Advanced composite sandwich structure design for energy absorption applications: Blast protection and crashworthiness

2012 ◽  
Vol 43 (5) ◽  
pp. 2198-2208 ◽  
Author(s):  
F. Tarlochan ◽  
S. Ramesh ◽  
S. Harpreet
2021 ◽  
Vol 60 (1) ◽  
pp. 503-518
Author(s):  
Juan Han ◽  
Lu Zhu ◽  
Hai Fang ◽  
Jian Wang ◽  
Peng Wu

Abstract This article proposed an innovative composite sandwich structure reinforced with trapezoidal latticed webs with angles of 45°, 60° and 75°. Four specimens were conducted according to quasi-static compression methods to investigate the compressive behavior of the novel composite structures. The experimental results indicated that the specimen with 45° trapezoidal latticed webs showed the most excellent energy absorption ability, which was about 2.5 times of the structures with vertical latticed webs. Compared to the traditional composite sandwich structure, the elastic displacement and ultimate load-bearing capacity of the specimen with 45° trapezoidal latticed webs were increased by 624.1 and 439.8%, respectively. Numerical analysis of the composite sandwich structures was carried out by using a nonlinear explicit finite element (FE) software ANSYS/LS-DYNA. The influence of the thickness of face sheets, lattice webs and foam density on the elastic ultimate load-bearing capacity, the elastic displacement and initial stiffness was analyzed. This innovative composite bumper device for bridge pier protection against ship collision was simulated to verify its performance. The results showed that the peak impact force of the composite anti-collision device with 45° trapezoidal latticed webs would be reduced by 17.3%, and the time duration will be prolonged by about 31.1%.


2021 ◽  
pp. 109963622110288
Author(s):  
Meijuan Ji ◽  
Yanfeng Guo ◽  
Xuxiang Han ◽  
Yungang Fu ◽  
Jianfen Kang ◽  
...  

The paper composite sandwich structure with corrugation and honeycomb cores has been widely used in civil and national defense industries, and the cushioning energy absorption characteristic is a key indicator to evaluate the performance of this composite structure. Therefore, this paper is focus on the influences of honeycomb thickness on the shock acceleration response and deformation characteristics to analyze cushioning energy absorption performance of the composite structure by various experimental tests. The experimental result shows that, the paper corrugation layer firstly comes into crushed, and then the paper honeycomb layer is crushed. Additionally, the large honeycomb thickness may cause the secondary collapse of paper honeycomb layer. Under the same impact energy or impact mass, the cushioning energy absorption of the single-sided composite sandwich structure is better than that of the double-sided structure with the same honeycomb thickness. However, the impact resistance of the double-sided composite structure is better than that of the single-sided structure. For the paper composite sandwich structures with the honeycomb thicknesses 10, 15, 20 and 25 mm, the increase of honeycomb thickness would decrease the cushioning energy absorption of the whole structure under the drop impact with low energy. However, under the drop impact with high energy, the influence of honeycomb thickness on cushioning energy absorption is contrary. For the paper composite sandwich structure, the specific energy absorption, unit volume energy absorption, and stroke efficiency for the honeycomb thicknesses 10, 15, 20 and 25 mm are higher than those for the honeycomb thickness 70 mm. Therefore, the low honeycomb thickness is more advantageous for the cushioning energy absorption of paper composite sandwich structure.


2014 ◽  
Vol 118 (1202) ◽  
pp. 383-398 ◽  
Author(s):  
Y. Ren ◽  
J. Xiang

AbstractTo improve the crashworthiness of civil aircraft, the design concept of energy absorption structure for civil aircraft is investigated. Two typical different design principles could be identified. The first category includes Helicopter and Light fixed-wing Aircraft (HLA), and Transport, Mid-size and Commuter type Aircraft (TMCA) are classified into the second group. Frame, strut and bottom structure are the three kinds of energy absorption structure for TMCA. The strut layout of conventional civil aircraft is studied and some energy absorption devices are adopted. High efficiency energy absorption structures such as the foam and sine-wave beam are employed as the bottom structure for both of HLA and LMCA. The finite element method is used to analyse and design energy absorption structure in aircraft crashworthiness problem. Results show that the crashworthiness of civil aircraft could be largely improved by using proper strut layout and excellent energy absorption device. The stiffness combination of frame and strut should be considered to get better global aircraft deformation. Supporting platform and failure model are the two core problems of bottom energy absorption structure design. Foam and sine-wave beam under the lifted frame could improve the crashworthiness of civil aircraft.


2021 ◽  
Vol 2101 (1) ◽  
pp. 012087
Author(s):  
Peng Hao ◽  
Lin’an Li ◽  
Jianxun Du

Abstract In order to research the impact mechanical response characteristics of the bio-inspired composite sandwich structure, the hemispherical impactor is preloaded with different energy to impact bio-inspired and conventional composite sandwich structure, the stress distribution and dynamic response characteristics of composite sandwich structure under impact load are studied. The results show that the main damage of the upper panel is fiber shear fracture, while crushing fracture for the core, and the main damage of the lower panel is fiber tensile tearing under different impact load. The bio-inspired composite sandwich structure shows better impact resistance in terms of damage depth and maximum impact load under the same impact energy. From the perspective of energy consumption, the bio-inspired structure absorbed more energy than conventional structure under high energy impact.


Sign in / Sign up

Export Citation Format

Share Document