Optimal water-cement ratio of cement-stabilized soil

2022 ◽  
Vol 320 ◽  
pp. 126211
Author(s):  
Fangtong Wang ◽  
Kaiqi Li ◽  
Yong Liu
Keyword(s):  
Cement Ratio ◽  
Water Cement Ratio ◽  
Stabilized Soil

scholarly journals Use of Nondestructive Testing of Ultrasound and Artificial Neural Networks to Estimate Compressive Strength of Concrete

Buildings ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 44
Author(s):  
Fernando A. N. Silva ◽  
João M. P. Q. Delgado ◽  
Rosely S. Cavalcanti ◽  
António C. Azevedo ◽  
Ana S. Guimarães ◽  
...  
Keyword(s):  
Neural Networks ◽  
Compressive Strength ◽  
Artificial Neural Networks ◽  
Cross Sections ◽  
Influential Factors ◽  
Average Error ◽  
Ann Model ◽  
Cement Ratio ◽  
Water Cement Ratio ◽  
Artificial Neural

The work presents the results of an experimental campaign carried out on concrete elements in order to investigate the potential of using artificial neural networks (ANNs) to estimate the compressive strength based on relevant parameters, such as the water–cement ratio, aggregate–cement ratio, age of testing, and percentage cement/metakaolin ratios (5% and 10%). We prepared 162 cylindrical concrete specimens with dimensions of 10 cm in diameter and 20 cm in height and 27 prismatic specimens with cross sections measuring 25 and 50 cm in length, with 9 different concrete mixture proportions. A longitudinal transducer with a frequency of 54 kHz was used to measure the ultrasonic velocities. An ANN model was developed, different ANN configurations were tested and compared to identify the best ANN model. Using this model, it was possible to assess the contribution of each input variable to the compressive strength of the tested concretes. The results indicate an excellent performance of the ANN model developed to predict compressive strength from the input parameters studied, with an average error less than 5%. Together, the water–cement ratio and the percentage of metakaolin were shown to be the most influential factors for the compressive strength value predicted by the developed ANN model.

Study on Preparation of Solid Concrete Brick with Recycled Aggregate

2013 ◽  
Vol 648 ◽  
pp. 108-111
Author(s):  
Qi Jin Li ◽  
Guo Zhong Li
Keyword(s):  
Compressive Strength ◽  
Mass Fraction ◽  
Recycled Aggregate ◽  
Preparation Process ◽  
Mass Ratio ◽  
Construction Waste ◽  
Cement Ratio ◽  
Water Cement Ratio ◽  
Optimal Value

The construction waste was processed into recycled aggregate to produce solid construction waste brick with grade of MU20. The preparation process of recycled aggregate and the optimal value of mass ratio of water to cement (water cement ratio) and mass ratio of recycled aggregate to cement was studied. The results shows that when the water cement ratio is 0.86 and the mass ratio of recycled aggregate to cement is 5.5 and the dosage of activator is 0.25% (mass fraction with recycled aggregate), the compressive strength of sample is 22.5MPa and can be satisfied with the requirement of MU20 solid concrete brick.

Assessment of Hydration Degree of Cement in the Fly Ash-Cement Pastes Based on the Calcium Hydroxide Content

2014 ◽  
Vol 875-877 ◽  
pp. 177-182 ◽  
Author(s):  
Xiang Li ◽  
Hua Quan Yang ◽  
Ming Xia Li
Keyword(s):  
Fly Ash ◽  
Calcium Hydroxide ◽  
Cement Hydration ◽  
Ash Content ◽  
Content Increase ◽  
Hydration Degree ◽  
Equilibrium Calculation ◽  
Cement Pastes ◽  
Cement Ratio ◽  
Water Cement Ratio

The hydration degree of fly ash and the calcium hydroxide (CH) content were measured. Combined with the equilibrium calculation of cement hydration, a new method for assessment of the hydration degree of cement in the fly ash-cement (FC) pastes based on the CH content was developed. The results reveal that as the fly ash content increase, the hydration degree of fly ash and the CH content decrease gradually; at the same time, the hydration degree of cement increase. The hydration degree of cement in the FC pastes containing a high content of fly ash (more than 35%) at 360 days is as high as 80%, even some of which hydrates nearly completely. The effect of water-cement ratio to the hydration degree of cement in the FC pastes is far less distinct than that of the content of fly ash.

scholarly journals Evaluation of cementitious repair mortars modified with polymers

2017 ◽  
Vol 9 (1) ◽  
pp. 168781401668858 ◽  
Author(s):  
Tsai-Lung Weng
Keyword(s):  
Thermal Expansion ◽  
Bond Strength ◽  
Vinyl Acetate ◽  
Polyvinyl Acetate ◽  
Setting Time ◽  
Drying Shrinkage ◽  
Ethylene Vinyl Acetate ◽  
Cement Ratio ◽  
Water Cement Ratio ◽  
Repair Mortars

The aim of this study was to evaluate the effects of added polymers on the properties of repair mortars. Two types of polymers, ethylene vinyl acetate and polyvinyl acetate–vinyl carboxylate, were used as a replacement for 3%, 5%, and 8% of the cement (by weight). All tests were conducted using two water–cement ratios of 0.5 and 0.6. The effectiveness of the repair materials was evaluated according to setting time, drying shrinkage, thermal expansion, compressive strength, and bond strength. Specimens containing polyvinyl acetate–vinyl carboxylate at a water–cement ratio of 0.5 presented the highest compressive and bond strength. Specimens containing ethylene vinyl acetate presented strength characteristics exceeding those of the control at 28 days. The drying shrinkage of polyvinyl acetate–vinyl carboxylate specimens was similar to that of the control. At a water–cement ratio of 0.5, the thermal expansion of polyvinyl acetate–vinyl carboxylate specimens was lower than that of ethylene vinyl acetate specimens; however, at a water–cement ratio of 0.6, the thermal expansion was independent of the type of polymer.

Innovations Based on PCC

2013 ◽  
Vol 687 ◽  
pp. 369-377 ◽  
Author(s):  
Andrea Dimmig-Osburg
Keyword(s):  
Mechanical Engineering ◽  
Field Tests ◽  
Innovative Development ◽  
Self Compacting Concrete ◽  
Cement Ratio ◽  
Water Cement Ratio ◽  
Innovation Potential ◽  
Acrylic Ester ◽  
Bridge Building ◽  
First Time

Abstract. In this paper, three examples for the application of PCC are presented, which exceed the well established use as restoration material and show the great innovation potential of these materials. The first example shows an innovative development of a polymer-modified self-compacting concrete (SPCC) for the restoration of vertical facing concrete surfaces. In the second example PCC was for the first time applied as construction concrete to a bridge building. The last instance describes the potential of the SPCC for special applications in mechanical engineering. A styrene acrylic ester dispersion and different sorts of cement were used. The polymer/cement-ratio varied from 0.05 to 0.10. The water/cement-ratio depended on the requirements of the different PCC. The essential laboratory and field tests as well as the results are described.

Sign in / Sign up

Export Citation Format

Share Document