Comparison of contact angle measurement and microbial adhesion to solvents for assaying electron donor–electron acceptor (acid–base) properties of bacterial surface

2008 ◽  
Vol 65 (1) ◽  
pp. 134-139 ◽  
Author(s):  
Fatima Hamadi ◽  
Hassan Latrache
Keyword(s):  
Contact Angle ◽  
Electron Donor ◽  
Electron Acceptor ◽  
Contact Angle Measurement ◽  
Angle Measurement ◽  
Acid Base ◽  
Microbial Adhesion ◽  
Bacterial Surface ◽  
Base Properties

EFFECT OF Nd:YAG LASER MELTING ON SURFACE ENERGY OF AZ91D Mg ALLOY

2009 ◽  
Vol 16 (06) ◽  
pp. 801-806 ◽  
Author(s):  
Y. C. GUAN ◽  
W. ZHOU ◽  
H. Y. ZHENG
Keyword(s):  
Contact Angle ◽  
Surface Energy ◽  
Laser Irradiation ◽  
Contact Angle Measurement ◽  
Angle Measurement ◽  
Laser Surface ◽  
Laser Melting ◽  
Acid Base ◽  
Az91d Magnesium Alloy ◽  
Drastic Increase

Laser surface melting is known to alter surface energy and wettability of a few engineering materials, but its effect on magnesium alloys has never been reported. Effort was made to study how Nd : YAG laser irradiation influenced surface energy of an AZ91D magnesium alloy. Contact angle measurement was carried out using three types of liquids to make it possible to calculate the surface energy quantitatively based upon the acid–base theory. The laser irradiation was found to enhance surface wettability significantly and lead to a drastic increase in surface energy from 25.82 to 40.78 mJ/m2. The change in surface property was attributed to the laser-induced refinement of α- Mg and β- Mg 17 Al 12 phases and enrichment of Al in the microstructure.

scholarly journals Superhydrophobic functionalized cellulosic paper by copper hydroxide nanorods for oils purification

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Ahmed S. Belal ◽  
Jehan El Nady ◽  
Azza Shokry ◽  
Shaker Ebrahim ◽  
Moataz Soliman ◽  
...  
Keyword(s):  
Contact Angle ◽  
Filter Paper ◽  
Separation Efficiency ◽  
Contact Angle Measurement ◽  
Angle Measurement ◽  
Absorption Capacity ◽  
Morphological Properties ◽  
Copper Hydroxide ◽  
Immersion Method ◽  
Water Contact

AbstractOily water contamination has been sighted as one of the most global environmental pollution. Herein, copper hydroxide nanorods layer was constructed onto cellulosic filter paper surface cured with polydopamine, Ag nanoparticles, and Cu NPs through immersion method. This work has been aimed to produce a superhydrophobic and superoleophilic cellulosic filter paper. The structure, crystalline, and morphological properties of these modified cellulosic filter paper were investigated. Scanning electron microscope images confirmed that the modified surface was rougher compared with the pristine surface. The contact angle measurement confirmed the hydrophobic nature of these modified surfaces with a water contact angle of 169.7°. The absorption capacity was 8.2 g/g for diesel oil and the separation efficiency was higher than 99%. It was noted that the flux in the case of low viscosity solvent as n-hexane was 9663.5 Lm−2 h−1, while for the viscous oil as diesel was 1452.7 Lm−2 h−1.

Preparation and the Blood Compatibility of Titanium Oxide Nanorod Arrays

2011 ◽  
Vol 306-307 ◽  
pp. 25-30 ◽  
Author(s):  
Ping Luo ◽  
Zhan Yun Huang ◽  
Di Hu Chen
Keyword(s):  
Contact Angle ◽  
Surface Morphology ◽  
Titanium Oxide ◽  
Tin Oxide ◽  
Growth Parameters ◽  
Blood Compatibility ◽  
Contact Angle Measurement ◽  
Angle Measurement ◽  
Nanorod Arrays ◽  
Wetting Properties

In this work, titanium oxide nanorod arrays were fabricated by using the hydrothermal method on fluorine-doped tin oxide (FTO) coated glass. The diameter of the nanorods could be controlled from 150 nm to 30 nm by changing the growth parameters. The surface morphology and the structure of the samples were characterized by SEM and XRD. The wetting properties were identified by contact angle measurement. Platelet attachment was investigated to evaluate the blood compatibility of the samples with different nanoscale topographies. Results show that the nanotopographical surfaces perform outstanding blood compatibility, and the adhering platelet decreased with the increasing diameter of the nanorods.

Measurement of wheel-terrain contact angle for WMRs on rough terrain using laser scanning sensor

2017 ◽  
Vol 44 (6) ◽  
pp. 798-807 ◽  
Author(s):  
He Xu ◽  
Yan Xu ◽  
Peiyuan Wang ◽  
Hongpeng Yu ◽  
Ozoemena Anthony Ani ◽  
...  
Keyword(s):  
Contact Angle ◽  
Laser Scanning ◽  
Contact Angle Measurement ◽  
Angle Measurement ◽  
Rough Terrain ◽  
Wheeled Mobile Robots ◽  
Wheel Slip ◽  
Content Type ◽  
Terrain Model ◽  
Measurement Approach

Purpose The purpose of this paper is to explore a novel measurement approach for wheel-terrain contact angle using laser scanning sensors based on near-terrain perception. Laser scanning sensors have rarely been applied to the measurement of wheel-terrain contact angle for wheeled mobile robots (WMRs) in previous studies; however, it is an effective way to measure wheel-terrain contact angle directly with the advantages of simple, fast and high accuracy. Design/methodology/approach First, kinematics model for a WMR moving on rough terrain was developed, taking into consideration wheel slip and wheel-terrain contact angle. Second, the measurement principles of wheel-terrain contact angle using laser scanning sensors was presented, including “rigid wheel - rigid terrain” model and “rigid wheel - deformable terrain” model. Findings In the proposed approach, the measurement of wheel-terrain contact angle using laser scanning sensors was successfully demonstrated. The rationality of the approach was verified by experiments on rigid and sandy terrains with satisfactory results. Originality/value This paper proposes a novel, fast and effective wheel-terrain contact angle measurement approach for WMRs moving on both rigid and deformable terrains, using laser scanning sensors.

Contact Angle of Nepenthes alata Slippery Zone: Results from Measurement and Model Analysis

2021 ◽  
pp. 1-7
Author(s):  
Lixin Wang ◽  
Pan Pan ◽  
Shixing Yan ◽  
Shiyun Dong
Keyword(s):  
Contact Angle ◽  
Hierarchical Structures ◽  
Model Analysis ◽  
Contact Angle Measurement ◽  
Angle Measurement ◽  
Structure Characteristic ◽  
Baxter Equation ◽  
Measured Contact Angle ◽  
The Relationship ◽  
Contact Angle Analysis

The slippery zone of Nepenthes alata depends on its highly evolved morphology and structure to show remarkable superhydrophobicity, which has gradually become a biomimetic prototype for developing superhydrophobic materials. However, the mechanism governing this phenomenon has not been fully revealed through model analysis. In this paper, the superhydrophobicity of slippery zone is studied by contact angle measurement, morphology/structure examination and model analysis. The slippery zone causes ultrapure water droplet to produce a considerably high contact angle (155.11–158.30°), and has a micro-nano scale hierarchical structures consisting of lunate cells and wax coverings. According to the Cassie-Baxter equation and a self-defined infiltration coefficient, a model was established to analyze the effect of structure characteristic on the contact angle. Analysis result showed that the calculated contact angle (154.67–159.49°) was highly consistent with the measured contact angle, indicating that the established model can quantitatively characterize the relationship between the contact angle and the structure characteristic. Our study provides some evidences to further reveal the superhydrophobic mechanism of Nepenthes alata slippery zone, as well as inspires the biomimetic development of superhydrophobic surfaces.

Contact angle measurement on rough surfaces

2004 ◽  
Vol 274 (2) ◽  
pp. 637-644 ◽  
Author(s):  
Tammar S. Meiron ◽  
Abraham Marmur ◽  
I.Sam Saguy
Keyword(s):  
Contact Angle ◽  
Rough Surfaces ◽  
Contact Angle Measurement ◽  
Angle Measurement
Sign in / Sign up

Export Citation Format

Share Document