scholarly journals Template-free sol–gel synthesis of high surface area mesoporous silica based catalysts for esterification of di-carboxylic acids

2016 ◽  
Vol 19 (10) ◽  
pp. 1247-1253 ◽  
Author(s):  
Pavan M. More ◽  
Shubhangi B. Umbarkar ◽  
Mohan K. Dongare
2008 ◽  
Vol 14 (20) ◽  
pp. 6205-6212 ◽  
Author(s):  
Damien Dambournet ◽  
Gehan Eltanamy ◽  
Alexandre Vimont ◽  
Jean-Claude Lavalley ◽  
Jean-Michel Goupil ◽  
...  

2017 ◽  
Vol 1 (8) ◽  
pp. 1662-1667 ◽  
Author(s):  
Felix Rechberger ◽  
Gabriele Ilari ◽  
Christoph Willa ◽  
Elena Tervoort ◽  
Markus Niederberger

We present the nonaqueous sol–gel synthesis of crystalline SrTi1−xCrxO3 (x = 0, 0.3, 2, 5, 10%) nanoparticles and their processing into highly concentrated dispersions in ethanol by surface functionalization with 2-[2-(2-methoxyethoxy) ethoxy] acetic acid (MEEAA).


Catalysts ◽  
2017 ◽  
Vol 7 (12) ◽  
pp. 376 ◽  
Author(s):  
Liang Jiang ◽  
Yizhou Li ◽  
Haiyan Yang ◽  
Yepeng Yang ◽  
Jun Liu ◽  
...  

2014 ◽  
Vol 2014 ◽  
pp. 1-6 ◽  
Author(s):  
Sang-wook Ui ◽  
In-seok Choi ◽  
Sung-churl Choi

Over the past several years, synthesized mesoporous nanosilica (SiO2) powders have been developed by many different methods. The methods include precipitation and microemulsion, the Stöber method, chemistry, and technology. In this study, mesoporous silica powders are synthesized by the sol-gel method. The sol-gel method obtains a high purity silica powder; however, the process yields a low percentage. Past syntheses of SiO2 powder precursors are expensive, but this study needs to find a replacement precursor for low cost alternatives. A high surface area was used to form an anion surfactant sodium dodecyl sulfate, which regulates the molar concentration. The particles size variability was changed by the precursor molar ratio of the sodium silicate solution with hydrochloric acid.


Author(s):  
Venkatachalam Chokkalingam ◽  
Boris Weidenhof ◽  
Wilhelm F. Maier ◽  
Stephan Herminghaus ◽  
Ralf Seemann

Droplet based microfluidics is used to perform sol-gel reactions. The chemicals are dispensed, mixed, and pre-processed inside a microfluidic device allowing for long operation times without any clogging. Using this approach and optimizing all reaction and processing parameters we generate mesoporous silica particles with a very high surface area of 820 m2g−1 and a narrow pore radius distribution of around 2.4 nm. To take full advantage of the possibilities offered by this microfluidic synthesis route, we produced platinum supported silica microspheres (as high as 7 mol. %) for heterogeneous catalysis.


Sign in / Sign up

Export Citation Format

Share Document