Optimum Selection of Soil-Reinforced Herbaceous Plants Considering Plant Growth and Distribution Characteristics

Author(s):  
Guoliang Hao ◽  
Xiangfeng Liu ◽  
Qiang Zhang ◽  
Li Xiang ◽  
Bing Yu
Materials ◽  
2018 ◽  
Vol 12 (1) ◽  
pp. 112 ◽  
Author(s):  
Alex Iglesias ◽  
Zoltan Dombovari ◽  
German Gonzalez ◽  
Jokin Munoa ◽  
Gabor Stepan

Cutting capacity can be seriously limited in heavy duty face milling processes due to self-excited structural vibrations. Special geometry tools and, specifically, variable pitch milling tools have been extensively used in aeronautic applications with the purpose of removing these detrimental chatter vibrations, where high frequency chatter related to slender tools or thin walls limits productivity. However, the application of this technique in heavy duty face milling operations has not been thoroughly explored. In this paper, a method for the definition of the optimum angles between inserts is presented, based on the optimum pitch angle and the stabilizability diagrams. These diagrams are obtained through the brute force (BF) iterative method, which basically consists of an iterative maximization of the stability by using the semidiscretization method. From the observed results, hints for the selection of the optimum pitch pattern and the optimum values of the angles between inserts are presented. A practical application is implemented and the cutting performance when using an optimized variable pitch tool is assessed. It is concluded that with an optimum selection of the pitch, the material removal rate can be improved up to three times. Finally, the existence of two more different stability lobe families related to the saddle-node and flip type stability losses is demonstrated.


2021 ◽  
Author(s):  
K Harshavardhana Reddy ◽  
Sachin Sharma ◽  
B. Madhuri ◽  
K Shivarama Krishna

2021 ◽  
pp. 2813-2823
Author(s):  
Firas A. Hadi ◽  
Zaid F. Makki ◽  
Rafa A. Al-Baldawi

The main objective of this paper is present a novel method to choice a certain wind turbine for a specific site by using normalized power and capacity factor curves. The site matching is based on identifying the optimum turbine rotation speed parameters from turbine performance index (TPI) curve, which is obtained from the higher values of normalized power and capacity factor curves. Wind Turbine Performance Index a new ranking parameter, is defined to optimally match turbines to wind site. The relations (plots) of normalized power, capacity factor, and turbine performance index versus normalized rated wind speed are drawn for a known value of Weibull shape parameter of a site, thus a superior method is used for Weibull parameters estimation which is called Equivalent Energy Method (EEM).


Pathogens ◽  
2021 ◽  
Vol 10 (10) ◽  
pp. 1242
Author(s):  
Martina Sinno ◽  
Marta Ranesi ◽  
Ilaria Di Lelio ◽  
Giuseppina Iacomino ◽  
Andrea Becchimanzi ◽  
...  

Endophytic fungi (EF) can enhance both plant growth and defense barriers against pests and pathogens, contributing to the reduction of chemical pesticides and fertilizers use in agriculture. Beauveria bassiana is an entomopathogenic fungus showing endophytism in several crops, often associated with a good capacity to limit the development of pests and disease agents. However, the diversity of the protective efficacy and plant response to different strains can be remarkable and needs to be carefully assessed for the successful and predictable use of these beneficial microorganisms. This study aims to select B. bassiana strains able to colonize tomato plants as endophytes as well as to control two important disease agents, Botrytis cinerea and Alternaria alternata, and the pest aphid, Macrosiphum euphorbiae. Nine wild-type isolates and one commercial strain were screened for endophytism, then further characterized for plant-growth promotion plus inhibition of disease development and pest infestation. Four isolates proved to have a good control activity against the biotic stressors tested, but only Bb716 was also able to promote plant growth. This work provides a simple workflow for the selection of beneficial EF, paving the way towards more effective use of B. bassiana in Integrate Pest Management (IPM) of tomato.


2021 ◽  
Vol 30 (1) ◽  
pp. 78-89
Author(s):  
Nataliya O. Kryuchenko ◽  
Edward Ya. Zhovinsky ◽  
Petr S. Paparyga

he objective of the paper was determining biogeochemical peculiarities of ac- cumulation of chemical elements (Mn, Ni, Сo, V, Cr, Zr, Cu, Pb, Zn, Ba, P) by wild-grow- ing shrubs (stems and leaves) – bog bilberry (Vaccіnium uliginоsum), European blueberry (Vaccinium myrtillus L.), alpine juniper (J. communis subsp. alpina); perennial herbaceous plants (flowers and leaves) – common tormentil (Potentіlla erecta (L.) Hampe), willow gentian (Gentiana asclepiadea), true sedges (Carex); and trees (needles) of European silver fir (Abies alba) on nine plots in the Svy- dovets Massif of the Ukrainian Carpathians. The results we obtained based on field surveys (selection of samples of soil and vegeta- tion) and interpretation of their analysis allowed us to determine the total regional background of chemical elements in soils and ash of plants using emission spectral analysis. We assessed the total concentration of chemical elements in soils of the plots (least to highest): the Apshynets Ridge – the Herashaska Polonyna – Drahobratske Lake – the Svydovets stream – Apshynets Lake – Herashaske Lake – the Zhuravlyne Bog – Vorozheske Lake (group of small lakes) – Vorozheske Lake (large) and determined the dependence on type of soil and pH. We determined that for wild-growing herbaceous plants the biogeochemical activity of species increases in the following sequence: true sedges - willow gentian - common tormentil; for wild-growing shrubs (bog bilberry, European blueberry, alpine juniper) such a sequence is impossible to determine due to the great difference between the values on different plots. We determined the role of each plant as medicinal for treating microelement deficiency in Cu, Zn, Co. We determined that in the plot of the Herashaska Polonyna, the needles of alpine juniper contain a maximum amount of Zn and Co, the needles and leaves of bog bilberry – Cu, Zn, Co; the flowers and leaves of common tormentil by Apshynets Lake and European silver fir near the area of the Svydovets stream – Cu. We calculated the daily dose of each element according to species of plants to overcome microelementosis. The results of biogeochemical surveys may be the basis for determining and recommending plants as medicinal, and also of geochemical and biogeochemical monitoring studies.


Sign in / Sign up

Export Citation Format

Share Document