scholarly journals CFD Code Validation against Stratified Air-Water Flow Experimental Data

2008 ◽  
Vol 2008 ◽  
pp. 1-7 ◽  
Author(s):  
F. Terzuoli ◽  
M. C. Galassi ◽  
D. Mazzini ◽  
F. D'Auria
Keyword(s):  
Experimental Data ◽  
Numerical Simulations ◽  
Water Flow ◽  
Nuclear Reactor ◽  
Cold Water ◽  
Three Dimensional ◽  
Free Surface Flow ◽  
Surface Flow ◽  
Two Phase ◽  
Code Validation

Pressurized thermal shock (PTS) modelling has been identified as one of the most important industrial needs related to nuclear reactor safety. A severe PTS scenario limiting the reactor pressure vessel (RPV) lifetime is the cold water emergency core cooling (ECC) injection into the cold leg during a loss of coolant accident (LOCA). Since it represents a big challenge for numerical simulations, this scenario was selected within the European Platform for Nuclear Reactor Simulations (NURESIM) Integrated Project as a reference two-phase problem for computational fluid dynamics (CFDs) code validation. This paper presents a CFD analysis of a stratified air-water flow experimental investigation performed at the Institut de Mécanique des Fluides de Toulouse in 1985, which shares some common physical features with the ECC injection in PWR cold leg. Numerical simulations have been carried out with two commercial codes (Fluent and Ansys CFX), and a research code (NEPTUNE CFD). The aim of this work, carried out at the University of Pisa within the NURESIM IP, is to validate the free surface flow model implemented in the codes against experimental data, and to perform code-to-code benchmarking. Obtained results suggest the relevance of three-dimensional effects and stress the importance of a suitable interface drag modelling.

scholarly journals A Computational Fluid Dynamics Model for a Water Vortex Power Plant as Platform for Etho- and Ecohydraulic Research

Energies ◽  
2021 ◽  
Vol 14 (3) ◽  
pp. 639
Author(s):  
Dennis Powalla ◽  
Stefan Hoerner ◽  
Olivier Cleynen ◽  
Nadine Müller ◽  
Jürgen Stamm ◽  
...  
Keyword(s):  
Power Plant ◽  
Numerical Model ◽  
Large Scale ◽  
Stokes Equations ◽  
Three Dimensional ◽  
Field Measurements ◽  
Free Surface Flow ◽  
Surface Flow ◽  
Navier Stokes ◽  
Two Phase

The objective of the present paper is to develop a validated numerical model of a water vortex power plant that serves as a digital twin for further studies such as assessments of the ethohydraulic characteristics or the performance of such devices. The reference for the validation process is a large-scale hydraulic installation equipped with a full-scale water vortex power plant prototype installed in Dresden (Germany), where flow field measurements were carried out using three-dimensional Acoustic Doppler Velocimetry. The numerical model was implemented within the software package Star-CCM+. The unsteady, two-phase flow was solved with the Reynolds-Averaged Navier–Stokes equations in a Eulerian Multiphase approach, deploying a Volume of Fluid method to describe the free-surface flow. Water level and flow velocities were systematically compared in key areas of the device, demonstrating that the simulation is in good agreement with experimental observations. Relative differences are limited to at most 4% regarding water height in the system, and even the much more challenging velocity fields are reproduced with typical relative errors of roughly 10%. This validates the ability of the model to model the challenging flow conditions found in a water vortex power plant, enabling subsequent studies of the characteristics of this power plant concerning fish migration.

scholarly journals Time-resolved PIV measurements of a deflected submerged jet interacting with liquid-gas and liquid-liquid interfaces

2021 ◽  
Author(s):  
Stefan Puttinger ◽  
Mahdi Saeedipour
Keyword(s):  
Liquid Layer ◽  
Large Scale ◽  
Free Surface Flow ◽  
Industrial Applications ◽  
Liquid Pool ◽  
Surface Flow ◽  
Two Phase ◽  
Time Resolved ◽  
Submerged Jet ◽  
Major Interest

AbstractThis paper presents an experimental investigation on the interactions of a deflected submerged jet into a liquid pool with its above interface in the absence and presence of an additional lighter liquid. Whereas the former is a free surface flow, the latter mimics a situation of two stratified liquids where the liquid-liquid interface is disturbed by large-scale motions in the liquid pool. Such configurations are encountered in various industrial applications and, in most cases, it is of major interest to avoid the entrainment of droplets from the lighter liquid into the main flow. Therefore, it is important to understand the fluid dynamics in such configurations and to analyze the differences between the cases with and without the additional liquid layer. To study this problem, we applied time-resolved particle image velocimetry experiments with high spatial resolution. A detailed data analysis of a small layer beneath the interface shows that although the presence of an additional liquid layer stabilizes the oscillations of the submerged jet significantly, the amount of kinetic energy, enstrophy, and velocity fluctuations concentrated in the proximity of the interface is higher when the oil layer is present. In addition, we analyze the energy distribution across the eigenmodes of a proper orthogonal distribution and the distribution of strain and vortex dominated regions. As the main objective of this study, these high-resolution time-resolved experimental data provide a validation platform for the development of new models in the context of the volume of fluid-based large eddy simulation of turbulent two-phase flows.

Development and Validation of a Three-Dimensional Multiphase Flow CFD Analysis for Journal Bearings in Steam and Heavy Duty Gas Turbines

2012 ◽  
Author(s):  
Stephan Uhkoetter ◽  
Stefan aus der Wiesche ◽  
Michael Kursch ◽  
Christian Beck
Keyword(s):  
Experimental Data ◽  
Multiphase Flow ◽  
Gas Turbines ◽  
High Speed ◽  
Three Dimensional ◽  
Air Entrainment ◽  
Journal Bearings ◽  
Heavy Duty ◽  
Present Contribution ◽  
Two Phase

The traditional method for hydrodynamic journal bearing analysis usually applies the lubrication theory based on the Reynolds equation and suitable empirical modifications to cover turbulence, heat transfer, and cavitation. In cases of complex bearing geometries for steam and heavy-duty gas turbines this approach has its obvious restrictions in regard to detail flow recirculation, mixing, mass balance, and filling level phenomena. These limitations could be circumvented by applying a computational fluid dynamics (CFD) approach resting closer to the fundamental physical laws. The present contribution reports about the state of the art of such a fully three-dimensional multiphase-flow CFD approach including cavitation and air entrainment for high-speed turbo-machinery journal bearings. It has been developed and validated using experimental data. Due to the high ambient shear rates in bearings, the multiphase-flow model for journal bearings requires substantial modifications in comparison to common two-phase flow simulations. Based on experimental data, it is found, that particular cavitation phenomena are essential for the understanding of steam and heavy-duty type gas turbine journal bearings.

scholarly journals A computational investigation of the hydrodynamics of the Badush dam in northern Iraq

2018 ◽  
Vol 240 ◽  
pp. 04009
Author(s):  
Younis Saida Saeedrashed ◽  
Ali Cemal Benim
Keyword(s):  
Three Dimensional ◽  
Free Surface Flow ◽  
Surface Flow ◽  
Dam Failure ◽  
Northern Iraq ◽  
Digital Elevation ◽  
Computational Fluid Dynamics Cfd ◽  
Flow Through ◽  
Elevation Model ◽  
Bottom Outlets

A computational analysis of the hydrodynamics of the Badush dam in Iraq is presented, which is planned to be reconstructed as a repulse dam, to prevent the Mosul city, in case of a failure of the Mosul dam. Computational Fluid Dynamics (CFD) is applied in combination with Geometric Information System (GIS) and Digital Elevation Model (DEM). In the first part of the study, a hydrologic study of a possible Mosul dam failure is performed, predicting the important parameters for a possible flooding of Mosul city. Here, a two-dimensional, depth-averaged shallow water equations are used to formulate the flow. Based on GIS and DEM, the required reservoir size and the water level of the Badush dam are predicted, for its acting as a repulse dam. Subsequently, a computational model of the reconstructed Badush dam is developed, combining the proposed construction with the local geographic topology to achieve a perfect fit. Finally, the water flow through the bottom outlets and stilling basin of the proposed dam is calculated by an unsteady, three-dimensional CFD analysis of the turbulent, free-surface flow. The CFD model is validated by comparing the predictions with measurements obtained on a physical model, where a quite satisfactory agreement is observed.

scholarly journals The Finite Element Numerical Investigation of Free Surface Newtonian and Non-Newtonian Fluid Flows in the Rectangular Tanks

2020 ◽  
Vol 2020 ◽  
pp. 1-18
Author(s):  
Puyang Gao
Keyword(s):  
Finite Element ◽  
Free Surface ◽  
Level Set ◽  
Newtonian Fluid ◽  
Mass Conservation ◽  
Free Surface Flow ◽  
Surface Flow ◽  
Two Phase ◽  
Navier Stokes Equation ◽  
Correction Technique

In this paper, we develop a new computational framework to investigate the sloshing free surface flow of Newtonian and non-Newtonian fluids in the rectangular tanks. We simulate the flow via a two-phase model and employ the fixed unstructured mesh in the computation to avoid the mesh distortion and reconstruction. As for the solution of Navier–Stokes equation, we utilize the SUPG finite element method based on the splitting scheme. The same order interpolation functions are then used for velocity and pressure. Moreover, the moving interface is captured via the concise level set method. We take advantage of the implicit discontinuous Galerkin method to handle the solution of level set and its reinitialization equations. A mass correction technique is also added to ensure the mass conservation property. The dam break-free surface flow is simulated firstly to demonstrate the validity of our mathematical model. In addition, the sloshing Newtonian fluid in the tank with flat and rough bottoms is considered to illustrate the feasibility and robustness of our computational scheme. Finally, the development of free surface for non-Newtonian fluid is also studied in the two tanks, and the influence of power-law index on the sloshing fluid flow is analyzed.

scholarly journals Sheared free-surface flow over three-dimensional obstructions of finite amplitude

2019 ◽  
Vol 878 ◽  
pp. 740-767
Author(s):  
Andreas H. Akselsen ◽  
Simen Å. Ellingsen
Keyword(s):  
Perturbation Technique ◽  
Three Dimensional ◽  
Free Surface Flow ◽  
Radiation Condition ◽  
Finite Amplitude ◽  
Higher Order ◽  
Surface Flow ◽  
Current Profile ◽  
Bottom Boundary Condition ◽  
Lord Kelvin

When shallow water flows over uneven bathymetry, the water surface is modulated. This type of problem has been revisited numerous times since it was first studied by Lord Kelvin in 1886. Our study analytically examines currents whose unperturbed velocity profile $U(z)$ follows a power law $z^{q}$, flowing over a three-dimensional uneven bed. This particular form of $U$, which can model a miscellany of realistic flows, allows explicit analytical solutions. Arbitrary bed shapes can readily be imposed via Fourier’s theorem provided their steepness is moderate. Three-dimensional vorticity–bathymetry interaction effects are evident when the flow makes an oblique angle with a sinusoidally corrugated bed. Streamlines are found to twist and the fluid particle drift is redirected away from the direction of the unperturbed current. Furthermore, a perturbation technique is developed which satisfies the bottom boundary condition to arbitrary order also for large-amplitude obstructions which penetrate well into the current profile. This introduces higher-order harmonics of the bathymetry amplitude. States of resonance for first- and higher-order harmonics are readily calculated. Although the method is theoretically restricted to bathymetries of moderate inclination, a wide variety of steeper obstructions are satisfactorily represented by the method, even provoking occurrences of recirculation. All expressions are analytically explicit and sequential fast Fourier transformations ensure quick and easy computation for arbitrary three-dimensional bathymetries. A method for separating near and far fields ensures computational convergence under the appropriate radiation condition.

Sign in / Sign up

Export Citation Format

Share Document