Adsorption-induced Instantaneous Deformation in Double Porosity Media: Modeling and Experimental Validations

Author(s):  
Laurent Perrier ◽  
Frédéric Plantier ◽  
Gilles Pijaudier-Cabot ◽  
David Grégoire
2018 ◽  
Author(s):  
Pierre Marcasuzaa ◽  
Samuel Pearson ◽  
Karell Bosson ◽  
Laurence Pessoni ◽  
Jean-Charles Dupin ◽  
...  

A hierarchically structured platform was obtained from spontaneous self-assembly of a poly(styrene)-<i>b</i>-poly(vinylbenzylchloride) (PS-<i>b</i>-PVBC) block copolymer (BCP) during breath figure (BF) templating. The BF process using a water/ethanol atmosphere gave a unique double porosity in which hexagonally arranged micron-sized pores were encircled by a secondary population of smaller, nano-sized pores. A third level of structuration was simultaneously introduced between the pores by directed BCP self-assembly to form out-of-the-plane nano-cylinders, offering very rapid bottom-up access to a film with unprecedented triple structure which could be used as a reactive platform for introducing further surface functionality. The surface nano-domains of VBC were exploited as reactive nano-patterns for site-specific chemical functionalization by firstly substituting the exposed chlorine moiety with azide, then “clicking” an alkyne by copper (I) catalyzed azide-alkyne Huisgen cycloaddition (CuAAC). Successful chemical modification was verified by NMR spectroscopy, FTIR spectroscopy, and XPS, with retention of the micro- and nanostructuration confirmed by SEM and AFM respectively. Protonation of the cyclotriazole surface groups triggered a switch in macroscopic behavior from a Cassie-Baxter state to a Wenzel state, highlighting the possibility of producing responsive surfaces with hierarchical structure.


2020 ◽  
Vol 15 ◽  
Author(s):  
Deeksha Saxena ◽  
Mohammed Haris Siddiqui ◽  
Rajnish Kumar

Background: Deep learning (DL) is an Artificial neural network-driven framework with multiple levels of representation for which non-linear modules combined in such a way that the levels of representation can be enhanced from lower to a much abstract level. Though DL is used widely in almost every field, it has largely brought a breakthrough in biological sciences as it is used in disease diagnosis and clinical trials. DL can be clubbed with machine learning, but at times both are used individually as well. DL seems to be a better platform than machine learning as the former does not require an intermediate feature extraction and works well with larger datasets. DL is one of the most discussed fields among the scientists and researchers these days for diagnosing and solving various biological problems. However, deep learning models need some improvisation and experimental validations to be more productive. Objective: To review the available DL models and datasets that are used in disease diagnosis. Methods: Available DL models and their applications in disease diagnosis were reviewed discussed and tabulated. Types of datasets and some of the popular disease related data sources for DL were highlighted. Results: We have analyzed the frequently used DL methods, data types and discussed some of the recent deep learning models used for solving different biological problems. Conclusion: The review presents useful insights about DL methods, data types, selection of DL models for the disease diagnosis.


2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Rafat Damseh ◽  
Yuankang Lu ◽  
Xuecong Lu ◽  
Cong Zhang ◽  
Paul J. Marchand ◽  
...  

AbstractRecent studies suggested that cerebrovascular micro-occlusions, i.e. microstokes, could lead to ischemic tissue infarctions and cognitive deficits. Due to their small size, identifying measurable biomarkers of these microvascular lesions remains a major challenge. This work aims to simulate potential MRI signatures combining arterial spin labeling (ASL) and multi-directional diffusion-weighted imaging (DWI). Driving our hypothesis are recent observations demonstrating a radial reorientation of microvasculature around the micro-infarction locus during recovery in mice. Synthetic capillary beds, randomly- and radially-oriented, and optical coherence tomography (OCT) angiograms, acquired in the barrel cortex of mice (n = 5) before and after inducing targeted photothrombosis, were analyzed. Computational vascular graphs combined with a 3D Monte-Carlo simulator were used to characterize the magnetic resonance (MR) response, encompassing the effects of magnetic field perturbations caused by deoxyhemoglobin, and the advection and diffusion of the nuclear spins. We quantified the minimal intravoxel signal loss ratio when applying multiple gradient directions, at varying sequence parameters with and without ASL. With ASL, our results demonstrate a significant difference (p < 0.05) between the signal-ratios computed at baseline and 3 weeks after photothrombosis. The statistical power further increased (p < 0.005) using angiograms measured at week 4. Without ASL, no reliable signal change was found. We found that higher ratios, and accordingly improved significance, were achieved at lower magnetic field strengths (e.g., B0 = 3T) and shorter echo time TE (< 16 ms). Our simulations suggest that microstrokes might be characterized through ASL-DWI sequence, providing necessary insights for posterior experimental validations, and ultimately, future translational trials.


2021 ◽  
Vol 61 ◽  
pp. 103323
Author(s):  
B. Amaziane ◽  
M. Jurak ◽  
L. Pankratov ◽  
A. Piatnitski

Author(s):  
Ping He ◽  
Yangmao Wen ◽  
Shuiping Li ◽  
Kaihua Ding ◽  
Zhicai Li ◽  
...  

Summary As the largest and most active intracontinental orogenic belt on Earth, the Tien Shan (TS) is a natural laboratory for understanding the Cenozoic orogenic processes driven by the India-Asia collision. On 19 January 2020, a Mw 6.1 event stuck the Kalpin region, where the southern frontal TS interacts with the Tarim basin. To probe the local ongoing orogenic processes and potential seismic hazard in the Kalpin region, both interseismic and instantaneous deformation derived from geodetic observations are employed in this study. With the constraint of interseismic global navigation satellite system (GNSS) velocities, we estimate the décollement plane parameters of the western Kalpin nappe based on a two-dimensional dislocation model, and the results suggest that the décollement plane is nearly subhorizontal with a dip of ∼3° at a depth of 24 km. Then, we collect both Sentinel-1 and ALOS-2 satellite images to capture the coseismic displacements caused by the 2020 Kalpin event, and the interferometric synthetic aperture radar (InSAR) images show a maximum displacement of 7 cm in the line of sight near the epicentral region. With these coseismic displacement measurements, we invert the source parameters of this event using a finite-fault model. We determine the optimal source mechanism in which the fault geometry is dominated by thrust faulting with an E–W strike of 275° and a northward dip of 11.2°, and the main rupture slip is concentrated within an area 28.0 km in length and${\rm{\,\,}}$10.3 km in width, with a maximum slip of 0.3 m at a depth of 6–8 km. The total released moment of our preferred distributed slip model yields a geodetic moment of 1.59 × 1018 N$\cdot $m, equivalent to Mw 6.1. The contrast of the décollement plane depth from interseismic GNSS and the rupture depth from coseismic InSAR suggests that a compression still exists in the Kalpin nappe forefront, which is prone to frequent moderate events and may be at risk of a much more dangerous earthquake.


2021 ◽  
Vol 13 (6) ◽  
pp. 3219
Author(s):  
Hynek Lahuta ◽  
Luis Andrade Pais

This contribution presents results from a series of compression and undrained triaxial tests to study the mechanical behavior of dump clay from the north of Bohemia. The use of these materials as a foundation for construction can’t be achieved without the adoption of some precautions. This comes from embankment, formed by digging the ground (altered claystone), up to the level of coal mining which is in a sub horizontal stratigraphic layer. A potential static liquefaction behavior was observed in undrained tests for high confinement stress. A structural collapse was noticed with the results obtained in the triaxial test. This collapse is characterized by an unexpected large decrease in deviator and mean effective stress. The soils formed have strength properties that are potentially dangerous. These concepts can improve the use of these kinds of soils in geotechnical engineering work. It continues and expands the results obtained in previous research, especially the future problematic use of these materials as the foundation soil for line or building structures.


Sign in / Sign up

Export Citation Format

Share Document