Effect of strain rate on the failure mechanisms and energy absorption in polymer composite elements under axial loading

2015 ◽  
Vol 122 ◽  
pp. 430-439 ◽  
Author(s):  
Matthew David ◽  
Alastair F. Johnson
Keyword(s):  
Strain Rate ◽  
Energy Absorption ◽  
Polymer Composite ◽  
Failure Mechanisms ◽  
Axial Loading

Energy Absorption at High Strain Rate of Magnesium Alloy AZ31B

2020 ◽  
Vol 12 (05) ◽  
Author(s):  
M. M. Mubasyir ◽  
◽  
M. F. Abdullah ◽  
K. Z. Ku Ahmad ◽  
R. N. R. Othman ◽  
...  
Keyword(s):  
Magnesium Alloy ◽  
High Strain Rate ◽  
Strain Rate ◽  
Energy Absorption ◽  
High Strain ◽  
Magnesium Alloy Az31b

Crush Response of Polyurethane Foam-Filled Aluminium Tube Subjected to Axial Loading

2014 ◽  
Vol 875-877 ◽  
pp. 534-541 ◽  
Author(s):  
Chawalit Thinvongpituk ◽  
Nirut Onsalung
Keyword(s):  
Energy Absorption ◽  
Polyurethane Foam ◽  
Testing Machine ◽  
Axial Loading ◽  
Asymmetric Mode ◽  
Pu Foam ◽  
Universal Testing ◽  
Collapse Mode ◽  
Empty Tube ◽  
Foam Filled

In this paper, the experimental investigation of polyurethane (PU) foam-filled into circular aluminum tubes subjected to axial crushing was presented. The purpose of this study is to improve the energy absorption of aluminium tube under axial quasi-static load. The aluminium tube was made from the AA6063-T5 aluminium alloy tubes. Each tube was filled with polyurethane foam. The density of foam was varied from 100, 150 and 200 kg/mP3P including with empty tube. The range of diameter/thickness (D/t) ratio of tube was varied from 15-55. The specimen were tested by quasi-static axial load with crush speed of 50 mm/min using the 2,000 kN universal testing machine. The load-displacement curves while testing were recorded for calculation. The mode of collapse of each specimen was analyzed concerning on foam density and the influence of D/t ratio. The results revealed that the tube with foam-filled provided significantly increment of the energy absorption than that of the empty tube. While the density of foam and D/t ratios increase, the tendency of collapse mode is transformed from asymmetric mode to concertina mode.

scholarly journals Static Mechanical Properties of Expanded Polypropylene Crushable Foam

Materials ◽  
2021 ◽  
Vol 14 (2) ◽  
pp. 249
Author(s):  
Przemysław Rumianek ◽  
Tomasz Dobosz ◽  
Radosław Nowak ◽  
Piotr Dziewit ◽  
Andrzej Aromiński
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
Strain Rate ◽  
Energy Absorption ◽  
Experimental Tests ◽  
Absorption Capacity ◽  
Strain Rates ◽  
Foam Density ◽  
Energy Absorption Capacity ◽  
Closed Cell

Closed-cell expanded polypropylene (EPP) foam is commonly used in car bumpers for the purpose of absorbing energy impacts. Characterization of the foam’s mechanical properties at varying strain rates is essential for selecting the proper material used as a protective structure in dynamic loading application. The aim of the study was to investigate the influence of loading strain rate, material density, and microstructure on compressive strength and energy absorption capacity for closed-cell polymeric foams. We performed quasi-static compressive strength tests with strain rates in the range of 0.2 to 25 mm/s, using a hydraulically controlled material testing system (MTS) for different foam densities in the range 20 g/dm3 to 220 g/dm3. The above tests were carried out as numerical simulation using ABAQUS software. The verification of the properties was carried out on the basis of experimental tests and simulations performed using the finite element method. The method of modelling the structure of the tested sample has an impact on the stress values. Experimental tests were performed for various loads and at various initial temperatures of the tested sample. We found that increasing both the strain rate of loading and foam density raised the compressive strength and energy absorption capacity. Increasing the ambient and tested sample temperature caused a decrease in compressive strength and energy absorption capacity. For the same foam density, differences in foam microstructures were causing differences in strength and energy absorption capacity when testing at the same loading strain rate. To sum up, tuning the microstructure of foams could be used to acquire desired global materials properties. Precise material description extends the possibility of using EPP foams in various applications.

Attempts to improve energy absorption characteristics of circular metal tubes subjected to axial loading

2010 ◽  
Vol 48 (6) ◽  
pp. 379-390 ◽  
Author(s):  
S. Salehghaffari ◽  
M. Tajdari ◽  
M. Panahi ◽  
F. Mokhtarnezhad
Keyword(s):  
Energy Absorption ◽  
Axial Loading ◽  
Absorption Characteristics

Effect of polymer foam anisotropy on energy absorption during combined shear-compression loading

2017 ◽  
Vol 54 (3) ◽  
pp. 597-613 ◽  
Author(s):  
Yasmine Mosleh ◽  
Kelly Vanden Bosche ◽  
Bart Depreitere ◽  
Jos Vander Sloten ◽  
Ignaas Verpoest ◽  
...  
Keyword(s):  
Energy Absorption ◽  
Transverse Shear ◽  
Axial Loading ◽  
Expanded Polystyrene ◽  
Polystyrene Foam ◽  
Polymer Foam ◽  
Expanded Polystyrene Foam ◽  
Shear Loads ◽  
Loading Direction ◽  
Compression Behaviour

Polymeric foams are extensively used in applications such as packaging, sports goods and sandwich structures. Since in-service loading conditions are often multi-axial, characterisation of foams under multi-axial loading is essential. In this article, quasi-static combined shear-compression behaviour of isotropic expanded polystyrene foam and anisotropic polyethersulfone foam was studied. For this, a testing apparatus which can apply combined compression and transverse shear loads was developed. The results revealed that the shear and compression energy absorption, yield stress and stiffness of foams are dependent on deformation angle. The total energy absorption of the anisotropic polyethersulfone foam is shown to be direction dependent in contrast to isotropic expanded polystyrene. Furthermore, for similar relative density, polyethersulfone foam absorbs more energy than expanded polystyrene foam, regardless of deformation angle. This study highlights the importance of correct positioning of foam cells in anisotropic foams with respect to loading direction to maximise energy absorption capability.

Sign in / Sign up

Export Citation Format

Share Document