An analytical discrete model for evaluation the chaotic behavior of buck converter under current control mode

2009 ◽  
Author(s):  
Ataollah Abbasi ◽  
Mehrdad Rostami ◽  
Jafar Abdollahi ◽  
Hamid R. Abbasi
Keyword(s):  
Discrete Model ◽  
Chaotic Behavior ◽  
Current Control ◽  
Buck Converter ◽  
Control Mode

scholarly journals A Cost-Effective Decentralized Control for AC-Stacked Photovoltaic Inverters

Energies ◽  
2018 ◽  
Vol 11 (9) ◽  
pp. 2262 ◽  
Author(s):  
Hua Han ◽  
Chao Luo ◽  
Xiaochao Hou ◽  
Mei Su ◽  
Wenbin Yuan ◽  
...  
Keyword(s):  
Decentralized Control ◽  
Cost Effective ◽  
Current Control ◽  
Control Mode ◽  
Communication Link ◽  
Grid Voltage ◽  
Point Tracking ◽  
Pv Inverter ◽  
Communication Links ◽  
Voltage Phase

For an AC-stacked photovoltaic (PV) inverter system with N cascaded inverters, existing control methods require at least N communication links to acquire the grid synchronization signal. In this paper, a novel decentralized control is proposed. For N inverters, only one inverter nearest the point of common coupling (PCC) needs a communication link to acquire the grid voltage phase and all other N − 1 inverters use only local measured information to achieved fully decentralized local control. Specifically, one inverter with a communication link utilizes the grid voltage phase and adopts current control mode to achieve a required power factor (PF). All other inverters need only local information without communication links and adopt voltage control mode to achieve maximum power point tracking (MPPT) and self-synchronization with grid voltage. Compared with existing methods, the communication link and complexity is greatly reduced, thus improved reliability and reduced communication costs are achieved. The effectiveness of the proposed control is verified by simulation tests.

Study on Reactive Power Compensation Control of STATCOM Based on MMC

2014 ◽  
Vol 530-531 ◽  
pp. 1022-1025
Author(s):  
Yan Xie ◽  
Ya Ne Liao ◽  
Hong Xie
Keyword(s):  
Reactive Power ◽  
Power Level ◽  
Response Speed ◽  
Reactive Power Compensation ◽  
Current Control ◽  
Control Mode ◽  
Compensation Control ◽  
Control Response ◽  
In Series ◽  
Level Converter

This paper introduced a new modular multi-level converter (MMC), which could enhance the voltage and power level by sub-converter modules in series and was easy to extend to any level of output. Its structure and working mechanism were described. By analyzing the performance of STATCOM based on MMC working conditions in the reactive power compensation, this paper studied compensation control theory in reactive changing conditions. To obtain compensation control response speed faster and better compensation effect, a compensation control strategy was proposed based on direct current control mode. The simulation results show the strategy has a better tracking precision and response speed for the reactive power compensation.

H∞ Control to the BUCK-Type Switching Power Supply with Small Perturbation

2013 ◽  
Vol 347-350 ◽  
pp. 1358-1362
Author(s):  
Zi Сheng Li ◽  
Li Xu ◽  
Bao Shan Yuan
Keyword(s):  
Power Supply ◽  
Current Control ◽  
Control Mode ◽  
State Variables ◽  
Switching Power Supply ◽  
Small Perturbations ◽  
Switching Power ◽  
Current Sampling ◽  
Output Filter ◽  
Filter Capacitor

The purpose in this paper is the design of the control to switching power supply for small perturbations. By the theoretical analysis and calculation, with the output filter inductor current and filter capacitor voltage switching power supply as two state variables, the conclusion is that control of the output filter inductor current sampling do well in the anti-jamming. The simulation is made for verification. And comparing the results, the current control mode shows a very strong anti-interference ability.

scholarly journals Design of Supervisory Control for Speed Control of Wind Turbine using Torque-Control Method Based on Buck Converter

2020 ◽  
Vol 190 ◽  
pp. 00019
Author(s):  
Katherin Indriawati ◽  
Choirul Mufit ◽  
Andi Rahmadiansah
Keyword(s):  
Wind Turbine ◽  
Wind Turbines ◽  
Supervisory Control ◽  
Control Method ◽  
Speed Control ◽  
Buck Converter ◽  
Torque Control ◽  
Control Mode ◽  
Rotor Speed ◽  
Integral Control

The variation of wind speed causes the electric power generated by the turbine also varies. To obtain maximum power, the rotor speed of wind turbines must be optimally rated. The rotor speed can be controlled by manipulating the torque from the generator; this method is called Torque Control. In that case, a DC-DC converter is needed as the control actuator. In this study, a buck converter-based supervisory control design was performed on the Horizontal-axis wind turbines (HAWT). Supervisory control is composed of two control loops arranged in cascade, and there is a formula algorithm as the supervisory level. The primary loop uses proportional control mode with a proportional gain of 0.3, whereas in the secondary loop using proportional-integral control mode with a proportional gain of 5.2 and an integral gain of 0.1. The Supervisory control has been implemented successfully and resulted in an average increase in turbine power of 4.1 % at 5 m s–1 and 10.58 % at 6 m s–1 and 11.65 % at 7 m s–1, compared to wind turbine systems without speed control.

scholarly journals A solar fed BLDC motor drive for mixer grinder using a buck converter

2020 ◽  
Vol 10 (2) ◽  
pp. 1113
Author(s):  
Deekshitha S. Nayak ◽  
R. Shivarudraswamy
Keyword(s):  
Load Condition ◽  
Performance Comparison ◽  
Current Control ◽  
Buck Converter ◽  
Small Scale ◽  
Motor Drive ◽  
Bldc Motor ◽  
Brushless Dc ◽  
Photovoltaic Array ◽  
Simulated System

In large and small scale applications, different kinds of variable speed driving systems can be found. For saving the energy consumption of these devices, eco-friendly electronics are used, which lead to the development of the Brushless DC motor (BLDC). Its higher power density, higher efficiency, higher torque at low speed, and low maintenance enhances the use of a BLDC motor. The existing mixer grinder consists of the universal motor, which operates in alternating current supply due to high starting torque characteristics and simple controlling of the speed. The absence of brushes and the reduction of noise in the BLDC extends its life and makes it ideal in a mixer grinder. A solar-powered BLDC motor drive for a mixer grinder is presented in this paper. A DC-DC buck converter is utilized to operate the PV (photovoltaic) array at its maximum power. The proposed hysteresis current control BLDC system has been developed in the MATLAB. The commercially available mixer grinder is presented along with the proposed simulated system for performance comparison. It can be concluded that at the no load condition, the efficiency of the experimental existing mixer grinder is 51.03% and simulated proposed system is 81.25% and at load condition, the efficiency of the experimental mixer grinder is 49.32% and simulated system is 79.85%.

Quasi-Periodicity, Chaos and Coexistence in the Time Delay Controlled Two-Cell DC–DC Buck Converter

2014 ◽  
Vol 24 (10) ◽  
pp. 1450124 ◽  
Author(s):  
Karama Koubaâ ◽  
Moez Feki
Keyword(s):  
Numerical Simulation ◽  
Time Delay ◽  
Chaotic Attractor ◽  
Chaotic Behavior ◽  
Buck Converter ◽  
Design Parameters ◽  
Bifurcation And Chaos ◽  
Different Types ◽  
2D Torus ◽  
Discrete Map

In addition to border collision bifurcation, the time delay controlled two-cell DC/DC buck converter is shown to exhibit a chaotic behavior as well. The time delay controller adds new design parameters to the system and therefore the variation of a parameter may lead to different types of bifurcation. In this work, we present a thorough analysis of different scenarios leading to bifurcation and chaos. We show that the time delay controlled two-cell DC/DC buck converter may also exhibit a Neimark–Sacker bifurcation which for some parameter set may lead to a 2D torus that may then break yielding a chaotic behavior. Besides, the saturation of the controller can also lead to the coexistence of a stable focus and a chaotic attractor. The results are presented using numerical simulation of a discrete map of the two-cell DC/DC buck converter obtained by expressing successive crossings of Poincaré section in terms of each other.

Artificial Neural Network Based on a Predictive Current Control in a DC-DC Buck Converter

2021 ◽  
Author(s):  
Jazmin Ramirez-Hernandez ◽  
Leobardo Hernandez-Gonzalez ◽  
Oswaldo Ulises Juarez-Sandoval ◽  
Jose Pablo Garcia-Fernandez ◽  
Marcos Yair Bote-Vazquez
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Current Control ◽  
Buck Converter ◽  
Artificial Neural

scholarly journals Fault Ride through Capability Augmentation of a DFIG-Based Wind Integrated VSC-HVDC System with Non-Superconducting Fault Current Limiter

2019 ◽  
Vol 11 (5) ◽  
pp. 1232 ◽  
Author(s):  
Md Alam ◽  
Mohammad Abido ◽  
Alaa Hussein ◽  
Ibrahim El-Amin
Keyword(s):  
Control Strategy ◽  
Reactive Power ◽  
Current Control ◽  
Control Mode ◽  
Voltage Source ◽  
Fault Current ◽  
Fault Current Limiter ◽  
Hvdc System ◽  
Fault Ride Through ◽  
Current Limiter

This paper proposes a non-superconducting bridge-type fault current limiter (BFCL) as a potential solution to the fault problems of doubly fed induction generator (DFIG) integrated voltage source converter high-voltage DC (VSC-HVDC) transmission systems. As the VSC-HVDC and DFIG systems are vulnerable to AC/DC faults, a BFCL controller is developed to insert sizeable impedance during the inception of system disturbances. In the proposed control scheme, constant capacitor voltage is maintained by the stator VSC (SVSC) controller, while current extraction or injection is achieved by rotor VSC (RVSC) controller. Current control mode-based active and reactive power controllers for an HVDC system are developed. Balanced and different unbalanced faults are applied in the system to show the effectiveness of the proposed BFCL solution. A DFIG wind-based VSC-HVDC system, BFCL, and their controllers are implemented in a real time digital simulator (RTDS). The performance of the proposed BFCL control strategy in DFIG-based VSC-HVDC system is compared with a series dynamic braking resistor (SDBR). Comparative RTDS implementation results show that the proposed BFCL control strategy is very efficient in improving system fault ride through (FRT) capability and outperforms SDBR in all cases considered.

Sign in / Sign up

Export Citation Format

Share Document