Auxiliary current control for improving unloading transient recovery of buck converter

2022 ◽  
Author(s):  
Dongwook Kim ◽  
Jong-Won Shin
Keyword(s):  
Current Control ◽  
Buck Converter

scholarly journals A solar fed BLDC motor drive for mixer grinder using a buck converter

2020 ◽  
Vol 10 (2) ◽  
pp. 1113
Author(s):  
Deekshitha S. Nayak ◽  
R. Shivarudraswamy
Keyword(s):  
Load Condition ◽  
Performance Comparison ◽  
Current Control ◽  
Buck Converter ◽  
Small Scale ◽  
Motor Drive ◽  
Bldc Motor ◽  
Brushless Dc ◽  
Photovoltaic Array ◽  
Simulated System

In large and small scale applications, different kinds of variable speed driving systems can be found. For saving the energy consumption of these devices, eco-friendly electronics are used, which lead to the development of the Brushless DC motor (BLDC). Its higher power density, higher efficiency, higher torque at low speed, and low maintenance enhances the use of a BLDC motor. The existing mixer grinder consists of the universal motor, which operates in alternating current supply due to high starting torque characteristics and simple controlling of the speed. The absence of brushes and the reduction of noise in the BLDC extends its life and makes it ideal in a mixer grinder. A solar-powered BLDC motor drive for a mixer grinder is presented in this paper. A DC-DC buck converter is utilized to operate the PV (photovoltaic) array at its maximum power. The proposed hysteresis current control BLDC system has been developed in the MATLAB. The commercially available mixer grinder is presented along with the proposed simulated system for performance comparison. It can be concluded that at the no load condition, the efficiency of the experimental existing mixer grinder is 51.03% and simulated proposed system is 81.25% and at load condition, the efficiency of the experimental mixer grinder is 49.32% and simulated system is 79.85%.

Artificial Neural Network Based on a Predictive Current Control in a DC-DC Buck Converter

2021 ◽  
Author(s):  
Jazmin Ramirez-Hernandez ◽  
Leobardo Hernandez-Gonzalez ◽  
Oswaldo Ulises Juarez-Sandoval ◽  
Jose Pablo Garcia-Fernandez ◽  
Marcos Yair Bote-Vazquez
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Current Control ◽  
Buck Converter ◽  
Artificial Neural

scholarly journals Real Time Energy Management and Control of Renewable Energy based Microgrid in Grid Connected and Island Modes

Energies ◽  
2019 ◽  
Vol 12 (2) ◽  
pp. 276 ◽  
Author(s):  
Muhammed Worku ◽  
Mohamed Hassan ◽  
Mohamed Abido
Keyword(s):  
Energy Storage ◽  
Real Time ◽  
Control Strategy ◽  
Current Control ◽  
Buck Converter ◽  
Management Control ◽  
Diesel Generator ◽  
Control Scheme ◽  
Real Time Digital Simulator ◽  
System Frequency

An efficient power management control for microgrids with energy storage is presented in this paper. The proposed control scheme increases the reliability and resiliency of the microgrid based on three distributed energy resources (DERs), namely Photovoltaic (PV), battery, and diesel generator with local active loads. Coordination among the DERs with energy storage is essential for microgrid management. The system model and the control strategy were developed in Real Time Digital Simulator (RTDS). Decoupled d-q current control strategy is proposed and implemented for voltage source converters (VSCs) used to interface the PV and battery sources to the AC grid. A dc-dc buck converter with a maximum power point tracking function is implemented to maximize the intermittent energy generation from the PV array. A controller is proposed and employed for both grid connected and island modes of operation. In grid connected mode, the system frequency and voltage are regulated by the grid. During a fault in island mode, the diesel generator controls the system frequency and voltage in isochronous mode. Results based on the real time digital simulator are provided to verify the superiority and effectiveness of the proposed control scheme.

Soft-Switching Auxiliary Current Control for Improving Load Transient Response of Buck Converter

2021 ◽  
Vol 36 (3) ◽  
pp. 2488-2494
Author(s):  
Dongwook Kim ◽  
Myeongjae Hong ◽  
Jongun Baek ◽  
Jisu Lee ◽  
Joonho Shin ◽  
...  
Keyword(s):  
Transient Response ◽  
Current Control ◽  
Buck Converter ◽  
Soft Switching

scholarly journals DC-DC Buck Boost Converter For Renewable and Biomedical Application based Real-Time IoT

2019 ◽  
Vol 8 (4) ◽  
pp. 328-336
Keyword(s):  
Pulse Width ◽  
High Efficiency ◽  
Boost Converter ◽  
Heart Beat ◽  
Current Control ◽  
Buck Converter ◽  
Raspberry Pi ◽  
Control Line ◽  
Light Load ◽  
Control Scheme

DC-DC buck boost converter is a conversion circuit using induced frequency inductors, switching.DC-DC converters dynamics was improved by using self calibrated preemptive current control. As, a result Preemptive concurrent control reduces capacitor size by 10x.DC DC buck converter with pulse width modulation.DC-DC buck converter with two step pulse width modulation was utilized for low power application by using delay, control line. Main motive of DC-DC buck converter with pulse width modulations obtains high linearity, high granularity. Conversion efficiency for Light load current was increased in buck converter by clocked hysteresis scheme. Power supplied to comparator was scaled to load easily. Conventional buck converter was integrated with LED to expand smart bulb. Main power from supply was decoupled by Non linear ramp control scheme preventing LED output flickering. Control scheme effectiveness was improved by small signal model. Three major characteristics of Light emitting diodes are improved lifetime, high efficiency, increased reliability, controllability. High brightness LED by multicell three phases was used for its lower cost. Heart beat was identified by using raspberry pi, system on chip with three stages in it namely Heart beat determination, Impedence, cardiography parameters. Accidents was restricted by this method.Overspeeding vehicles was identified was main goal of using complex proportional assessment method. Converting Rice husk into bio fuels was performed by thermo chemical processes. Rice hulk silica was utilized for fluorescent silica particles synthesis.

Sign in / Sign up

Export Citation Format

Share Document