Biodiesel production by combined fatty acids separation and subsequently enzymatic esterification to improve the low temperature properties

2014 ◽  
Vol 174 ◽  
pp. 302-305 ◽  
Author(s):  
Meng Wang ◽  
Kaili Nie ◽  
Hao Cao ◽  
Li Deng ◽  
Fang Wang ◽  
...  
Author(s):  
Аntonina A. Stepacheva ◽  
Valentin N. Sapunov ◽  
Esther M. Sulman M. Sulman ◽  
Linda Zh. Nikoshvili ◽  
Mikhail G. Sulman ◽  
...  

<p>This paper is devoted to the production of second generation biodiesel via catalytic hydrodeoxygenation of fatty acids. Pd/C catalysts with different metal loading were used. The palladium catalysts were characterized using low-temperature nitrogen physisorption and X-ray photoelectron spectroscopy. It was revealed that the most active and selective catalyst was 1%-Pd/C which allowed reaching up 97.5% of selectivity (regarding to n-heptadecane) at 100% conversion of substrate. Moreover, the chosen catalyst is more preferable according to lower metal content that leads the decrease of the process cost. The analysis of the catalysts showed that 1%-Pd/C had the highest specific surface area compared with 5%-Pd/C. Copyright © 2016 BCREC GROUP. All rights reserved</p><p><em>Received: 31<sup>st</sup> July 2015; Revised: 9<sup>th</sup> December 2015; Accepted: 30<sup>th</sup> December 2015</em></p><p><strong>How to Cite</strong>: Stepacheva, A.A., Sapunov, V.N., Sulman, E.M., Nikoshvili, L.Z., Sulman, M.G., Sidorov, A.I., Demidenko, G.N., Matveeva, V.G. (2016). Catalytic Hydrodeoxygenation of Fatty Acids for Biodiesel Production. <em>Bulletin of Chemical Reaction Engineering &amp; Catalysis</em>, 11 (2): 125-132 (doi:10.9767/bcrec.11.2.538.125-132)</p><p><strong>Permalink/DOI</strong>: http://dx.doi.org/10.9767/bcrec.11.2.538.125-132</p>


Energies ◽  
2021 ◽  
Vol 14 (21) ◽  
pp. 7148
Author(s):  
Ayesha Mushtaq ◽  
Muhammad Asif Hanif ◽  
Muhammad Zahid ◽  
Umer Rashid ◽  
Zahid Mushtaq ◽  
...  

Biodiesel has attracted considerable interest as an alternative biofuel due to its many advantages over conventional petroleum diesel such as inherent lubricity, low toxicity, renewable raw materials, biodegradability, superior flash point, and low carbon footprint. However, high production costs, poor low temperature operability, variability of fuel quality from different feedstocks, and low storage stability negatively impact more widespread adoption. In order to reduce production costs, inexpensive inedible oilseed alternatives are needed for biodiesel production. This study utilized inedible tamarind (Tamarind indica) seed oil as an alternative biodiesel feedstock, which contained linoleic (31.8%), oleic (17.1%), and lauric (12.0%) acids as the primary fatty acids. A simple and cost-effective high vacuum fractional distillation (HVFD) methodology was used to separate the oil into three fractions (F1, F2, and F3). Subsequent transesterification utilizing basic, acidic, and enzymatic catalysis produced biodiesel of consistent quality and overcame the problem of low temperature biodiesel performance. The most desirable biodiesel with regard to low temperature operability was produced from fractions F2 and F3, which were enriched in unsaturated fatty acids relative to tamarind seed oil. Other properties such as density and cetane number were within the limits specified in the American and European biodiesel standards.


2021 ◽  
Vol 22 (4) ◽  
pp. 1554
Author(s):  
Tawhidur Rahman ◽  
Mingxuan Shao ◽  
Shankar Pahari ◽  
Prakash Venglat ◽  
Raju Soolanayakanahally ◽  
...  

Cuticular waxes are a mixture of hydrophobic very-long-chain fatty acids and their derivatives accumulated in the plant cuticle. Most studies define the role of cuticular wax largely based on reducing nonstomatal water loss. The present study investigated the role of cuticular wax in reducing both low-temperature and dehydration stress in plants using Arabidopsis thaliana mutants and transgenic genotypes altered in the formation of cuticular wax. cer3-6, a known Arabidopsis wax-deficient mutant (with distinct reduction in aldehydes, n-alkanes, secondary n-alcohols, and ketones compared to wild type (WT)), was most sensitive to water loss, while dewax, a known wax overproducer (greater alkanes and ketones compared to WT), was more resistant to dehydration compared to WT. Furthermore, cold-acclimated cer3-6 froze at warmer temperatures, while cold-acclimated dewax displayed freezing exotherms at colder temperatures compared to WT. Gas Chromatography-Mass Spectroscopy (GC-MS) analysis identified a characteristic decrease in the accumulation of certain waxes (e.g., alkanes, alcohols) in Arabidopsis cuticles under cold acclimation, which was additionally reduced in cer3-6. Conversely, the dewax mutant showed a greater ability to accumulate waxes under cold acclimation. Fourier Transform Infrared Spectroscopy (FTIR) also supported observations in cuticular wax deposition under cold acclimation. Our data indicate cuticular alkane waxes along with alcohols and fatty acids can facilitate avoidance of both ice formation and leaf water loss under dehydration stress and are promising genetic targets of interest.


AIChE Journal ◽  
2007 ◽  
Vol 54 (1) ◽  
pp. 327-336 ◽  
Author(s):  
Chia-Hung Su ◽  
Chun-Chong Fu ◽  
James Gomes ◽  
I-Ming Chu ◽  
Wen-Teng Wu

2017 ◽  
Vol 47 (10) ◽  
pp. 970-976 ◽  
Author(s):  
Juan Daniel Rivaldi ◽  
Ana Karine F. Carvalho ◽  
Leyvison Rafael V. da Conceição ◽  
Heizir F. de Castro

Sign in / Sign up

Export Citation Format

Share Document