Alternating melting points, heats and entropies of fusion of linear aliphatic polyesters

1978 ◽  
Vol 14 (12) ◽  
pp. 1045-1049 ◽  
Author(s):  
K. Ueberretter ◽  
V.-H. Karl ◽  
A. Altmeyer
2018 ◽  
Author(s):  
Nicolò Bontempi ◽  
Irene Vassalini ◽  
Stefano Danesi ◽  
Matteo Ferroni ◽  
Paolo Colombi ◽  
...  

<p>Here we investigate for the first time the opto-thermal behavior of SiO<sub>2</sub>/Si core/shell microbeads (Si-rex) irradiated with three common Raman laser sources (lambda=532, 633, 785 nm) under real working conditions. We obtained an experimental proof of the critical role played by bead size and aggregation in heat and light management, demonstrating that in the case of strong opto-thermal coupling the temperature can exceed that of the melting points of both core and shell components. In addition, we also show that weakly coupled beads can be utilized as stable substrates for plasmon-free SERS experiments.</p>


Author(s):  
Bong‐Seop Lee ◽  
Michel Vert ◽  
Eggehard Holler

Author(s):  
Ann‐Christine Albertsson ◽  
Indra K. Varma
Keyword(s):  

1981 ◽  
Vol 64 (4) ◽  
pp. 875-883
Author(s):  
Shiv K Soni ◽  
Daniel Van Gelder

Abstract Due to the existence of 2 asymmetric carbon atoms in: the propoxyphene molecule, there are 4 diastereomers: alpha dextro, alpha levo, beta dextro, and beta levo. Only α-d-propoxyphene is included under the federal Controlled Substances Act. Baseline separations of propoxyphene from various incipients (aspirin, caffeine, phenacetin, and acetaminophen) present in pharmaceutical and illicit preparations, and between the alpha and beta diastereomers, were achieved by high pressure liquid chromatography. The column eluant was collected and propoxyphene was extracted. The optical isomers were differentiated and characterized by melting points and by chemical microcrystalline tests. Using hot stage thermomicroscopy, the eutectic melting points of binary isomeric mixtures of propoxyphene bases and salts were found to be depressed about 10° and 15-30°C, respectively, below the individual isomer melting points. The characteristic microcrystals formed with the alpha racemic mixtures by using a glycerin-aqueous gold chloride reagent were not produced by the beta racemic mixtures.


2013 ◽  
Vol 21 (8) ◽  
pp. 833-842 ◽  
Author(s):  
Sakthivel Gandhi ◽  
Swaminathan Sethuraman ◽  
Uma Maheswari Krishnan
Keyword(s):  

2021 ◽  
Vol 14 (1) ◽  
Author(s):  
Shihong Liu ◽  
Michael Gonzalez ◽  
Celine Kong ◽  
Scott Weir ◽  
Aaron M. Socha

Abstract Background Ionic liquids (ILs) are promising pretreatment solvents for lignocellulosic biomass, but are largely prepared from petroleum precursors. Benzaldehydes from depolymerized lignin, such as vanillin, syringaldehyde, and 4-methoxy benzaldehyde, represent renewable feedstocks for the synthesis of ionic liquids. We herein report syntheses of novel lignin-derived ionic liquids, with extended N-alkyl chains, and examine their melting points, cellulose dissolution capacities, and toxicity profiles against Daphnia magna and E. coli strain 1A1. The latter organism has been engineered to produce isoprenol, a drop-in biofuel and precursor for commodity chemicals. Results The new N,N-diethyl and N,N-dipropyl methyl benzylammonium ILs were liquids at room temperature, showing 75–100 °C decreased melting points as compared to their N,N,N-trimethyl benzylammonium analog. Extension of N-alkyl chains also increased antibacterial activity threefold, while ionic liquids prepared from vanillin showed 2- to 4-fold lower toxicity as compared to those prepared from syringaldehyde and 4-methoxybenzaldehyde. The trend of antibacterial activity for anions of lignin-derived ILs was found to be methanesulfonate < acetate < hydroxide. Microcrystalline cellulose dissolution, from 2 to 4 wt% after 20 min at 100 °C, was observed in all new ILs using light microscopy and IR spectroscopy. Conclusions Ionic liquids prepared from H-, S- and G-lignin oxidation products provided differential cytotoxic activity against E. coli and D. magna, suggesting these compounds could be tailored for application specificity within a biorefinery.


1981 ◽  
Vol 26 (11) ◽  
pp. 3779-3787 ◽  
Author(s):  
C. G. Pitt ◽  
F. I. Chasalow ◽  
Y. M. Hibionada ◽  
D. M. Klimas ◽  
A. Schindler
Keyword(s):  

Materials ◽  
2021 ◽  
Vol 14 (1) ◽  
pp. 181
Author(s):  
Roberto De Santis ◽  
Teresa Russo ◽  
Julietta V. Rau ◽  
Ida Papallo ◽  
Massimo Martorelli ◽  
...  

A wide range of materials has been considered to repair cranial defects. In the field of cranioplasty, poly(methyl methacrylate) (PMMA)-based bone cements and modifications through the inclusion of copper doped tricalcium phosphate (Cu-TCP) particles have been already investigated. On the other hand, aliphatic polyesters such as poly(ε-caprolactone) (PCL) and polylactic acid (PLA) have been frequently investigated to make scaffolds for cranial bone regeneration. Accordingly, the aim of the current research was to design and fabricate customized hybrid devices for the repair of large cranial defects integrating the reverse engineering approach with additive manufacturing, The hybrid device consisted of a 3D additive manufactured polyester porous structures infiltrated with PMMA/Cu-TCP (97.5/2.5 w/w) bone cement. Temperature profiles were first evaluated for 3D hybrid devices (PCL/PMMA, PLA/PMMA, PCL/PMMA/Cu-TCP and PLA/PMMA/Cu-TCP). Peak temperatures recorded for hybrid PCL/PMMA and PCL/PMMA/Cu-TCP were significantly lower than those found for the PLA-based ones. Virtual and physical models of customized devices for large cranial defect were developed to assess the feasibility of the proposed technical solutions. A theoretical analysis was preliminarily performed on the entire head model trying to simulate severe impact conditions for people with the customized hybrid device (PCL/PMMA/Cu-TCP) (i.e., a rigid sphere impacting the implant region of the head). Results from finite element analysis (FEA) provided information on the different components of the model.


2008 ◽  
Vol 580-582 ◽  
pp. 319-322 ◽  
Author(s):  
Manabu Tanaka ◽  
Kentaro Yamamoto ◽  
Tashiro Shinichi ◽  
John J. Lowke

Study of current attachment at thermionic cathode for TIG arc at atmospheric pressure is attempted from numerical calculations of arc-electrodes unified model. The calculations show that the maximum temperature of arc plasma close to the cathode tip for W-2% ThO2 reaches 19,000 K and it is the highest value in comparison with the other temperatures for W-2% La2O3 and W-2% CeO2, because the current attachment at the cathode tip is constricted by a centralized limitation of liquid area of ThO2 due to its higher melting point. The calculations also show that, in cases of W- 2% La2O3 and W-2% CeO2, the liquid areas of La2O3 and Ce2O3 are widely expanded at the cathode tip due to their lower melting points and then produce uniform current attachments at the cathode. It is concluded that the current attachment at thermionic cathode is strongly dependent on work function, melting point and Richardson constant of emitter materials.


Sign in / Sign up

Export Citation Format

Share Document