instantaneous deformation
Recently Published Documents


TOTAL DOCUMENTS

26
(FIVE YEARS 7)

H-INDEX

6
(FIVE YEARS 0)

2022 ◽  
Vol 906 ◽  
pp. 69-76
Author(s):  
Tigran Petrosyan

In order to study the effect of temperature changes on the dissipative properties of materials, two approaches are used. The first approach implies introducing some temperature function under the sign of the integral in the heredity theory equation and simultaneously taking into account the dependence of the elastic modulus on temperature. As a result, based on experimental data on the thermal creep of soils, the expression for determining the hysteresis energy losses under the periodic voltage changes was obtained depending on temperature changes.According to the second approach, the expression for determining the hysteresis energy losses under isothermal conditions at different temperatures was obtained by introducing into the heredity theory equation an approximation of the experimental dependences of instantaneous deformation and temperature creep parameters for steel Kh18 N10T.


2021 ◽  
Vol 6 (7) ◽  
pp. 42-47
Author(s):  
Leyva L. Orión ◽  
Rosel P. Graciela ◽  
Gámez-C. Hugo

The welding current (A), arc voltage (V) preheating (°C), travel speed (mm·min-1) and net heat input (Qnet) were evaluated, on the strength and morphology of the fracture in experimental HSLA Cr-Ni steel welded joints, with commercial (ERS70S-6) filler metal and robotic GTAW technique. The samples were characterized by uniaxial stress tests, stereoscopy and Digital Image Processing (DIP). The results showed that the resistance to fracture of the experimental steel was exceeded by 18.39% by applying Qnet 0.520 (kJ·mm-1) and the combination of: 200 A, 12.7 V, 25 °C and 180 mm min-1, which influenced the ductile fracture morphology and topology. While the low Qnet (0.200-0.208 kJ·mm-1) favors instantaneous deformation of the welded joints with fracture in the weld bead as the major defect.


2021 ◽  
Vol 2021 ◽  
pp. 1-10
Author(s):  
Jinsong Zhang ◽  
Yaxing Wang ◽  
Junjun Liu ◽  
Jiuqun Zou

In order to explore the creep characteristics of thermal insulation shotcrete under the action of temperature and humidity circulation, a series of uniaxial compression creep tests were carried out with different cycles of temperature and humidity and hierarchical loading conditions. The test results show that the axial creep deformation and creep strain of the thermal insulation shotcrete specimens increase with the increase of the number of drying and wetting cycles under normal temperature water bath condition. After 28 cycles, the deformation value becomes larger obviously, and the creep strain increases greatly in the precycle period. The thermal insulation shotcrete axial steady-state creep rate increases nonlinearly with the increase of the number of drying and wetting cycles under different stress levels. When the number of adjacent cycles is 0–3, the average increase is larger, and the axial steady-state creep rate of thermal insulation shotcrete for 28 cycles increases with the increase of water bath temperature. The instantaneous deformation modulus of thermal insulation shotcrete decreases logarithmically with the increase of the number of drying and wetting cycles, and the total deterioration degree of the average instantaneous deformation modulus increases gradually, but the deterioration degree between adjacent cycles decreases successively. The thermal insulation shotcrete specimens with 3 cycles of fracture were mainly stretched, and with the increase of the water bath temperature, the specimen was damaged by shear failure. When the water bath temperature is 40°C, the fracture degree of the specimen increases first and then decreases with the increase of the number of cycles.


Author(s):  
Xiaokang Pan ◽  
Filippo Berto ◽  
Xiaoping Zhou

This work discusses the results from tests conducted to investigate the uniaxial compression and creep behavior of red sandstone. The original untreated sample and the 800 ℃ treated sample have been selected to carry out the experiments. It has been found that high temperature has obvious influence on the mechanical properties of red sandstone. The relationship between creep strain and instantaneous strain, as well as instantaneous deformation modulus and creep viscosity coefficient have been analyzed. It has been found that high temperature reduces the ability of red sandstone to resist instantaneous deformation and creep deformation. Acoustic emission (AE) technology has been also used in the loading process of uniaxial compression and creep tests, providing a powerful means for damage evolution analysis of red sandstone.


Author(s):  
Ping He ◽  
Yangmao Wen ◽  
Shuiping Li ◽  
Kaihua Ding ◽  
Zhicai Li ◽  
...  

Summary As the largest and most active intracontinental orogenic belt on Earth, the Tien Shan (TS) is a natural laboratory for understanding the Cenozoic orogenic processes driven by the India-Asia collision. On 19 January 2020, a Mw 6.1 event stuck the Kalpin region, where the southern frontal TS interacts with the Tarim basin. To probe the local ongoing orogenic processes and potential seismic hazard in the Kalpin region, both interseismic and instantaneous deformation derived from geodetic observations are employed in this study. With the constraint of interseismic global navigation satellite system (GNSS) velocities, we estimate the décollement plane parameters of the western Kalpin nappe based on a two-dimensional dislocation model, and the results suggest that the décollement plane is nearly subhorizontal with a dip of ∼3° at a depth of 24 km. Then, we collect both Sentinel-1 and ALOS-2 satellite images to capture the coseismic displacements caused by the 2020 Kalpin event, and the interferometric synthetic aperture radar (InSAR) images show a maximum displacement of 7 cm in the line of sight near the epicentral region. With these coseismic displacement measurements, we invert the source parameters of this event using a finite-fault model. We determine the optimal source mechanism in which the fault geometry is dominated by thrust faulting with an E–W strike of 275° and a northward dip of 11.2°, and the main rupture slip is concentrated within an area 28.0 km in length and${\rm{\,\,}}$10.3 km in width, with a maximum slip of 0.3 m at a depth of 6–8 km. The total released moment of our preferred distributed slip model yields a geodetic moment of 1.59 × 1018 N$\cdot $m, equivalent to Mw 6.1. The contrast of the décollement plane depth from interseismic GNSS and the rupture depth from coseismic InSAR suggests that a compression still exists in the Kalpin nappe forefront, which is prone to frequent moderate events and may be at risk of a much more dangerous earthquake.


2020 ◽  
Vol 405 ◽  
pp. 212-216
Author(s):  
Jozef Miškuf ◽  
Kornel Csach ◽  
Alena Juríková ◽  
Mária Demčáková ◽  
Mária Demčáková ◽  
...  

Depending on the composition and structure of metallic glasses cells with the dimensions in the range from tenths nanometers to tenths micrometers were observed on the ductile fracture surface. The variation in dimple size was compared with the serrations presented on the loading curve at the nanoindentation of the metallic glasses with different compositions. Higher instantaneous deformation can be connected with simultaneous shearing at more suitable shear band configurations. The cell morphology with the various cell sizes is observed at the failure of the metallic glasses. At the failure of high strength metallic glasses, the cells are formed in short time due to the release of high amount of stored elastic energy. In this case the uniform cell morphology with the cell size of about 20 nm is observed.


2017 ◽  
Vol 4 (10) ◽  
pp. 171152 ◽  
Author(s):  
Yonatan Meresman ◽  
Gal Ribak

Intraspecific variation in adult body mass can be particularly high in some insect species, mandating adjustment of the wing's structural properties to support the weight of the larger body mass in air. Insect wings elastically deform during flapping, dynamically changing the twist and camber of the relatively thin and flat aerofoil. We examined how wing deformations during free flight scale with body mass within a species of rose chafers (Coleoptera: Protaetia cuprea ) in which individuals varied more than threefold in body mass (0.38–1.29 g). Beetles taking off voluntarily were filmed using three high-speed cameras and the instantaneous deformation of their wings during the flapping cycle was analysed. Flapping frequency decreased in larger beetles but, otherwise, flapping kinematics remained similar in both small and large beetles. Deflection of the wing chord-wise varied along the span, with average deflections at the proximal trailing edge higher by 0.2 and 0.197 wing lengths compared to the distal trailing edge in the downstroke and the upstroke, respectively. These deflections scaled with wing chord to the power of 1.0, implying a constant twist and camber despite the variations in wing and body size. This suggests that the allometric growth in wing size includes adjustment of the flexural stiffness of the wing structure to preserve wing twist and camber during flapping.


2017 ◽  
Vol 2017.66 (0) ◽  
pp. 106
Author(s):  
Hiroaki MIURA ◽  
Takuya KAWAMURA ◽  
Katsutoshi OTSUBO ◽  
Hironao YAMADA

Sign in / Sign up

Export Citation Format

Share Document