Chemical composition of clay minerals and shales of Anatolian Tertiary sediments: A global interpretation

1979 ◽  
Vol 26 (3-4) ◽  
pp. 311-320
Author(s):  
G. Ataman
2018 ◽  
Vol 25 (1-2) ◽  
Author(s):  
Pavla Tomanová Petrová ◽  
David Buriánek ◽  
Karel Kirchner ◽  
Oldřich Krejčí ◽  
František Laufek ◽  
...  

The reddish coloured sediment layers (up to 5 m thick) were found within building pit in the Brno-Kohoutovice on the Libušina třída Avenue (NW part of Brno). These sediments were assigned to the Ottnangian based on characteristic pseudoassociation of microfossils. Smectite or illite/smectite dominates over kaolinite among the clay minerals. Minerals typomorphic for granitoids of the Brno Massif, i.e. epidote, amphibole and altered titanite, absolutely dominate (99 mod. %) within the assemblage of translucent heavy fraction. Minerals like garnet and staurolite which are typical for the Ottnangian sediments in this region, are presented only in accessoric amount. The chemical composition of the studied sediments is located between the chemical composition of granodiorites of the Brno Massif and Neogene clays. Relatively high content of Zr, Hf and HREE, which is interpreted as result of presence of very fine grained zircon in studied sediments, is characteristic. High content of SiO2 and comparatively low contents of Al2O3 and Fe2O3 indicates non-lateritic type of weathering. The chemical composition of studied sediments reflects semiarid to humid paleoclimate that the granitoids of the Brno Massif as parent rock have undergone.


Clay Minerals ◽  
1976 ◽  
Vol 11 (2) ◽  
pp. 121-135 ◽  
Author(s):  
J. Ducloux ◽  
A. Meunier ◽  
B. Velde

AbstractThree soil profiles developed on a serpentinite body (La Rochel'Abeille, near Limoges) show three stages of weathering. All soils contain iron-rich smectites and secondary chlorites. The latter are very silica-rich, more so than 14 Å chlorites from crystalline rocks. In the (B)1g horizon of the hydromorphic profile, these minerals seem to give a reaction of the type:This reaction, typical of a closed system, appears to be operative in a soil profile which is certainly, in part, open to chemical migration. The chemistry of the weathered serpentinite and the chemical composition of newly formed minerals as well as those of the serpentinite are used to indicate the chemiographic relations of clay minerals formed in the weathering profiles.


Author(s):  
I. C. Das ◽  
J. Joseph ◽  
S. K. Subramanian ◽  
V. K. Dadhwal

Absorption features that occur in reflectance spectra are a sensitive indicator of mineralogy and chemical composition for a wide variety of materials. The investigation of the mineralogy and chemical composition of surfaces give information about the origin and evolution of planetary bodies. On Mars, the processes of formation of different types of clay minerals result from different types of wet conditions viz. hydrothermalism, subsurface/groundwater weathering, surface alteration etc. The image analyzed in the present study was frt000947f- 164-trr3 (−27.87N–65.06E). Through the spectral stratigraphic characterization along a crater wall, eight (8) different layers were identified considering the spectral variability and their position. In Hellas Planitia, the alteration minerals identified by CRISM based on distinctive absorptions from 0.4 to3.9 μm include Al-rich smectite, montmorillonite, phyllosilicate mineral at 2.2 μm and 2.35 μm, including strong absorption feature noticed at 1.9 μm. We conclude that the layers exposed in the crater wall help characterize the compositional stratigraphy for confirming the presence of hydrated minerals in this region as an outcome of geohydrological weathering process.


The physicochemical properties of smectite clay minerals that determine their industrial utilization are reviewed. Smectite is the name used for a group of phyllosilicate mineral species, the most important of which are montmorillonite, beidellite, nontronite, saponite and hectorite. These and several other less common species are differentiated by variations in chemical composition involving substitutions of Al for Si in tetrahedral cation sites and Al, Fe, Mg and Li in octahedral cation sites. Smectite clays have a variable net negative charge, which is balanced by Na, Ca, Mg and, or, H adsorbed externally on interlamellar surfaces. The structure, chemical composition, exchangeable ion type and small crystal size of smectite clays are responsible for several unique properties, including a large chemically active surface area, a high cation exchange capacity, interlamellar surfaces having unusual hydration characteristics, and sometimes the ability to modify strongly the flow behaviour of liquids. In terms of major industrial and chemical uses, natural smectite clays can be divided into three categories, Na smectites, Ca-Mg smectites and Fuller’s or acid earths. Large volumes of Na smectites and Na-exchanged Ca-M g smectites and Fuller’s earth are directly used in the foundry, oil well drilling, wine, and iron ore and feed pelletizing industries, and are also used in civil engineering to impede water movement. Significant volumes of Na smectites are used for various purposes in the manufacturing of many industrial, chemical and consumer products. Large quantities of Ca-M g smectites are used directly in iron foundries, in agricultural industries and for filtering and decolorizing various types of oils. A significant fraction of the Ca-M g smectites used for decolorizing has been acid treated. Large volumes of Fuller’s or acid earths are commercially used for preparing animal litter trays and oil and grease absorbents, as carriers for insecticides, and for decolorizing of oils and fats. Natural Na smectites occur in commercial quantities in only a few places, but Ca-M g smectite and Fuller’s earth deposits of considerable size occur on almost every continent.


2019 ◽  
Vol 9 (1) ◽  
Author(s):  
Pierre Jacquemot ◽  
Jean-Christophe Viennet ◽  
Sylvain Bernard ◽  
Corentin Le Guillou ◽  
Baptiste Rigaud ◽  
...  

AbstractExpanding our capabilities to unambiguously identify ancient traces of life in ancient rocks requires laboratory experiments to better constrain the evolution of biomolecules during advanced fossilization processes. Here, we submitted RNA to hydrothermal conditions in the presence of a gel of Al-smectite stoichiometry at 200 °C for 20 days. NMR and STXM-XANES investigations revealed that the organic fraction of the residues is no longer RNA, nor the quite homogeneous aromatic-rich residue obtained in the absence of clays, but rather consists of particles of various chemical composition including amide-rich compounds. Rather than the pure clays obtained in the absence of RNA, electron microscopy (SEM and TEM) and diffraction (XRD) data showed that the mineralogy of the experimental residues includes amorphous silica and aluminosilicates mixed together with nanoscales phosphates and clay minerals. In addition to the influence of clay minerals on the degradation of organic compounds, these results evidence the influence of the presence of organic compounds on the nature of the mineral assemblage, highlighting the importance of fine-scale mineralogical investigations when discussing the nature/origin of organo-mineral microstructures found in ancient rocks.


2015 ◽  
Vol 820 ◽  
pp. 570-575
Author(s):  
B.E.D.B.S. Martins ◽  
A.C. Cunha ◽  
L. Yokoyama ◽  
Valeria C. Almeida

The WTPs generate a residue in decanters called sludge, which, despite having a similar chemical composition of clay minerals, does not behave as such when embedded in such clays. Several surveys conducted indicate a decrease in Flexural Strength for the ceramic body when incorporated. The objective of this study is to evaluate the incorporation of the sludge generated at a WTP, which uses aluminum sulfate coagulant, to clay. By the method of pressure casting, samples were prepared with different percentages of sludge containing the said coagulant. Test runs with previously calcined sludge at 700°C were also performed in order to obtain sludge without the coagulant. In both cases, the final bodies were fired at 900°C and were tested for water absorption and flexural strength. The results reveal that the incorporation of non-calcined sludge positively change the quality of the ceramics prepared.


2004 ◽  
Vol 36 (1) ◽  
pp. 19
Author(s):  
Α. Καστρίνάκη ◽  
Α. Τσιραμπίδης ◽  
Κ. Μιχαηλίδης ◽  
Γ. Τρώντσιος

Mudstone formations samples from the Thessaloniki and Chalkidiki prefectures are investigated, in respect to their suitability as raw materials for the ceramic industry. In particular, the investigation concerned the determination of the mineralogical and chemical composition of the studied sample. Quartz and feldspars are the major mineralogical constituents, whereas micas, clay minerals and carbonates were detected in various amounts, follow. The samples are evaluated, concerning their suitability for ceramics production, namely majiolica, cottoforte, gre and bricks, on the basis of their chemical composition and in accordance to Si02-Al203-Fe203t, Si02 (Fe203t+K20+Na20+CaO+MgO)-(AI203+Ti02) and Fe203t-(CaO+MgO)-(K20+Na20) triangular diagrams. The general conclusion is that, most of the studied materials are unsuitable for high quality ceramics products. By contrast, some of them could be tested for the production of bricks and roofing tiles.


Clay Minerals ◽  
1999 ◽  
Vol 34 (2) ◽  
pp. 247-257 ◽  
Author(s):  
A. P. Menegatti ◽  
G. L. Früh-Green ◽  
P. Stille

AbstractThe use of disodium peroxodisulphate combined with a neutral buffer is a new method for the efficient removal of organic matter from clay-bearing sediments. The effects of this oxidation procedure on mineral structure were investigated by treatment of different standard clay minerals (kaolinite ‘china clay’, illite ‘Le Puy’, montmorillonite SWy-1). The materials were characterized by means of XRD, FTIR, SEM and TEM before and after leaching with disodium peroxodisulphate. Systematic experiments were conducted to determine the effects of leaching on the chemical and isotopic composition of oxygen, hydrogen and K-Ar in these samples. Effects on the physicochemical properties of the clays such as BET external surface area, cation exchange capacity (CEC) and expandability with ethylene glycol were also investigated. The results show that structure, chemical composition, oxygen and hydrogen isotope ratios, as well as the K-Ar system remain unaffected by leaching with disodium peroxodisulphate. The CEC and expandability remain unchanged, whereas changes in BET area can be attributed to mechanical dispersion by ultrasonic treatment.


Sign in / Sign up

Export Citation Format

Share Document