly generating near-rectangular magnetic pulses and enables the generation of configurable and stable magnetic pulses without causing excessive device stresses. The introduced device enables the production of near-rectangular pulse trains for modulated magnetic stimuli. The maximum positive pulse width in the proposed neurostimulator is up to 600 µs, which is adjustable by the operator at the step resolution of 10 µs. The maximum transferred energy to the treatment coil was measured to be 100.4 J. The proposed transcranial magnetic stimulator (TMS) device enables more flexible magnetic stimulus shaping by H-bridge architecture and parallel IGBTs, which can effectively mitigate the current stress on power switches for repetitive treatment protocols.

Sensors ◽  
2019 ◽  
Vol 19 (19) ◽  
pp. 4176 ◽  
Author(s):  
Chaoqun Jiao ◽  
Juan Zhang ◽  
Zhibin Zhao ◽  
Zuoming Zhang ◽  
Yuanliang Fan

With the development of China’s electric power, power electronics devices such as insulated-gate bipolar transistors (IGBTs) have been widely used in the field of high voltages and large currents. However, the currents in these power electronic devices are transient. For example, the uneven currents and internal chip currents overshoot, which may occur when turning on and off, and could have a great impact on the device. In order to study the reliability of these power electronics devices, this paper proposes a miniature printed circuit board (PCB) Rogowski coil that measures the current of these power electronics devices without changing their internal structures, which provides a reference for the subsequent reliability of their designs.


Energies ◽  
2021 ◽  
Vol 14 (15) ◽  
pp. 4545
Author(s):  
Yongseung Oh ◽  
Jaeeul Yeon ◽  
Jayoon Kang ◽  
Ilya Galkin ◽  
Wonsoek Oh ◽  
...  

Single-ended (SE) resonant inverters are widely used as power converters for high-pressure rice cooker induction, with 1200 V insulated-gate bipolar transistors (IGBTs) being used as switching devices for kW-class products. When voltage fluctuations occur at the input stage of an SE resonant inverter, the resonant voltage applied to the IGBT can be directly affected, potentially exceeding the breakdown voltage of the IGBT, resulting in its failure. Consequently, the resonant voltage should be limited to below a safety threshold—hardware resonant voltage limiting methods are generally used to do so. This paper proposes a sensorless resonant voltage control method that limits the increase in the resonant voltage caused by overvoltage or supply voltage fluctuations. By calculating and predicting the resonance voltage through the analysis of the resonance circuit, the resonance voltage is controlled not to exceed the breakdown voltage of the IGBT. The experimental results of a 1.35 kW SE resonant inverter for a high-pressure induction heating rice cooker were used to verify the validity of the proposed sensorless resonant voltage limiting method.


2001 ◽  
Author(s):  
Giho Cha ◽  
Youngchul Kim ◽  
Hyungwoo Jang ◽  
Hyunsoon Kang ◽  
Changsub Song

Sign in / Sign up

Export Citation Format

Share Document