Developing the structural analysis considering fuzzy performance levels

Abstract The Gas Turbine (GT) Axial Compressor (AXCO) can absorb up to the 30% of the power produced by the GT, being the component with the largest impact over the performances. The axial compressor blades might undergo the fouling phenomena as a consequence of the unwanted material locally accumulating during the machine operations. The presence of such polluting substances reduces the aerodynamic efficiency as well as the air intake causing the drop of performances and the increase of the fuel consumption. To address the above-mentioned critical issues, several washing strategies have been implemented so far, among the most promising ones, High Flow On-Line Water Washing (HFOLWW) is worth to mention. Exploiting this technique, the performance levels are preserved, whereas the stops for maintenance should be reduced. Nevertheless, this comes at the cost of a long-term erosion exposure caused by the impact of water washing droplets. Hence, it was deemed necessary to carry out a finite element method (FEM) structural analysis of the first rotor stage of the compressor of an aeroderivative GT, integrated into the HFOLWW scheme, in order to evaluate the fatigue strength of the component subjected to the erosion; possibly along with its acceptability limits. The first step requires the determination of the blade areas affected by erosion, using computational fluid dynamics (CFD) simulations, followed by the creation and the 3D modelling of the damaged geometry. The final step consists in the evaluation of the static stress and the dynamic agents, to perform a fatigue analysis through the Goodman relation and carrying out a simulation of damage propagation exploiting the theory of fracture mechanics. This procedure has been extended to the damage-free baseline component to set-up a model suitable for comparison. The structural analysis confirms the design of the blade, moreover dynamic and static evaluation of the eroded profiles haven’t outlined any working, nor mechanical, issue. This entitles the structural choice of HFOLWW as a system which guarantees full performance levels of the compressor.

Download Full-text

Structural analysis of the surface-layer protein of spirillum serpens by high-resolution electron microscopy

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100077268 ◽

1983 ◽

Vol 41 ◽

pp. 738-739

Author(s):

W. H. Wu ◽

R. M. Glaeser

Keyword(s):

Electron Microscopy ◽

Surface Layer ◽

Structural Analysis ◽

High Resolution ◽

Low Dose ◽

High Resolution Electron Microscopy ◽

Optical Diffraction ◽

Surface Layer Protein ◽

Morphological Unit ◽

Resolution Electron

Spirillum serpens possesses a surface layer protein which exhibits a regular hexagonal packing of the morphological subunits. A morphological model of the structure of the protein has been proposed at a resolution of about 25 Å, in which the morphological unit might be described as having the appearance of a flared-out, hollow cylinder with six ÅspokesÅ at the flared end. In order to understand the detailed association of the macromolecules, it is necessary to do a high resolution structural analysis. Large, single layered arrays of the surface layer protein have been obtained for this purpose by means of extensive heating in high CaCl2, a procedure derived from that of Buckmire and Murray. Low dose, low temperature electron microscopy has been applied to the large arrays.As a first step, the samples were negatively stained with neutralized phosphotungstic acid, and the specimens were imaged at 40,000 magnification by use of a high resolution cold stage on a JE0L 100B. Low dose images were recorded with exposures of 7-9 electrons/Å2. The micrographs obtained (Fig. 1) were examined by use of optical diffraction (Fig. 2) to tell what areas were especially well ordered.

Download Full-text

RNA polymerase: Preparation and structural analysis of helical polymers

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s042482010011091x ◽

1984 ◽

Vol 42 ◽

pp. 152-153

Author(s):

E. Loren Buhle ◽

Pamela Rew ◽

Ueli Aebi

Keyword(s):

Structural Analysis ◽

Rna Polymerase ◽

Molecular Level ◽

X Ray Diffraction ◽

Helical Polymers ◽

X Ray ◽

E Coli ◽

The Past ◽

Ordered Arrays ◽

Low Ionic Strength

While DNA-dependent RNA polymerase represents one of the key enzymes involved in transcription and ultimately in gene expression in procaryotic and eucaryotic cells, little progress has been made towards elucidation of its 3-D structure at the molecular level over the past few years. This is mainly because to date no 3-D crystals suitable for X-ray diffraction analysis have been obtained with this rather large (MW ~500 kd) multi-subunit (α2ββ'ζ). As an alternative, we have been trying to form ordered arrays of RNA polymerase from E. coli suitable for structural analysis in the electron microscope combined with image processing. Here we report about helical polymers induced from holoenzyme (α2ββ'ζ) at low ionic strength with 5-7 mM MnCl2 (see Fig. 1a). The presence of the ζ-subunit (MW 86 kd) is required to form these polymers, since the core enzyme (α2ββ') does fail to assemble into such structures under these conditions.

Download Full-text

Interpreting HVEM of muscle-cell impulse networks

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s042482010012103x ◽

1992 ◽

Vol 50 (1) ◽

pp. 126-127

Author(s):

Paul DeCosta ◽

Kyugon Cho ◽

Stephen Shemlon ◽

Heesung Jun ◽

Stanley M. Dunn

Keyword(s):

Structural Analysis ◽

Muscle Cell ◽

Electron Micrographs ◽

Relative Size ◽

Automatic Classification ◽

Nerve Fibers ◽

Analysis Algorithm ◽

Structural Networks

Introduction: The analysis and interpretation of electron micrographs of cells and tissues, often requires the accurate extraction of structural networks, which either provide immediate 2D or 3D information, or from which the desired information can be inferred. The images of these structures contain lines and/or curves whose orientation, lengths, and intersections characterize the overall network.Some examples exist of studies that have been done in the analysis of networks of natural structures. In, Sebok and Roemer determine the complexity of nerve structures in an EM formed slide. Here the number of nodes that exist in the image describes how dense nerve fibers are in a particular region of the skin. Hildith proposes a network structural analysis algorithm for the automatic classification of chromosome spreads (type, relative size and orientation).

Download Full-text