Large Deflections of Heated Functionally Graded Clamped Rectangular Plates with Varying Rigidity in Thickness Direction

1997 ◽  
pp. 81-86 ◽  
Author(s):  
F. Mizuguchi ◽  
H. Ohnabe
Keyword(s):  
Functionally Graded ◽  
Large Deflections ◽  
Rectangular Plates ◽  
Thickness Direction

Static Analysis of Moderately Thick Functionally Graded Plates With Various Boundary Conditions

2010 ◽  
Author(s):  
Nastaran Shahmansouri ◽  
Mohammad Mohammadi Aghdam ◽  
Kasra Bigdeli
Keyword(s):  
Boundary Conditions ◽  
Volume Fraction ◽  
Closed Form Solution ◽  
Shear Deformation Theory ◽  
Functionally Graded ◽  
Rectangular Plates ◽  
Functionally Graded Plates ◽  
Various Boundary Conditions ◽  
Fg Plates ◽  
Ode Systems

The present study investigates static analyses of moderately thick FG plates. Using the First Order Shear Deformation Theory (FSDT), functionally graded plates subjected to transversely distributed loading with various boundary conditions are studied. Effective mechanical properties which vary from one surface of the plate to the other assumed to be defined by a power law form of distribution. Different ceramic-metal sets of materials are studied. Solution of the governing equations, including five equilibrium and eight constitutive equations, is obtained by the Extended Kantorovich Method (EKM). The system of thirteen Partial Differential Equations (PDEs) in terms of displacements, rotations, force and moment resultants are considered as multiplications of separable function of independent variables x and y. Then by successful utilization of the EKM these equations are converted to a double set of ODE systems in terms of x and y. The obtained ODE systems are then solved iteratively until final convergence is achieved. Closed form solution is presented for these ODE sets. It is shown that the method is very stable and provides fast convergence and highly accurate predictions for both thin and moderately thick plates. Comparison of the normal stresses at various points of rectangular plates and deflection of mid-point of the plate are presented and compared with available data in the literature. The effects of the volume fraction exponent n on the behavior of the normalized deflection, moment resultants and stresses of FG plates are also studied. To validate data for analysis fully clamped FG plates, another analysis was carried out using finite element code ANSYS. Close agreement is observed between predictions of the EKM and ANSYS.

Dynamical Behaviors of Sinusoidal Nanocomposite Plates Subjected to Thermomechanical Loads

2021 ◽  
Author(s):  
Vu Ngoc Viet Hoang ◽  
Dinh Gia Ninh
Keyword(s):  
Thermal Environment ◽  
Plate Theory ◽  
Micromechanical Model ◽  
Functionally Graded ◽  
Geometrical Parameters ◽  
Rectangular Plates ◽  
Sine Function ◽  
Classical Plate Theory ◽  
Wolfram Mathematica ◽  
Number Of Cycles

In this paper, a new plate structure has been found with the change of profile according to the sine function which we temporarily call as the sinusoidal plate. The classical plate theory and Galerkin’s technique have been utilized in estimating the nonlinear vibration behavior of the new non-rectangular plates reinforced by functionally graded (FG) graphene nanoplatelets (GNPs) resting on the Kerr foundation. The FG-GNP plates were assumed to have two horizontal variable edges according to the sine function. Four different configurations of the FG-GNP plates based on the number of cycles of sine function were analyzed. The material characteristics of the GNPs were evaluated in terms of two models called the Halpin–Tsai micromechanical model and the rule of mixtures. First, to verify this method, the natural frequencies of new non-rectangular plates made of metal were compared with those obtained by the Finite Element Method (FEM). Then, the numerical outcomes are validated by comparing with the previous papers for rectangular FGM/GNP plates — a special case of this structure. Furthermore, the impacts of the thermal environment, geometrical parameters, and the elastic foundation on the dynamical responses are scrutinized by the 2D/3D graphical results and coded in Wolfram-Mathematica. The results of this work proved that the introduced approach has the advantages of being fast, having high accuracy, and involving uncomplicated calculation.

Analytical Solutions for Large Deflections of Functionally Graded Beams Based on Layer-Graded Beam Model

2018 ◽  
Vol 10 (09) ◽  
pp. 1850098 ◽  
Author(s):  
Peng Zhou ◽  
Ying Liu ◽  
Xiaoyan Liang
Keyword(s):  
Intensity Factor ◽  
Analytical Solutions ◽  
Large Deflection ◽  
Yield Criterion ◽  
Functionally Graded ◽  
Beam Model ◽  
Large Deflections ◽  
Transverse Loading ◽  
Functionally Graded Beam ◽  
Gradient Variation

The objective of this paper is to investigate the large deflection of a slender functionally graded beam under the transverse loading. Firstly, by modeling the functionally graded beam as a layered structure with graded yield strength, a unified yield criterion for a functionally graded metallic beam is established. Based on the proposed yielding criteria, analytical solutions (AS) for the large deflections of fully clamped functionally graded beams subjected to transverse loading are formulated. Comparisons between the present solutions with numerical results are made and good agreements are found. The effects of gradient profile and gradient intensity factor on the large deflections of functionally graded beams are discussed in detail. The reliability of the present analytical model is demonstrated, and the larger the gradient variation ratio near the loading surface is, the more accurate the layer-graded beam model will be.

Love Wave in an Isotropic Half-Space with a Graded Layer

2013 ◽  
Vol 325-326 ◽  
pp. 252-255
Author(s):  
Li Gang Zhang ◽  
Hong Zhu ◽  
Hong Biao Xie ◽  
Jian Wang
Keyword(s):  
Shear Modulus ◽  
Half Space ◽  
Analytical Solutions ◽  
Love Wave ◽  
Elastic Half Space ◽  
Functionally Graded ◽  
Thickness Direction ◽  
Vibration Model ◽  
General Dispersion ◽  
Functionally Graded Layer

This work addresses the dispersion of Love wave in an isotropic homogeneous elastic half-space covered with a functionally graded layer. First, the general dispersion equations are given. Then, the approximation analytical solutions of displacement, stress and the general dispersion relations of Love wave in both media are derived by the WKBJ approximation method. The solutions are checked against numerical calculations taking an example of functionally graded layer with exponentially varying shear modulus and density along the thickness direction. The dispersion curves obtained show that a cut-off frequency arises in the lowest order vibration model.

scholarly journals Three-Dimensional Buckling Analysis of Functionally Graded Saturated Porous Rectangular Plates under Combined Loading Conditions

2021 ◽  
Vol 11 (21) ◽  
pp. 10434
Author(s):  
Faraz Kiarasi ◽  
Masoud Babaei ◽  
Kamran Asemi ◽  
Rossana Dimitri ◽  
Francesco Tornabene
Keyword(s):  
Three Dimensional ◽  
Functionally Graded ◽  
Constitutive Law ◽  
Combined Loading ◽  
Rectangular Plates ◽  
Loading Conditions ◽  
Classical Elasticity ◽  
Novel Approach ◽  
Buckling Behavior ◽  
Generalized Differential

The present work studies the buckling behavior of functionally graded (FG) porous rectangular plates subjected to different loading conditions. Three different porosity distributions are assumed throughout the thickness, namely, a nonlinear symmetric, a nonlinear asymmetric and a uniform distribution. A novel approach is proposed here based on a combination of the generalized differential quadrature (GDQ) method and finite elements (FEs), labeled here as the FE-GDQ method, while assuming a Biot’s constitutive law in lieu of the classical elasticity relations. A parametric study is performed systematically to study the sensitivity of the buckling response of porous structures, to different input parameters, such as the aspect ratio, porosity and Skempton coefficients, along with different boundary conditions (BCs) and porosity distributions, with promising and useful conclusions for design purposes of many engineering structural porous members.

Finite element analysis of flexible functionally graded beams with variable Poisson’s ratio

2016 ◽  
Vol 33 (8) ◽  
pp. 2421-2447 ◽  
Author(s):  
João Paulo Pascon
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Poisson’S Ratio ◽  
Scientific Literature ◽  
Functionally Graded ◽  
Poisson's Ratio ◽  
Transverse Strain ◽  
Thickness Direction ◽  
Element Analysis ◽  
Content Type

Purpose The purpose of this paper is to deal with large deformation analysis of plane beams composed of functionally graded (FG) elastic material with a variable Poisson’s ratio. Design/methodology/approach The material is assumed to be linear elastic, with a Poisson’s ratio varying according to a power law along the thickness direction. The finite element used is a plane beam of any-order of approximation along the axis, and with four transverse enrichment schemes, which can describe constant, linear, quadratic and cubic variation of the strain along the thickness direction. Regarding the constitutive law, five materials are adopted: two homogeneous limiting cases, and three intermediate FG cases. The effect of both finite element kinematics and distribution of Poisson’s ratio on the mechanical response of a cantilever is investigated. Findings In accordance with the scientific literature, the second scheme, in which the transverse strain is linearly variable, is sufficient for homogeneous long (or thin) beams under bending. However, for FG short (or moderate thick) beams, the third scheme, in which the transverse strain variation is quadratic, is needed for a reliable strain or stress distribution. Originality/value In the scientific literature, there are several studies regarding nonlinear analysis of functionally graded materials (FGMs) via finite elements, analysis of FGMs with constant Poisson’s ratio, and geometrically linear problems with gradually variable Poisson’s ratio. However, very few deal with finite element analysis of flexible beams with gradually variable Poisson’s ratio. In the present study, a reliable formulation for such beams is presented.

Sign in / Sign up

Export Citation Format

Share Document