Suction feeding biomechanics of Polypterus bichir: investigating linkage mechanisms and the contributions of cranial kinesis to oral cavity volume change

Many fishes use substantial cranial kinesis to rapidly increase buccal cavity volume, pulling prey into the mouth via suction feeding. Living polypterids are a key lineage for understanding the evolution and biomechanics of suction feeding due to their phylogenetic position and unique morphology. Polypterus bichir have fewer mobile cranial elements compared to teleosts (e.g., immobile [pre]maxillae) but successfully generate suction through dorsal, ventral, and lateral oral cavity expansion. However, the relative contributions of these motions to suction feeding success have not been quantified. Additionally, extensive body musculature and lack of opercular jaw opening linkages make P. bichir of interest for examining the role of cranial vs. axial muscles in driving mandibular depression. Here we analyze the kinematics of buccal expansion during suction feeding in P. bichir using X-Ray Reconstruction of Moving Morphology (XROMM) and quantify the contributions of skeletal elements to oral cavity volume expansion and prey capture. Mouth gape peaks early in the strike, followed by maximum cleithral and ceratohyal rotations, and finally by opercular and suspensorial abductions, maintaining the anterior-to-posterior movement of water. Using a new method of quantifying bones’ relative contributions to volume change (RCVC) we demonstrate that ceratohyal kinematics are the most significant drivers of oral cavity volume change. All measured cranial bone motions, except abduction of the suspensorium, are correlated with prey motion. Lastly, cleithral retraction is largely concurrent with ceratohyal retraction and jaw depression while the sternohyoideus maintains constant length, suggesting a central role of the axial muscles, cleithrum, and ceratohyal in ventral expansion.

Primary Ewing sarcoma/peripheral primitive neuroectodermal tumors in the cranial bone and mobile spine: what is the difference?

Background Primary Ewing sarcoma (ES)/peripheral primitive neuroectodermal tumors (pPNETs) are aggressive bone tumors that rarely occur in the axial skeleton, including the cranial bone and mobile spine. The purpose of this study was to investigate whether there were any differences in patient characteristics, treatment strategies, and outcomes between patients with ES/pPNETs of the cranial bone and those with ES/pPNETs of the mobile spine. Methods A retrospective study was performed on 33 patients with ES/pPNETs who had been surgically treated and pathologically confirmed at our institution between 2010 and 2020. Patient characteristics were compared using Fisher exact tests or independent t tests. Survival rates were estimated via Kaplan–Meier survival analysis and compared using log-rank tests. Results Thirteen patients had ES/pPNETs of the cranial bone (39.4%), while 20 patients had ES/pPNETs of the mobile spine (60.6%). Patients with ES/pPNETs of the cranial bone had a younger mean age (14.8 vs 22.6 years; p = 0.047) and longer mean disease duration (2.5 vs 1.9 months; p = 0.008) compared with those of patients with ES/pPNETs of the mobile spine. Kaplan–Meier analysis showed that gross total resection (GTR) and radiotherapy resulted in a longer median survival time. The overall survival rates and progression-free survival rates of patients with ES/pPNETs of the cranial bone versus those of the mobile spine were not significantly different (p = 0.386 and p = 0.368, respectively). Conclusions Patients with ES/pPNETs of the cranial bone were younger compared to patients with ES/pPNETs of the mobile spine. There was no significant difference in the prognosis of patients with ES/pPNETs of the cranial bone versus those of the mobile spine. Taken together, our findings suggest that GTR and radiotherapy offer the best prognosis for improved long-term survival.

A Narrative Review of Cell-Based Approaches for Cranial Bone Regeneration

Current cranial repair techniques combine the use of autologous bone grafts and biomaterials. In addition to their association with harvesting morbidity, autografts are often limited by insufficient quantity of bone stock. Biomaterials lead to better outcomes, but their effectiveness is often compromised by the unpredictable lack of integration and structural failure. Bone tissue engineering offers the promising alternative of generating constructs composed of instructive biomaterials including cells or cell-secreted products, which could enhance the outcome of reconstructive treatments. This review focuses on cell-based approaches with potential to regenerate calvarial bone defects, including human studies and preclinical research. Further, we discuss strategies to deliver extracellular matrix, conditioned media and extracellular vesicles derived from cell cultures. Recent advances in 3D printing and bioprinting techniques that appear to be promising for cranial reconstruction are also discussed. Finally, we review cell-based gene therapy approaches, covering both unregulated and regulated gene switches that can create spatiotemporal patterns of transgenic therapeutic molecules. In summary, this review provides an overview of the current developments in cell-based strategies with potential to enhance the surgical armamentarium for regenerating cranial vault defects.

Localized, time-dependent responses of rat cranial bone to repeated mild traumatic brain injuries

While it is well-established that bone responds dynamically to mechanical loading, the effects of mild traumatic brain injury (mTBI) on cranial bone composition are unclear. We hypothesized that repeated mTBI (rmTBI) would change the microstructure of cranial bones, without gross skull fractures. To address this, young adult female Piebald Viral Glaxo rats received sham, 1x, 2x or 3x closed-head mTBIs delivered at 24h intervals, using a weight drop device custom built for reproducible impact. Skull bones were collected at 2 or 10 weeks after the final injury/sham procedure, imaged by micro computed tomography and analyzed at predetermined regions of interest. In the interparietal bone, proximal to the injury site, modest increases in bone thickness was observed at 2 weeks, particularly following 3x mTBI. By 10 weeks, 2x mTBI induced a robust increase in the volume and thickness of the interparietal bone, alongside a corresponding decrease in the volume of marrow cavities in the diploe region. In contrast, neither parietal nor frontal skull samples were affected by rmTBI. Our findings demonstrate time- and location-dependent effects of rmTBI on cranial bone structure, highlighting a need to consider microstructural alterations to cranial bone when assessing the consequences of rmTBI.

Gene-Activated Matrix with Self-Assembly Anionic Nano-Device Containing Plasmid DNAs for Rat Cranial Bone Augmentation

We have developed nanoballs, a biocompatible self-assembly nano-vector based on electrostatic interactions that arrange anionic macromolecules to polymeric nanomaterials to create nucleic acid carriers. Nanoballs exhibit low cytotoxicity and high transfection efficiently in vivo. This study investigated whether a gene-activated matrix (GAM) composed of nanoballs containing plasmid (p) DNAs encoding bone morphogenetic protein 4 (pBMP4) could promote bone augmentation with a small amount of DNA compared to that composed of naked pDNAs. We prepared nanoballs (BMP4-nanoballs) constructed with pBMP4 and dendrigraft poly-L-lysine (DGL, a cationic polymer) coated by γ-polyglutamic acid (γ-PGA; an anionic polymer), and determined their biological functions in vitro and in vivo. Next, GAMs were manufactured by mixing nanoballs with 2% atelocollagen and β-tricalcium phosphate (β-TCP) granules and lyophilizing them for bone augmentation. The GAMs were then transplanted to rat cranial bone surfaces under the periosteum. From the initial stage, infiltrated macrophages and mesenchymal progenitor cells took up the nanoballs, and their anti-inflammatory and osteoblastic differentiations were promoted over time. Subsequently, bone augmentation was clearly recognized for up to 8 weeks in transplanted GAMs containing BMP4-nanoballs. Notably, only 1 μg of BMP4-nanoballs induced a sufficient volume of new bone, while 1000 μg of naked pDNAs were required to induce the same level of bone augmentation. These data suggest that applying this anionic vector to the appropriate matrices can facilitate GAM-based bone engineering.

Transplantation of rat cranial bone-derived mesenchymal stem cells promotes functional recovery in rats with spinal cord injury

Cell-based therapy using mesenchymal stem cells (MSCs) is a novel treatment strategy for spinal cord injury (SCI). MSCs can be isolated from various tissues, and their characteristics vary based on the source. However, reports demonstrating the effect of transplanted rat cranial bone-derived MSCs (rcMSCs) on rat SCI models are lacking. In this study, we determined the effect of transplanting rcMSCs in rat SCI models. MSCs were established from collected bone marrow and cranial bones. SCI rats were established using the weight-drop method and transplanted intravenously with MSCs at 24 h post SCI. The recovery of motor function and hindlimb electrophysiology was evaluated 4 weeks post transplantation. Electrophysiological recovery was evaluated by recording the transcranial electrical stimulation motor-evoked potentials. Tissue repair after SCI was assessed by calculating the cavity ratio. The expression of genes involved in the inflammatory response and cell death in the spinal cord tissue was assessed by real-time polymerase chain reaction. The transplantation of rcMSCs improved motor function and electrophysiology recovery, and reduced cavity ratio. The expression of proinflammatory cytokines was suppressed in the spinal cord tissues of the rats that received rcMSCs. These results demonstrate the efficacy of rcMSCs as cell-based therapy for SCI.

Genome Wide Association Metanalysis Of Skull Bone Mineral Density Identifies Loci Relevant For Osteoporosis And Craniosynostosis

Skull bone mineral density (SK-BMD) provides a suitable trait for the discovery of genes important to bone biology in general, and particularly for identifying components unique to intramembranous ossification, which cannot be captured at other skeletal sites. We assessed genetic determinants of SK-BMD in 43,800 individuals, identifying 59 genome-wide significant loci (4 novel), explaining 12.5% of its variance. Pathway and enrichment analyses of the association signals resulted in clustering within gene-sets involved in regulating the development of the skeleton; overexpressed in the musculoskeletal system; and enriched in enhancer and transcribed regions in osteoblasts. From the four novel loci (mapping to ZIC1, PRKAR1A, ATP6V1C1, GLRX3), two (ZIC1 and PRKAR1A) have previously been related to craniofacial developmental defects. Functional validation of skull development in zebrafish revealed abnormal cranial bone initiation that culminated in ectopic sutures and reduced BMD in mutated zic1 and atp6v1c1 fish and asymmetric bone growth and elevated BMD in mutated prkar1a fish. We confirmed a role of ZIC1 loss-of-function in suture patterning and discovered ATP6V1C1 gene associated with suture development. In light of the evidence presented suggesting that SK-BMD is genetically related to craniofacial abnormalities, our study opens new avenues to the understanding of the pathophysiology of craniofacial defects and towards the effective pharmacological treatment of bone diseases.