Assessment and analysis of binary hybrid nanofluid impact on new configurations for curved-corrugated channel

Постановка задачи. Рассматривается теплообменный процесс, протекающий в модифицированном гофрированном межпластинном канале интенсифицированного пластинчатого теплообменного аппарата с повышенной турбулизацией теплоносителя. Необходимо разработать компьютерную модель движения теплоносителя в диапазоне скоростей 0,1-1,5 м/с и определить коэффициент турбулизации пластинчатого теплообменника. Результаты. Приведены результаты компьютерного моделирования движения теплоносителя в межпластинном гофрированном канале оригинального пластинчатого теплообменного аппарата с помощью программного комплекса Аnsys . Определены критерии устойчивости системы. Выполнено 3 D -моделирование канала, образуемого гофрированными пластинами. При исследовании процесса турбулизации были рассмотрены несколько скоростных режимов движения теплоносителя. Определен коэффициент турбулизации Tu, %. Выводы. В результате компьютерного моделирования установлено увеличение коэффициента теплопередачи К, Вт/(м ℃ ) за счет повышенной турбулизации потока, что приводит к снижению металлоемкости и уменьшению стоимости теплообменного оборудования. Statement of the problem. The heat exchange process occurring in a modified corrugated interplate channel of an intensified plate heat exchanger with an increased turbulence of the heat carrier is discussed. A computer model of the coolant movement in the speed range of 0.1-1.5 m/s is developed and the turbulence coefficient of the plate heat exchanger is determined. Results. The article presents the results of computer modeling of the coolant movement in the interplate corrugated channel of the original plate heat exchanger using the Ansys software package. The criteria of system stability are defined. 3D modeling of the channel formed by corrugated plates is performed. In the study of the process of turbulence several high-speed modes of movement of the coolant were considered. The turbulence coefficient Tu, % is determined. Conclusions. As a result of computer simulation, an increase in the heat transfer coefficient K, W/(m ℃) was found due to an increased turbulization of the flow, which leads to a decrease in metal consumption and a decrease in the cost of heat exchange equipment.

Download Full-text

Experimental Study on the Specific Heat Capacity Measurement of Water-Based Al2O3-Cu Hybrid Nanofluid by using Differential Thermal Analysis Method

Current Nanoscience ◽

10.2174/1573413715666191118105331 ◽

2019 ◽

Vol 15 ◽

Author(s):

Andaç Batur Çolak ◽

Oğuzhan Yıldız ◽

Mustafa Bayrak ◽

Ali Celen ◽

Ahmet Selim Dalkılıç ◽

...

Keyword(s):

Heat Capacity ◽

Specific Heat ◽

Specific Heat Capacity ◽

Thermophysical Properties ◽

Volume Concentration ◽

Pure Water ◽

Heat Capacity Measurement ◽

Experimental Results ◽

Hybrid Nanofluid ◽

Capacity Measurement

Background: Researchers working in the field of nanofluid have done many studies on the thermophysical properties of nanofluids. Among these studies, the number of studies on specific heat are rather limited. In the study of the heat transfer performance of nanofluids, it is necessary to increase the number of specific heat studies, whose subject is one of the important thermophysical properties. Objective: The authors aimed to measure the specific heat values of Al2O3/water, Cu/water nanofluids and Al2O3-Cu/water hybrid nanofluids using the DTA method, and compare the results with those frequently used in the literature. In addition, this study focuses on the effect of temperature and volume concentration on specific heat. Method: The two-step method was used in the preparation of nanofluids. The pure water selected as the base fluid was mixed with the Al2O3 and Cu nanoparticles and Arabic Gum as the surfactant, firstly mixed in the magnetic stirrer for half an hour. It was then homogenized for 6 hours in the ultrasonic homogenizer. Results: After the experiments, the specific heat of nanofluids and hybrid nanofluid were compared and the temperature and volume concentration of specific heat were investigated. Then, the experimental results obtained for all three fluids were compared with the two frequently used correlations in the literature. Conclusion: Specific heat capacity increased with increasing temperature, and decreased with increasing volume concentration for three tested nanofluids. Cu/water has the lowest specific heat capacity among all tested fluids. Experimental specific heat capacity measurement results are compared by using the models developed by Pak and Cho and Xuan and Roetzel. According to experimental results, these correlations can predict experimental results within the range of ±1%.

Download Full-text

A significant role of permeability on blood flow for hybrid nanofluid through bifurcated stenosed artery: Drug delivery application

Computer Methods and Programs in Biomedicine ◽

10.1016/j.cmpb.2019.105248 ◽

2020 ◽

Vol 187 ◽

pp. 105248 ◽

Cited By ~ 4

Author(s):

Iqra Shahzadi ◽

S. Bilal

Keyword(s):

Drug Delivery ◽

Blood Flow ◽

Significant Role ◽

Hybrid Nanofluid ◽

Drug Delivery Application ◽

Stenosed Artery

Download Full-text

Nanoscale energy transport of inclined magnetized 3D hybrid nanofluid with Lobatto IIIA scheme

Heat Transfer ◽

10.1002/htj.22188 ◽

2021 ◽

Author(s):

Assad Ayub ◽

Adil Darvesh ◽

Gilder C. Altamirano ◽

Zulqurnain Sabir

Keyword(s):

Energy Transport ◽

Hybrid Nanofluid

Download Full-text

Approximate Analytical Analysis of Unsteady MHD Mixed Flow of Non-Newtonian Hybrid Nanofluid over a Stretching Surface

Fluids ◽

10.3390/fluids6040138 ◽

2021 ◽

Vol 6 (4) ◽

pp. 138

Author(s):

Ali Rehman ◽

Zabidin Salleh

Keyword(s):

Heat Transfer ◽

Differential Equations ◽

Base Fluid ◽

Research Work ◽

Hybrid Nanofluid ◽

Stretching Surface ◽

Optimal Homotopy Analysis Method ◽

Analytical Analysis ◽

Transfer Ratio ◽

The Impact

This paper analyses the two-dimensional unsteady and incompressible flow of a non-Newtonian hybrid nanofluid over a stretching surface. The nanofluid formulated in the present study is TiO2 + Ag + blood, and TiO2 + blood, where in this combination TiO2 + blood is the base fluid and TiO2 + Ag + blood represents the hybrid nanofluid. The aim of the present research work is to improve the heat transfer ratio because the heat transfer ratio of the hybrid nanofluid is higher than that of the base fluid. The novelty of the recent work is the approximate analytical analysis of the magnetohydrodynamics mixed non-Newtonian hybrid nanofluid over a stretching surface. This type of combination, where TiO2+blood is the base fluid and TiO2 + Ag + blood is the hybrid nanofluid, is studied for the first time in the literature. The fundamental partial differential equations are transformed to a set of nonlinear ordinary differential equations with the guide of some appropriate similarity transformations. The analytical approximate method, namely the optimal homotopy analysis method (OHAM), is used for the approximate analytical solution. The convergence of the OHAM for particular problems is also discussed. The impact of the magnetic parameter, dynamic viscosity parameter, stretching surface parameter and Prandtl number is interpreted through graphs. The skin friction coefficient and Nusselt number are explained in table form. The present work is found to be in very good agreement with those published earlier.

Download Full-text