THE STORAGE OF COAL—OXIDATION AND SPONTANEOUS COMBUSTION

Author(s):  
WILFRID FRANCIS
2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Li Shen ◽  
Qiang Zeng

AbstractIn the present paper, with using diverse methods (including the SEM, the XRD, the TPO, the FTIR, and the TGA) , the authors analysed samples of the major coal seam in Dahuangshan Mining area with different particle sizes and with different heated temperatures (from 50 to 800 °C at regular intervals of 50 °C). The results from SEM and XRD showed that high temperature and high number of pores, fissures, and hierarchical structures in the coal samples could facilitate oxidation reactions and spontaneous combustion. A higher degree of graphitization and much greater number of aromatic microcrystalline structures facilitated spontaneous combustion. The results from TPO showed that the oxygen consumption rate of the coal samples increased exponentially with increasing temperature. The generation rates of different gases indicated that temperatures of 90 °C or 130 °C could accelerate coal oxidation. With increasing temperature, the coal oxidation rate increased, and the release of gaseous products was accelerated. The FTIR results showed that the amount of hydroxide radicals and oxygen-containing functional groups increased with the decline in particle size, indicating that a smaller particle size may facilitate the oxidation reaction and spontaneous combustion of coal. The absorbance and the functional group areas at different particle sizes were consistent with those of the heated coal samples, which decreased as the temperature rose. The results from TGA showed that the characteristic temperature T3 declined with decreasing particle size. After the sample with 0.15–0.18 mm particle size was heated, its carbon content decreased, and its mineral content increased, inhibiting coal oxidation. This result also shows that the activation energy of the heated samples tended to increase at the stage of high-temperature combustion with increasing heating temperature.


Fuel ◽  
2022 ◽  
Vol 307 ◽  
pp. 121806
Author(s):  
Cai-ping Wang ◽  
Yin Deng ◽  
Yu-tao Zhang ◽  
Yang Xiao ◽  
Jun Deng ◽  
...  

2021 ◽  
Vol 8 ◽  
Author(s):  
Liancong Wang ◽  
Weizhao Hu ◽  
Yuan Hu

In the goaf of the coal mine, there will be some high-temperature points before or during the fire. Under certain conditions, these high-temperature points will radiate heat to the surrounding coal in the form of thermal radiation, which, in turn, may also ignite the coal. Taking this situation into consideration, this study aims to investigate the influence of high-temperature thermal radiation on the transformation characteristics of coal oxidation and spontaneous combustion using the high-temperature thermal radiation method. The results show that an increase in thermal radiation value reduces the ignition time of coal gradually. The peak heat release rate, total heat release, peak smoke release rate, and total smoke release gradually increase. Additionally, the total carbon monoxide release reduces gradually, and the peak carbon dioxide production rate increases gradually. It is worth noting that as the heat radiation value increases, the peak value of CO production rate of lignite and bituminous coal is noted to decrease gradually, whereas that of anthracite increases gradually. The total carbon dioxide emissions of bituminous coal and anthracite increased gradually, whereas the total carbon dioxide emissions of lignite increased firstly and then decreased. This work proposes a novel method to study the coal oxidation and spontaneous combustion by a widely-recognized combustion apparatus.


2021 ◽  
Vol 45 (4) ◽  
pp. 317-327
Author(s):  
Yongfei Jin ◽  
Li Yan ◽  
Yin Liu ◽  
Chuansheng Li

In order to solve the shortcomings of the traditional mining anti-extinguishing gel material such as low strength and poor water retention, a high hydrocolloid anti-extinguishing material was developed with sodium alginate and light calcium carbonate as the base material and gluconolactone as the retarder, which was mixed and reacted. The base material ratio of highly efficient water-retaining colloidal material for coal void filling was determined as 2% SA + 0.5% PCC + 1% GDL with a moulding time of 4.5 min, while the base material ratio of highly efficient water-retaining colloidal material for extinguishing high temperature fires was 2.5% SA + 1% PCC + 1% GDL with a moulding time of 2.5 min. The highly efficient water-retaining colloidal material was found to reduce the concentration of signature gas and delay the characteristic temperature point and increase the activation energy of coal oxidation, which indicates that the highly efficient water-retaining colloidal material can effectively inhibit the spontaneous combustion process of coal at low temperature stage. Infrared spectroscopy experiments were conducted to investigate the microscopic resistance mechanism of the highly efficient water-retaining colloidal material, and the results showed that the highly efficient water-retaining colloidal material mainly reduce the activity of Ar-C-O-, -COO-, -CH3, -CH2 and -OH in coal to inhibit the spontaneous combustion of coal.


2013 ◽  
Vol 20 (4) ◽  
pp. 709-718
Author(s):  
Yan-Ming Wang ◽  
Wen-Zheng Wang ◽  
Zhen-Lu Shao ◽  
De-Ming Wang ◽  
Guo-Qing Shi

Abstract Coal spontaneous combustion is an extremely complicated physical and chemical changing process. In order to improve the indicator gases detection technology and coal spontaneous combustion monitoring, a novel forecast method for toxic gases emission from coal oxidation at low temperature is presented in this paper. The experiment system is setup combined with frequency-domain terahertz technology and coal temperature programming device. The concentration curves of carbon monoxide and sulphur dioxide gases from coal spontaneous combustion are estimated according to molecule terahertz spectra. The influences of coal rank and oxygen supply on coal spontaneous combustion characteristics are discussed. Both carbon monoxide and sulphur dioxide gases absorption spectra show the characteristic equi-spaced absorption peaks. Results demonstrate that under the condition of lean oxygen, there exists a critical oxygen concentration in the process of coal oxidation at low temperature. Comparing with Fourier infrared spectrum testing, the presented method is highly accurate and more sensitive, especially suitable for early-stage monitoring of the indicator gases produced by coal spontaneous combustion.


Fractals ◽  
2019 ◽  
Vol 27 (03) ◽  
pp. 1950038 ◽  
Author(s):  
BIAO KONG ◽  
ENYUAN WANG ◽  
ZENGHUA LI ◽  
WEI LU

During coal oxidation and temperature rise, a significantly large amount of electromagnetic radiation (EMR) signals are generated as a result of thermal deformation and thermal cracking. The generation of EMR signal is the comprehensive embodiment of the physical and chemical changes in coal during its oxidation and subsequent heating. Therefore, the generated signals contain complex and rich messages that can reflect the changes in the internal structure of coal. In this work, the characteristics of EMR signal were analyzed by multifractal theory. Multifractal analysis was used to deconstruct EMR signals. Our preliminary study indicated that the multifractal spectrum of the EMR signal had a feature of small probability event. Further analysis demonstrated that the characteristic parameters of EMR signal are quite different at the later heating stage from those at the early heating stage. At the initial stage of coal spontaneous combustion, the multifractal spectrum of the signal is wider, but when coal combustion is reached, the scale range of EMR signal increases significantly, and its structure changes at different temperature ranges. The research results presented provide a basis for monitoring and presenting an early warning of coal spontaneous combustion risk.


Sign in / Sign up

Export Citation Format

Share Document